draft-ietf-rsvp-mib-02.txt   draft-ietf-rsvp-mib-03.txt 
RSVP Management Information Base RSVP Management Information Base
draft-ietf-rsvp-mib-02.txt draft-ietf-rsvp-mib-03.txt
Fri Jun 14 15:30:52 PDT 1996 Fri Nov 1 14:17:05 PST 1996
Fred Baker Fred Baker
Cisco Systems Cisco Systems
519 Lado Drive 519 Lado Drive
Santa Barbara, California 93111 Santa Barbara, California 93111
fred@cisco.com fred@cisco.com
John Krawczyk John Krawczyk
skipping to change at page 5, line 21 skipping to change at page 5, line 21
Integer32, experimental FROM SNMPv2-SMI Integer32, experimental FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeStamp, TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeStamp,
TestAndIncr, TimeInterval FROM SNMPv2-TC TestAndIncr, TimeInterval FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
BitRate, BurstSize FROM INTEGRATED-SERVICES-MIB BitRate, BurstSize FROM INTEGRATED-SERVICES-MIB
ifIndex, InterfaceIndex FROM IF-MIB; ifIndex, InterfaceIndex FROM IF-MIB;
rsvp MODULE-IDENTITY rsvp MODULE-IDENTITY
LAST-UPDATED "9511030500Z" -- Fri Jun 14 15:30:52 PDT 1996 LAST-UPDATED "9511030500Z" -- Fri Nov 1 14:17:05 PST 1996
ORGANIZATION "IETF RSVP Working Group" ORGANIZATION "IETF RSVP Working Group"
CONTACT-INFO CONTACT-INFO
" Fred Baker " Fred Baker
Postal: Cisco Systems Postal: Cisco Systems
519 Lado Drive 519 Lado Drive
Santa Barbara, California 93111 Santa Barbara, California 93111
Tel: +1 805 681 0115 Tel: +1 805 681 0115
E-Mail: fred@cisco.com E-Mail: fred@cisco.com
John Krawczyk John Krawczyk
Postal: Bay Networks, Inc Postal: Bay Networks, Inc
2 Federal Street 2 Federal Street
Billerica, Massachusetts 01821 Billerica, Massachusetts 01821
Tel: +1 508 436 3811 Tel: +1 508 916 3811
E-Mail: jj@BayNetworks.com" E-Mail: jj@BayNetworks.com"
DESCRIPTION DESCRIPTION
"The MIB module to describe the RSVP and In- "The MIB module to describe the RSVP Protocol"
tegrated Services Protocol"
::= { experimental 71 } ::= { experimental 71 }
rsvpObjects OBJECT IDENTIFIER ::= { rsvp 1 } -- tables rsvpObjects OBJECT IDENTIFIER ::= { rsvp 1 } -- tables
rsvpGenObjects OBJECT IDENTIFIER ::= { rsvp 2 } -- global objects rsvpGenObjects OBJECT IDENTIFIER ::= { rsvp 2 } -- global objects
rsvpNotifications OBJECT IDENTIFIER ::= { rsvp 3 } -- traps rsvpNotifications OBJECT IDENTIFIER ::= { rsvp 3 } -- traps
rsvpConformance OBJECT IDENTIFIER ::= { rsvp 4 } -- conformance rsvpConformance OBJECT IDENTIFIER ::= { rsvp 4 } -- conformance
SessionNumber ::= TEXTUAL-CONVENTION SessionNumber ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Session Number convention is used for "The Session Number convention is used for
skipping to change at page 7, line 9 skipping to change at page 7, line 9
IP6 address, one would expect all source, des- IP6 address, one would expect all source, des-
tination, and next/previous hop addresses to be tination, and next/previous hop addresses to be
16 bytes long, and for the ports to be UDP/TCP 16 bytes long, and for the ports to be UDP/TCP
port numbers, for example." port numbers, for example."
SYNTAX INTEGER (1..255) SYNTAX INTEGER (1..255)
Port ::= TEXTUAL-CONVENTION Port ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of the UDP or TCP Source or Destina- "The value of the UDP or TCP Source or Destina-
tion Port field, IPSEC SPI, or other session tion Port field, a virtual destination port or
discriminator. If it is not used, the value generalized port identifier used with the IPSEC
should be of length 0. This pair, when coupled Authentication Header or Encapsulating Security
with the IP Addresses of the source and desti- Payload, or other session discriminator. If it
nation system and the IP protocol field, is not used, the value should be of length 0.
uniquely identifies a data stream." This pair, when coupled with the IP Addresses
of the source and destination system and the IP
protocol field, uniquely identifies a data
stream."
SYNTAX OCTET STRING SYNTAX OCTET STRING
RsvpEncapsulation ::= TEXTUAL-CONVENTION RsvpEncapsulation ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the encapsulation that an RSVP "This indicates the encapsulation that an RSVP
Neighbor is perceived to be using." Neighbor is perceived to be using."
SYNTAX INTEGER { SYNTAX INTEGER {
ip (1), -- IP Protocol 46 ip (1), -- IP Protocol 46
udp (2), -- UDP Encapsulation udp (2), -- UDP Encapsulation
skipping to change at page 8, line 9 skipping to change at page 8, line 9
to elapse between refreshes of path or reserva- to elapse between refreshes of path or reserva-
tion state. Unrefreshed Path or reservation tion state. Unrefreshed Path or reservation
state is removed after a small multiple of this state is removed after a small multiple of this
period." period."
SYNTAX INTEGER (0..'7FFFFFFF'h) SYNTAX INTEGER (0..'7FFFFFFF'h)
QosService ::= TEXTUAL-CONVENTION QosService ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The class of service in use by a flow." "The class of service in use by a flow."
SYNTAX INTEGER { SYNTAX INTEGER {
controlledDelay (1), -- Controlled Delay
guaranteedDelay (2), -- Guaranteed Delay guaranteedDelay (2), -- Guaranteed Delay
predictiveDelay (3), -- Predictive Delay
controlledLoad (5) -- Controlled Load controlledLoad (5) -- Controlled Load
} }
DelayClass ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The class of delay used by the Controlled De-
lay Service."
SYNTAX INTEGER (1..3)
MessageSize ::= TEXTUAL-CONVENTION MessageSize ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The size of a message in bytes. This is used "The size of a message in bytes. This is used
to specify the minimum and maximum size of a to specify the minimum and maximum size of a
message along an integrated services route." message along an integrated services route."
SYNTAX INTEGER (0..'7FFFFFFF'h) SYNTAX INTEGER (0..'7FFFFFFF'h)
-- The RSVP Session Statistics Database displays statistics -- The RSVP Session Statistics Database displays statistics
skipping to change at page 10, line 23 skipping to change at page 10, line 23
rsvpSessionRequests Gauge32 rsvpSessionRequests Gauge32
} }
rsvpSessionNumber OBJECT-TYPE rsvpSessionNumber OBJECT-TYPE
SYNTAX SessionNumber SYNTAX SessionNumber
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of this session. This is for SNMP "The number of this session. This is for SNMP
Indexing purposes only and has no relation to Indexing purposes only and has no relation to
any protocol vaalue." any protocol value."
::= { rsvpSessionEntry 1 } ::= { rsvpSessionEntry 1 }
rsvpSessionType OBJECT-TYPE rsvpSessionType OBJECT-TYPE
SYNTAX SessionType SYNTAX SessionType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow "The type of session (IP4, IP6, IP6 with flow
information, etc), and therefore the structure information, etc)."
of the information."
::= { rsvpSessionEntry 2 } ::= { rsvpSessionEntry 2 }
rsvpSessionDestAddr OBJECT-TYPE rsvpSessionDestAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Destination Address used used by for all "The destination address used by all senders in
senders in this session." this session."
::= { rsvpSessionEntry 3 } ::= { rsvpSessionEntry 3 }
rsvpSessionProtocol OBJECT-TYPE rsvpSessionProtocol OBJECT-TYPE
SYNTAX Protocol SYNTAX Protocol
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP Protocol used by a session." "The IP Protocol used by this session."
::= { rsvpSessionEntry 4 } ::= { rsvpSessionEntry 4 }
rsvpSessionPort OBJECT-TYPE rsvpSessionPort OBJECT-TYPE
SYNTAX Port SYNTAX Port
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The UDP or TCP port number used as a destina- "The UDP or TCP port number used as a destina-
tion port for all senders in this session. A tion port for all senders in this session. If
value of zero indicates that the IP protocol in the IP protocol in use, specified by rsvpSen-
use, specified by rsvpSessionProtocol, does not derProtocol, is 50 (ESP) or 51 (AH), this
have ports." represents a virtual destination port number.
A value of zero indicates that the IP protocol
in use does not have ports."
::= { rsvpSessionEntry 5 } ::= { rsvpSessionEntry 5 }
rsvpSessionSenders OBJECT-TYPE rsvpSessionSenders OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of senders currently known to be "The number of senders currently known to be
part of this session." part of this session."
::= { rsvpSessionEntry 6 } ::= { rsvpSessionEntry 6 }
skipping to change at page 14, line 13 skipping to change at page 14, line 13
RsvpSenderEntry ::= RsvpSenderEntry ::=
SEQUENCE { SEQUENCE {
rsvpSenderNumber SessionNumber, rsvpSenderNumber SessionNumber,
rsvpSenderType SessionType, rsvpSenderType SessionType,
rsvpSenderDestAddr OCTET STRING, rsvpSenderDestAddr OCTET STRING,
rsvpSenderSenderAddr OCTET STRING, rsvpSenderSenderAddr OCTET STRING,
rsvpSenderProtocol Protocol, rsvpSenderProtocol Protocol,
rsvpSenderDestPort Port, rsvpSenderDestPort Port,
rsvpSenderPort Port, rsvpSenderPort Port,
rsvpSenderHopAddr OCTET STRING, rsvpSenderHopAddr OCTET STRING,
rsvpSenderHopLih Integer32,
rsvpSenderInterface InterfaceIndex, rsvpSenderInterface InterfaceIndex,
rsvpSenderTSpecRate BitRate, rsvpSenderTSpecRate BitRate,
rsvpSenderTSpecPeakRate BitRate, rsvpSenderTSpecPeakRate BitRate,
rsvpSenderTSpecBurst BurstSize, rsvpSenderTSpecBurst BurstSize,
rsvpSenderTSpecMinTU MessageSize, rsvpSenderTSpecMinTU MessageSize,
rsvpSenderTSpecMaxTU MessageSize, rsvpSenderTSpecMaxTU MessageSize,
rsvpSenderInterval RefreshInterval, rsvpSenderInterval RefreshInterval,
rsvpSenderRSVPHop TruthValue, rsvpSenderRSVPHop TruthValue,
rsvpSenderLastChange TimeStamp, rsvpSenderLastChange TimeStamp,
rsvpSenderPolicy OCTET STRING, rsvpSenderPolicy OCTET STRING,
rsvpSenderAdspec OCTET STRING, rsvpSenderAdspecBreak TruthValue,
rsvpSenderAdspecHopCount INTEGER,
rsvpSenderAdspecPathBw BitRate,
rsvpSenderAdspecMinLatency Integer32,
rsvpSenderAdspecMtu INTEGER,
rsvpSenderAdspecGuaranteedSvc TruthValue,
rsvpSenderAdspecGuaranteedBreak TruthValue,
rsvpSenderAdspecGuaranteedCtot Integer32,
rsvpSenderAdspecGuaranteedDtot Integer32,
rsvpSenderAdspecGuaranteedCsum Integer32,
rsvpSenderAdspecGuaranteedDsum Integer32,
rsvpSenderAdspecGuaranteedHopCount INTEGER,
rsvpSenderAdspecGuaranteedPathBw BitRate,
rsvpSenderAdspecGuaranteedMinLatency Integer32,
rsvpSenderAdspecGuaranteedMtu INTEGER,
rsvpSenderAdspecCtrlLoadSvc TruthValue,
rsvpSenderAdspecCtrlLoadBreak TruthValue,
rsvpSenderAdspecCtrlLoadHopCount INTEGER,
rsvpSenderAdspecCtrlLoadPathBw BitRate,
rsvpSenderAdspecCtrlLoadMinLatency Integer32,
rsvpSenderAdspecCtrlLoadMtu INTEGER,
rsvpSenderStatus RowStatus rsvpSenderStatus RowStatus
} }
rsvpSenderNumber OBJECT-TYPE rsvpSenderNumber OBJECT-TYPE
SYNTAX SessionNumber SYNTAX SessionNumber
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of this session. This is for SNMP "The number of this sender. This is for SNMP
Indexing purposes only and has no relation to Indexing purposes only and has no relation to
any protocol vaalue." any protocol vaalue."
::= { rsvpSenderEntry 1 } ::= { rsvpSenderEntry 1 }
rsvpSenderType OBJECT-TYPE rsvpSenderType OBJECT-TYPE
SYNTAX SessionType SYNTAX SessionType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow "The type of session (IP4, IP6, IP6 with flow
information, etc), and therefore the structure information, etc)."
of the information."
::= { rsvpSenderEntry 2 } ::= { rsvpSenderEntry 2 }
rsvpSenderDestAddr OBJECT-TYPE rsvpSenderDestAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Address used as a destination address by "The destination address used by all senders in
all senders in this session." this session."
::= { rsvpSenderEntry 3 } ::= { rsvpSenderEntry 3 }
rsvpSenderSenderAddr OBJECT-TYPE rsvpSenderSenderAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Address used as a source address by this "The source address used by this sender in this
sender in this session." session."
::= { rsvpSenderEntry 4 } ::= { rsvpSenderEntry 4 }
rsvpSenderProtocol OBJECT-TYPE rsvpSenderProtocol OBJECT-TYPE
SYNTAX Protocol SYNTAX Protocol
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP Protocol used by a session. for secure "The IP Protocol used by this session."
sessions, this indicates IP Security."
::= { rsvpSenderEntry 5 } ::= { rsvpSenderEntry 5 }
rsvpSenderDestPort OBJECT-TYPE rsvpSenderDestPort OBJECT-TYPE
SYNTAX Port SYNTAX Port
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The UDP or TCP port number used as a destina- "The UDP or TCP port number used as a destina-
tion port for all senders in this session. A tion port for all senders in this session. If
value of zero indicates that the IP protocol in the IP protocol in use, specified by rsvpSen-
use, specified by rsvpSessionProtocol, does not derProtocol, is 50 (ESP) or 51 (AH), this
have ports." represents a virtual destination port number.
A value of zero indicates that the IP protocol
in use does not have ports."
::= { rsvpSenderEntry 6 } ::= { rsvpSenderEntry 6 }
rsvpSenderPort OBJECT-TYPE rsvpSenderPort OBJECT-TYPE
SYNTAX Port SYNTAX Port
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The UDP or TCP port number used as a source "The UDP or TCP port number used as a source
port for this sender in this session. A value port for this sender in this session. If the
of zero indicates that the IP protocol in use, IP protocol in use, specified by rsvpSenderPro-
specified by rsvpSessionProtocol, does not have tocol is 50 (ESP) or 51 (AH), this represents a
ports." generalized port identifier (GPI). A value of
zero indicates that the IP protocol in use does
not have ports."
::= { rsvpSenderEntry 7 } ::= { rsvpSenderEntry 7 }
rsvpSenderHopAddr OBJECT-TYPE rsvpSenderHopAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The address used by the previous RSVP hop "The address used by the previous RSVP hop
(which may be the original sender)." (which may be the original sender)."
::= { rsvpSenderEntry 8 } ::= { rsvpSenderEntry 8 }
rsvpSenderHopLih OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Logical Interface Handle used by the pre-
vious RSVP hop (which may be the original
sender)."
::= { rsvpSenderEntry 9 }
rsvpSenderInterface OBJECT-TYPE rsvpSenderInterface OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ifIndex value of the interface on which "The ifIndex value of the interface on which
this PATH message was most recently received." this PATH message was most recently received."
::= { rsvpSenderEntry 9 } ::= { rsvpSenderEntry 10 }
rsvpSenderTSpecRate OBJECT-TYPE rsvpSenderTSpecRate OBJECT-TYPE
SYNTAX BitRate SYNTAX BitRate
UNITS "kilobits per second" UNITS "bits per second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Average Bit Rate of the sender's data "The Average Bit Rate of the sender's data
stream, in kilobits/second. Within a transmis- stream. Within a transmission burst, the ar-
sion burst, the arrival rate may be as fast as rival rate may be as fast as rsvpSenderTSpec-
rsvpSenderTSpecPeakRate (if supported by the PeakRate (if supported by the service model);
service model); however, averaged across two or however, averaged across two or more burst in-
more burst intervals, the rate should not tervals, the rate should not exceed rsvpSen-
exceed rsvpSenderTSpecRate. derTSpecRate.
Note that this is a prediction, often based on Note that this is a prediction, often based on
the general capability of a type of codec or the general capability of a type of codec or
particular encoding; the measured average rate particular encoding; the measured average rate
may be significantly lower." may be significantly lower."
::= { rsvpSenderEntry 10 } ::= { rsvpSenderEntry 11 }
rsvpSenderTSpecPeakRate OBJECT-TYPE rsvpSenderTSpecPeakRate OBJECT-TYPE
SYNTAX BitRate SYNTAX BitRate
UNITS "kilobits per second" UNITS "bits per second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Peak Bit Rate of the sender's data stream, "The Peak Bit Rate of the sender's data stream.
in kilobits/second. Traffic arrival is not ex- Traffic arrival is not expected to exceed this
pected to exceed this rate at any time, apart rate at any time, apart from the effects of
from the effects of jitter in the network. If jitter in the network. If not specified in the
not specified in the TSpec, this returns zero TSpec, this returns zero or noSuchValue."
or noSuchValue." ::= { rsvpSenderEntry 12 }
::= { rsvpSenderEntry 11 }
rsvpSenderTSpecBurst OBJECT-TYPE rsvpSenderTSpecBurst OBJECT-TYPE
SYNTAX BurstSize SYNTAX BurstSize
UNITS "bits" UNITS "bytes"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The size of the largest burst expected from "The size of the largest burst expected from
the sender at a time." the sender at a time."
::= { rsvpSenderEntry 12 } ::= { rsvpSenderEntry 13 }
rsvpSenderTSpecMinTU OBJECT-TYPE rsvpSenderTSpecMinTU OBJECT-TYPE
SYNTAX MessageSize SYNTAX MessageSize
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum message size for this flow. The "The minimum message size for this flow. The
policing algorithm will treat smaller messages policing algorithm will treat smaller messages
as though they are this size." as though they are this size."
::= { rsvpSenderEntry 13 } ::= { rsvpSenderEntry 14 }
rsvpSenderTSpecMaxTU OBJECT-TYPE rsvpSenderTSpecMaxTU OBJECT-TYPE
SYNTAX MessageSize SYNTAX MessageSize
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum message size for this flow. The "The maximum message size for this flow. The
admission algorithm will reject TSpecs whose admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU." headers, exceed the interface MTU."
::= { rsvpSenderEntry 14 } ::= { rsvpSenderEntry 15 }
rsvpSenderInterval OBJECT-TYPE rsvpSenderInterval OBJECT-TYPE
SYNTAX RefreshInterval SYNTAX RefreshInterval
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval between PATH receipt of refresh "The interval between refresh messages as ad-
messages as advertised by the Previous Hop." vertised by the Previous Hop."
::= { rsvpSenderEntry 15 } ::= { rsvpSenderEntry 16 }
rsvpSenderRSVPHop OBJECT-TYPE rsvpSenderRSVPHop OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If TRUE, the node believes that the previous "If TRUE, the node believes that the previous
hop is an RSVP hop. If FALSE, the node be- IP hop is an RSVP hop. If FALSE, the node be-
lieves that the previous hop may not be an RSVP lieves that the previous IP hop may not be an
hop." RSVP hop."
::= { rsvpSenderEntry 16 } ::= { rsvpSenderEntry 17 }
rsvpSenderLastChange OBJECT-TYPE rsvpSenderLastChange OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time of the last change in this PATH mes- "The time of the last change in this PATH mes-
sage; This includes the first time it was sent, sage; This is either the first time it was re-
or time of the most recent change in parame- ceived or the time of the most recent change in
ters." parameters."
::= { rsvpSenderEntry 17 } ::= { rsvpSenderEntry 18 }
rsvpSenderPolicy OBJECT-TYPE rsvpSenderPolicy OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The contents of the policy object, displayed "The contents of the policy object, displayed
as an uninterpreted string of octets, including as an uninterpreted string of octets, including
the object header. In the absence of such an the object header. In the absence of such an
object, this should be of zero length." object, this should be of zero length."
::= { rsvpSenderEntry 18 } ::= { rsvpSenderEntry 19 }
rsvpSenderAdspec OBJECT-TYPE
SYNTAX OCTET STRING rsvpSenderAdspecBreak OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The contents of the Advertising Specification "The global break bit general characterization
object, displayed as an uninterpreted string of parameter from the ADSPEC. If TRUE, at least
octets, including the object header. In the one non-IS hop was detected in the path. If
absence of such an object, this should be of FALSE, no non-IS hops were detected."
zero length." ::= { rsvpSenderEntry 20 }
::= { rsvpSenderEntry 19 } rsvpSenderAdspecHopCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The hop count general characterization parame-
ter from the ADSPEC. A return of zero or
noSuchValue indicates one of the following con-
ditions:
the invalid bit was set
the parameter was not present"
::= { rsvpSenderEntry 21 }
rsvpSenderAdspecPathBw OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The path bandwidth estimate general character-
ization parameter from the ADSPEC. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
the invalid bit was set
the parameter was not present"
::= { rsvpSenderEntry 22 }
rsvpSenderAdspecMinLatency OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum path latency general characteriza-
tion parameter from the ADSPEC. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
the invalid bit was set
the parameter was not present"
::= { rsvpSenderEntry 23 }
rsvpSenderAdspecMtu OBJECT-TYPE
SYNTAX INTEGER (0..65535)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The composed Maximum Transmission Unit general
characterization parameter from the ADSPEC. A
return of zero or noSuchValue indicates one of
the following conditions:
the invalid bit was set
the parameter was not present"
::= { rsvpSenderEntry 24 }
rsvpSenderAdspecGuaranteedSvc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If TRUE, the ADSPEC contains a Guaranteed Ser-
vice fragment. If FALSE, the ADSPEC does not
contain a Guaranteed Service fragment."
::= { rsvpSenderEntry 25 }
rsvpSenderAdspecGuaranteedBreak OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If TRUE, the Guaranteed Service fragment has
its 'break' bit set, indicating that one or
more nodes along the path do not support the
guaranteed service. If FALSE, and rsvpSen-
derAdspecGuaranteedSvc is TRUE, the 'break' bit
is not set.
If rsvpSenderAdspecGuaranteedSvc is FALSE, this
returns FALSE or noSuchValue."
::= { rsvpSenderEntry 26 }
rsvpSenderAdspecGuaranteedCtot OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecGuaranteedSvc is TRUE, this
is the end-to-end composed value for the
guaranteed service 'C' parameter. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 27 }
rsvpSenderAdspecGuaranteedDtot OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecGuaranteedSvc is TRUE, this
is the end-to-end composed value for the
guaranteed service 'D' parameter. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 28 }
rsvpSenderAdspecGuaranteedCsum OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecGuaranteedSvc is TRUE, this
is the composed value for the guaranteed ser-
vice 'C' parameter since the last reshaping
point. A return of zero or noSuchValue indi-
cates one of the following conditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 29 }
rsvpSenderAdspecGuaranteedDsum OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecGuaranteedSvc is TRUE, this
is the composed value for the guaranteed ser-
vice 'D' parameter since the last reshaping
point. A return of zero or noSuchValue indi-
cates one of the following conditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 30 }
rsvpSenderAdspecGuaranteedHopCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the hop
count general characterization parameter from
the ADSPEC. A return of zero or noSuchValue
indicates one of the following conditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 31 }
rsvpSenderAdspecGuaranteedPathBw OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the path
bandwidth estimate general characterization
parameter from the ADSPEC. A return of zero or
noSuchValue indicates one of the following con-
ditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 32 }
rsvpSenderAdspecGuaranteedMinLatency OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the minimum
path latency general characterization parameter
from the ADSPEC. A return of zero or noSuch-
Value indicates one of the following condi-
tions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 33 }
rsvpSenderAdspecGuaranteedMtu OBJECT-TYPE
SYNTAX INTEGER (0..65535)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the com-
posed Maximum Transmission Unit general charac-
terization parameter from the ADSPEC. A return
of zero or noSuchValue indicates one of the
following conditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 34 }
rsvpSenderAdspecCtrlLoadSvc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If TRUE, the ADSPEC contains a Controlled Load
Service fragment. If FALSE, the ADSPEC does
not contain a Controlled Load Service frag-
ment."
::= { rsvpSenderEntry 35 }
rsvpSenderAdspecCtrlLoadBreak OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If TRUE, the Controlled Load Service fragment
has its 'break' bit set, indicating that one or
more nodes along the path do not support the
controlled load service. If FALSE, and
rsvpSenderAdspecCtrlLoadSvc is TRUE, the
'break' bit is not set.
If rsvpSenderAdspecCtrlLoadSvc is FALSE, this
returns FALSE or noSuchValue."
::= { rsvpSenderEntry 36 }
rsvpSenderAdspecCtrlLoadHopCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the hop
count general characterization parameter from
the ADSPEC. A return of zero or noSuchValue
indicates one of the following conditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecCtrlLoadSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 37 }
rsvpSenderAdspecCtrlLoadPathBw OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the path
bandwidth estimate general characterization
parameter from the ADSPEC. A return of zero or
noSuchValue indicates one of the following con-
ditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecCtrlLoadSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 38 }
rsvpSenderAdspecCtrlLoadMinLatency OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the minimum
path latency general characterization parameter
from the ADSPEC. A return of zero or noSuch-
Value indicates one of the following condi-
tions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecCtrlLoadSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 39 }
rsvpSenderAdspecCtrlLoadMtu OBJECT-TYPE
SYNTAX INTEGER (0..65535)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rsvpSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the com-
posed Maximum Transmission Unit general charac-
terization parameter from the ADSPEC. A return
of zero or noSuchValue indicates one of the
following conditions:
the invalid bit was set
the parameter was not present
If rsvpSenderAdspecCtrlLoadSvc is FALSE, this
returns zero or noSuchValue."
::= { rsvpSenderEntry 40 }
rsvpSenderStatus OBJECT-TYPE rsvpSenderStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"'valid' for all active PATH messages. This "'valid' for all active PATH messages. This
object may be used to install static PATH in- object may be used to install static PATH in-
formation or delete PATH information." formation or delete PATH information."
::= { rsvpSenderEntry 20 } ::= { rsvpSenderEntry 41 }
-- The RSVP Reservation Requests Received Table contains the -- The RSVP Reservation Requests Received Table contains the
-- information displayed by receivers regarding their needs with -- information displayed by receivers regarding their needs with
-- respect to sessions and senders. It is in essence a list of the -- respect to sessions and senders. It is in essence a list of the
-- valid RESV messages that the RSVP Router or Host is receiving. -- valid RESV messages that the RSVP Router or Host is receiving.
rsvpResvNewIndex OBJECT-TYPE rsvpResvNewIndex OBJECT-TYPE
SYNTAX TestAndIncr SYNTAX TestAndIncr
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
skipping to change at page 22, line 14 skipping to change at page 32, line 14
RsvpResvEntry ::= RsvpResvEntry ::=
SEQUENCE { SEQUENCE {
rsvpResvNumber SessionNumber, rsvpResvNumber SessionNumber,
rsvpResvType SessionType, rsvpResvType SessionType,
rsvpResvDestAddr OCTET STRING, rsvpResvDestAddr OCTET STRING,
rsvpResvSenderAddr OCTET STRING, rsvpResvSenderAddr OCTET STRING,
rsvpResvProtocol Protocol, rsvpResvProtocol Protocol,
rsvpResvDestPort Port, rsvpResvDestPort Port,
rsvpResvPort Port, rsvpResvPort Port,
rsvpResvHopAddr OCTET STRING, rsvpResvHopAddr OCTET STRING,
rsvpResvHopLih Integer32,
rsvpResvInterface InterfaceIndex, rsvpResvInterface InterfaceIndex,
rsvpResvService QosService, rsvpResvService QosService,
rsvpResvTSpecRate BitRate, rsvpResvTSpecRate BitRate,
rsvpResvTSpecPeakRate BitRate, rsvpResvTSpecPeakRate BitRate,
rsvpResvTSpecBurst BurstSize, rsvpResvTSpecBurst BurstSize,
rsvpResvTSpecLevel DelayClass,
rsvpResvTSpecMinTU MessageSize, rsvpResvTSpecMinTU MessageSize,
rsvpResvTSpecMaxTU MessageSize, rsvpResvTSpecMaxTU MessageSize,
rsvpResvRSpecRate BitRate,
rsvpResvRSpecSlack Integer32,
rsvpResvInterval RefreshInterval, rsvpResvInterval RefreshInterval,
rsvpResvScope OCTET STRING, rsvpResvScope OCTET STRING,
rsvpResvShared TruthValue, rsvpResvShared TruthValue,
rsvpResvExplicit TruthValue, rsvpResvExplicit TruthValue,
rsvpResvRSVPHop TruthValue, rsvpResvRSVPHop TruthValue,
rsvpResvLastChange TimeStamp, rsvpResvLastChange TimeStamp,
rsvpResvPolicy OCTET STRING, rsvpResvPolicy OCTET STRING,
rsvpResvStatus RowStatus rsvpResvStatus RowStatus
} }
rsvpResvNumber OBJECT-TYPE rsvpResvNumber OBJECT-TYPE
SYNTAX SessionNumber SYNTAX SessionNumber
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of this session. This is for SNMP "The number of this reservation request. This
Indexing purposes only and has no relation to is for SNMP Indexing purposes only and has no
any protocol vaalue." relation to any protocol value."
::= { rsvpResvEntry 1 } ::= { rsvpResvEntry 1 }
rsvpResvType OBJECT-TYPE rsvpResvType OBJECT-TYPE
SYNTAX SessionType SYNTAX SessionType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow "The type of session (IP4, IP6, IP6 with flow
information, etc), and therefore the structure information, etc)."
of the information."
::= { rsvpResvEntry 2 } ::= { rsvpResvEntry 2 }
rsvpResvDestAddr OBJECT-TYPE rsvpResvDestAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Address used as a destination address by "The destination address used by all senders in
all senders in this session." this session."
::= { rsvpResvEntry 3 } ::= { rsvpResvEntry 3 }
rsvpResvSenderAddr OBJECT-TYPE rsvpResvSenderAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Address used as a source address by this "The source address of the sender selected by
sender in this session. The value of all this reservation. The value of all zeroes in-
zeroes indicates 'any sender'." dicates 'all senders'."
::= { rsvpResvEntry 4 } ::= { rsvpResvEntry 4 }
rsvpResvProtocol OBJECT-TYPE rsvpResvProtocol OBJECT-TYPE
SYNTAX Protocol SYNTAX Protocol
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP Protocol used by a session. for secure "The IP Protocol used by this session."
sessions, this indicates IP Security."
::= { rsvpResvEntry 5 } ::= { rsvpResvEntry 5 }
rsvpResvDestPort OBJECT-TYPE rsvpResvDestPort OBJECT-TYPE
SYNTAX Port SYNTAX Port
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The UDP or TCP port number used as a destina- "The UDP or TCP port number used as a destina-
tion port for all senders in this session. A tion port for all senders in this session. If
value of zero indicates that the IP protocol in the IP protocol in use, specified by
use, specified by rsvpSessionProtocol, does not rsvpResvProtocol, is 50 (ESP) or 51 (AH), this
have ports." represents a virtual destination port number.
A value of zero indicates that the IP protocol
in use does not have ports."
::= { rsvpResvEntry 6 } ::= { rsvpResvEntry 6 }
rsvpResvPort OBJECT-TYPE rsvpResvPort OBJECT-TYPE
SYNTAX Port SYNTAX Port
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The UDP or TCP port number used as a source "The UDP or TCP port number used as a source
port for this sender in this session. A value port for this sender in this session. If the
of zero indicates that the IP protocol in use, IP protocol in use, specified by rsvpResvProto-
specified by rsvpSessionProtocol, does not have col is 50 (ESP) or 51 (AH), this represents a
ports or the port is being ignored." generalized port identifier (GPI). A value of
zero indicates that the IP protocol in use does
not have ports."
::= { rsvpResvEntry 7 } ::= { rsvpResvEntry 7 }
rsvpResvHopAddr OBJECT-TYPE rsvpResvHopAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The address used by the next RSVP hop (which "The address used by the next RSVP hop (which
may be the ultimate receiver)." may be the ultimate receiver)."
::= { rsvpResvEntry 8 } ::= { rsvpResvEntry 8 }
rsvpResvHopLih OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Logical Interface Handle received from the
previous RSVP hop (which may be the ultimate
receiver)."
::= { rsvpResvEntry 9 }
rsvpResvInterface OBJECT-TYPE rsvpResvInterface OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ifIndex value of the interface on which "The ifIndex value of the interface on which
this RESV message was most recently received." this RESV message was most recently received."
::= { rsvpResvEntry 9 } ::= { rsvpResvEntry 10 }
rsvpResvService OBJECT-TYPE rsvpResvService OBJECT-TYPE
SYNTAX QosService SYNTAX QosService
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The QoS Service classification requested by "The QoS Service classification requested by
the receiver." the receiver."
::= { rsvpResvEntry 10 } ::= { rsvpResvEntry 11 }
rsvpResvTSpecRate OBJECT-TYPE rsvpResvTSpecRate OBJECT-TYPE
SYNTAX BitRate SYNTAX BitRate
UNITS "kilobits per second" UNITS "bits per second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Average Bit Rate of the sender's data "The Average Bit Rate of the sender's data
stream, in kilobits/second. Within a transmis- stream. Within a transmission burst, the ar-
sion burst, the arrival rate may be as fast as rival rate may be as fast as rsvpResvTSpec-
rsvpResvTSpecPeakRate (if supported by the ser- PeakRate (if supported by the service model);
vice model); however, averaged across two or however, averaged across two or more burst in-
more burst intervals, the rate should not tervals, the rate should not exceed
exceed rsvpResvTSpecRate. rsvpResvTSpecRate.
Note that this is a prediction, often based on Note that this is a prediction, often based on
the general capability of a type of codec or the general capability of a type of codec or
particular encoding; the measured average rate particular encoding; the measured average rate
may be significantly lower." may be significantly lower."
::= { rsvpResvEntry 11 } ::= { rsvpResvEntry 12 }
rsvpResvTSpecPeakRate OBJECT-TYPE rsvpResvTSpecPeakRate OBJECT-TYPE
SYNTAX BitRate SYNTAX BitRate
UNITS "kilobits per second" UNITS "bits per second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Peak Bit Rate of the sender's data stream, "The Peak Bit Rate of the sender's data stream.
in kilobits/second. Traffic arrival is not ex- Traffic arrival is not expected to exceed this
pected to exceed this rate at any time, apart rate at any time, apart from the effects of
from the effects of jitter in the network. If jitter in the network. If not specified in the
not specified in the TSpec, this returns zero TSpec, this returns zero or noSuchValue."
or noSuchValue." ::= { rsvpResvEntry 13 }
::= { rsvpResvEntry 12 }
rsvpResvTSpecBurst OBJECT-TYPE rsvpResvTSpecBurst OBJECT-TYPE
SYNTAX BurstSize SYNTAX BurstSize
UNITS "bits" UNITS "bytes"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The size of the largest burst expected from "The size of the largest burst expected from
the sender at a time. the sender at a time.
If this is less than the sender's advertised If this is less than the sender's advertised
burst size, the receiver is asking the network burst size, the receiver is asking the network
to provide flow pacing beyond what would be to provide flow pacing beyond what would be
provided under normal circumstances. Such pac- provided under normal circumstances. Such pac-
ing is at the network's option." ing is at the network's option."
::= { rsvpResvEntry 13 }
rsvpResvTSpecLevel OBJECT-TYPE
SYNTAX DelayClass
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the service is predictive or controlled-
delay, this is the service level that is being
requested. Otherwise, it is zero, or the agent
may return noSuchValue."
::= { rsvpResvEntry 14 } ::= { rsvpResvEntry 14 }
rsvpResvTSpecMinTU OBJECT-TYPE rsvpResvTSpecMinTU OBJECT-TYPE
SYNTAX MessageSize SYNTAX MessageSize
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum message size for this flow. The "The minimum message size for this flow. The
policing algorithm will treat smaller messages policing algorithm will treat smaller messages
as though they are this size." as though they are this size."
skipping to change at page 27, line 14 skipping to change at page 38, line 4
rsvpResvTSpecMaxTU OBJECT-TYPE rsvpResvTSpecMaxTU OBJECT-TYPE
SYNTAX MessageSize SYNTAX MessageSize
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum message size for this flow. The "The maximum message size for this flow. The
admission algorithm will reject TSpecs whose admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU." headers, exceed the interface MTU."
::= { rsvpResvEntry 16 } ::= { rsvpResvEntry 16 }
rsvpResvRSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the requested service is Guaranteed, as
specified by rsvpResvService, this is the
clearing rate that is being requested. Other-
wise, it is zero, or the agent may return
noSuchValue."
::= { rsvpResvEntry 17 }
rsvpResvRSpecSlack OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the requested service is Guaranteed, as
specified by rsvpResvService, this is the delay
slack. Otherwise, it is zero, or the agent may
return noSuchValue."
::= { rsvpResvEntry 18 }
rsvpResvInterval OBJECT-TYPE rsvpResvInterval OBJECT-TYPE
SYNTAX RefreshInterval SYNTAX RefreshInterval
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval between RESV receipt of refresh "The interval between refresh messages as ad-
messages as advertised by the Next Hop." vertised by the Next Hop."
::= { rsvpResvEntry 17 } ::= { rsvpResvEntry 19 }
rsvpResvScope OBJECT-TYPE rsvpResvScope OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The contents of the scope object, displayed as "The contents of the scope object, displayed as
an uninterpreted string of octets, including an uninterpreted string of octets, including
the object header. In the absence of such an the object header. In the absence of such an
object, this should be of zero length." object, this should be of zero length.
::= { rsvpResvEntry 18 }
If the length is non-zero, this contains a
series of IP4 or IP6 addresses."
::= { rsvpResvEntry 20 }
rsvpResvShared OBJECT-TYPE rsvpResvShared OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If TRUE, a reservation shared among senders is "If TRUE, a reservation shared among senders is
requested. If FALSE, a reservation specific to requested. If FALSE, a reservation specific to
this sender is requested." this sender is requested."
::= { rsvpResvEntry 19 } ::= { rsvpResvEntry 21 }
rsvpResvExplicit OBJECT-TYPE rsvpResvExplicit OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If TRUE, individual senders are listed using "If TRUE, individual senders are listed using
Filter Specifications. If FALSE, senders are Filter Specifications. If FALSE, all senders
listed in the Scope Object." are implicitly selected. The Scope Object will
::= { rsvpResvEntry 20 } contain a list of senders that need to receive
this reservation request for the purpose of
routing the RESV message."
::= { rsvpResvEntry 22 }
rsvpResvRSVPHop OBJECT-TYPE rsvpResvRSVPHop OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If TRUE, the node believes that the next hop "If TRUE, the node believes that the previous
is an RSVP hop. If FALSE, the node believes IP hop is an RSVP hop. If FALSE, the node be-
that the next hop may not be an RSVP hop." lieves that the previous IP hop may not be an
::= { rsvpResvEntry 21 } RSVP hop."
::= { rsvpResvEntry 23 }
rsvpResvLastChange OBJECT-TYPE rsvpResvLastChange OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time of the last change in this reserva- "The time of the last change in this reserva-
tion request; This includes the first time it tion request; This is either the first time it
was received, or time of the most recent change was received or the time of the most recent
in parameters." change in parameters."
::= { rsvpResvEntry 22 } ::= { rsvpResvEntry 24 }
rsvpResvPolicy OBJECT-TYPE rsvpResvPolicy OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The contents of the policy object, displayed "The contents of the policy object, displayed
as an uninterpreted string of octets, including as an uninterpreted string of octets, including
the object header. In the absence of such an the object header. In the absence of such an
object, this should be of zero length." object, this should be of zero length."
::= { rsvpResvEntry 23 } ::= { rsvpResvEntry 25 }
rsvpResvStatus OBJECT-TYPE rsvpResvStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"'valid' for all active RESV messages. This "'valid' for all active RESV messages. This
object may be used to install static RESV in- object may be used to install static RESV in-
formation or delete RESV information." formation or delete RESV information."
::= { rsvpResvEntry 24 } ::= { rsvpResvEntry 26 }
-- The RSVP Reservation Requests Forwarded Table contains the -- The RSVP Reservation Requests Forwarded Table contains the
-- information displayed by receivers regarding their needs with -- information displayed by receivers regarding their needs with
-- respect to sessions and senders. It is in essence a list of the -- respect to sessions and senders. It is in essence a list of the
-- valid RESV messages that the RSVP Router or Host is sending -- valid RESV messages that the RSVP Router or Host is sending
-- to its upstream neighbors. -- to its upstream neighbors.
rsvpResvFwdNewIndex OBJECT-TYPE rsvpResvFwdNewIndex OBJECT-TYPE
SYNTAX TestAndIncr SYNTAX TestAndIncr
MAX-ACCESS read-write MAX-ACCESS read-write
skipping to change at page 31, line 24 skipping to change at page 43, line 24
RsvpResvFwdEntry ::= RsvpResvFwdEntry ::=
SEQUENCE { SEQUENCE {
rsvpResvFwdNumber SessionNumber, rsvpResvFwdNumber SessionNumber,
rsvpResvFwdType SessionType, rsvpResvFwdType SessionType,
rsvpResvFwdDestAddr OCTET STRING, rsvpResvFwdDestAddr OCTET STRING,
rsvpResvFwdSenderAddr OCTET STRING, rsvpResvFwdSenderAddr OCTET STRING,
rsvpResvFwdProtocol Protocol, rsvpResvFwdProtocol Protocol,
rsvpResvFwdDestPort Port, rsvpResvFwdDestPort Port,
rsvpResvFwdPort Port, rsvpResvFwdPort Port,
rsvpResvFwdHopAddr OCTET STRING,
rsvpResvFwdHopLih Integer32,
rsvpResvFwdInterface InterfaceIndex, rsvpResvFwdInterface InterfaceIndex,
rsvpResvFwdService QosService, rsvpResvFwdService QosService,
rsvpResvFwdTSpecRate BitRate, rsvpResvFwdTSpecRate BitRate,
rsvpResvFwdTSpecPeakRate BitRate, rsvpResvFwdTSpecPeakRate BitRate,
rsvpResvFwdTSpecBurst BurstSize, rsvpResvFwdTSpecBurst BurstSize,
rsvpResvFwdTSpecLevel DelayClass,
rsvpResvFwdTSpecMinTU MessageSize, rsvpResvFwdTSpecMinTU MessageSize,
rsvpResvFwdTSpecMaxTU MessageSize, rsvpResvFwdTSpecMaxTU MessageSize,
rsvpResvFwdRSpecRate BitRate,
rsvpResvFwdRSpecSlack Integer32,
rsvpResvFwdInterval RefreshInterval, rsvpResvFwdInterval RefreshInterval,
rsvpResvFwdScope OCTET STRING, rsvpResvFwdScope OCTET STRING,
rsvpResvFwdShared TruthValue, rsvpResvFwdShared TruthValue,
rsvpResvFwdExplicit TruthValue, rsvpResvFwdExplicit TruthValue,
rsvpResvFwdRSVPHop TruthValue, rsvpResvFwdRSVPHop TruthValue,
rsvpResvFwdLastChange TimeStamp, rsvpResvFwdLastChange TimeStamp,
rsvpResvFwdPolicy OCTET STRING, rsvpResvFwdPolicy OCTET STRING,
rsvpResvFwdStatus RowStatus rsvpResvFwdStatus RowStatus
} }
rsvpResvFwdNumber OBJECT-TYPE rsvpResvFwdNumber OBJECT-TYPE
SYNTAX SessionNumber SYNTAX SessionNumber
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of this session. This is for SNMP "The number of this reservation request. This
Indexing purposes only and has no relation to is for SNMP Indexing purposes only and has no
any protocol vaalue." relation to any protocol vaalue."
::= { rsvpResvFwdEntry 1 } ::= { rsvpResvFwdEntry 1 }
rsvpResvFwdType OBJECT-TYPE rsvpResvFwdType OBJECT-TYPE
SYNTAX SessionType SYNTAX SessionType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow "The type of session (IP4, IP6, IP6 with flow
information, etc), and therefore the structure information, etc)."
of the information."
::= { rsvpResvFwdEntry 2 } ::= { rsvpResvFwdEntry 2 }
rsvpResvFwdDestAddr OBJECT-TYPE rsvpResvFwdDestAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Address used as a destination address by "The destination address used by all senders in
all senders in this session." this session."
::= { rsvpResvFwdEntry 3 } ::= { rsvpResvFwdEntry 3 }
rsvpResvFwdSenderAddr OBJECT-TYPE rsvpResvFwdSenderAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Address used as a source address by this "The source address of the sender selected by
sender in this session. The value 0 designates this reservation. The value of all zeroes in-
'any sender'." dicates 'all senders'."
::= { rsvpResvFwdEntry 4 } ::= { rsvpResvFwdEntry 4 }
rsvpResvFwdProtocol OBJECT-TYPE rsvpResvFwdProtocol OBJECT-TYPE
SYNTAX Protocol SYNTAX Protocol
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP Protocol used by a session. for secure "The IP Protocol used by a session. for secure
sessions, this indicates IP Security." sessions, this indicates IP Security."
::= { rsvpResvFwdEntry 5 } ::= { rsvpResvFwdEntry 5 }
rsvpResvFwdDestPort OBJECT-TYPE rsvpResvFwdDestPort OBJECT-TYPE
SYNTAX Port SYNTAX Port
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The UDP or TCP port number used as a destina- "The UDP or TCP port number used as a destina-
tion port for all senders in this session. A tion port for all senders in this session. If
value of zero indicates that the IP protocol in the IP protocol in use, specified by
use, specified by rsvpSessionProtocol, does not rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH),
have ports." this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports."
::= { rsvpResvFwdEntry 6 } ::= { rsvpResvFwdEntry 6 }
rsvpResvFwdPort OBJECT-TYPE rsvpResvFwdPort OBJECT-TYPE
SYNTAX Port SYNTAX Port
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The UDP or TCP port number used as a source "The UDP or TCP port number used as a source
port for this sender in this session. A value port for this sender in this session. If the
of zero indicates that the IP protocol in use, IP protocol in use, specified by
specified by rsvpSessionProtocol, does not have rsvpResvFwdProtocol is 50 (ESP) or 51 (AH),
ports." this represents a generalized port identifier
(GPI). A value of zero indicates that the IP
protocol in use does not have ports."
::= { rsvpResvFwdEntry 7 } ::= { rsvpResvFwdEntry 7 }
rsvpResvFwdHopAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the (previous) RSVP that will
receive this message."
::= { rsvpResvFwdEntry 8 }
rsvpResvFwdHopLih OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Logical Interface Handle sent to the (pre-
vious) RSVP that will receive this message."
::= { rsvpResvFwdEntry 9 }
rsvpResvFwdInterface OBJECT-TYPE rsvpResvFwdInterface OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ifIndex value of the interface on which "The ifIndex value of the interface on which
this RESV message was most recently sent." this RESV message was most recently sent."
::= { rsvpResvFwdEntry 8 } ::= { rsvpResvFwdEntry 10 }
rsvpResvFwdService OBJECT-TYPE rsvpResvFwdService OBJECT-TYPE
SYNTAX QosService SYNTAX QosService
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The QoS Service classification requested." "The QoS Service classification requested."
::= { rsvpResvFwdEntry 9 } ::= { rsvpResvFwdEntry 11 }
rsvpResvFwdTSpecRate OBJECT-TYPE rsvpResvFwdTSpecRate OBJECT-TYPE
SYNTAX BitRate SYNTAX BitRate
UNITS "kilobits per second" UNITS "bits per second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Average Bit Rate of the sender's data "The Average Bit Rate of the sender's data
stream, in kilobits/second. Within a transmis- stream. Within a transmission burst, the ar-
sion burst, the arrival rate may be as fast as rival rate may be as fast as rsvpResvFwdTSpec-
rsvpResvFwdTSpecPeakRate (if supported by the PeakRate (if supported by the service model);
service model); however, averaged across two or however, averaged across two or more burst in-
more burst intervals, the rate should not tervals, the rate should not exceed
exceed rsvpResvFwdTSpecRate. rsvpResvFwdTSpecRate.
Note that this is a prediction, often based on Note that this is a prediction, often based on
the general capability of a type of codec or the general capability of a type of codec or
particular encoding; the measured average rate particular encoding; the measured average rate
may be significantly lower." may be significantly lower."
::= { rsvpResvFwdEntry 10 } ::= { rsvpResvFwdEntry 12 }
rsvpResvFwdTSpecPeakRate OBJECT-TYPE rsvpResvFwdTSpecPeakRate OBJECT-TYPE
SYNTAX BitRate SYNTAX BitRate
UNITS "kilobits per second" UNITS "bits per second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Peak Bit Rate of the sender's data stream, "The Peak Bit Rate of the sender's data stream
in kilobits/second. Traffic arrival is not ex- Traffic arrival is not expected to exceed this
pected to exceed this rate at any time, apart rate at any time, apart from the effects of
from the effects of jitter in the network. If jitter in the network. If not specified in the
not specified in the TSpec, this returns zero TSpec, this returns zero or noSuchValue."
or noSuchValue." ::= { rsvpResvFwdEntry 13 }
::= { rsvpResvFwdEntry 11 }
rsvpResvFwdTSpecBurst OBJECT-TYPE rsvpResvFwdTSpecBurst OBJECT-TYPE
SYNTAX BurstSize SYNTAX BurstSize
UNITS "bits" UNITS "bytes"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The size of the largest burst expected from "The size of the largest burst expected from
the sender at a time. the sender at a time.
If this is less than the sender's advertised If this is less than the sender's advertised
burst size, the receiver is asking the network burst size, the receiver is asking the network
to provide flow pacing beyond what would be to provide flow pacing beyond what would be
provided under normal circumstances. Such pac- provided under normal circumstances. Such pac-
ing is at the network's option." ing is at the network's option."
::= { rsvpResvFwdEntry 12 } ::= { rsvpResvFwdEntry 14 }
rsvpResvFwdTSpecLevel OBJECT-TYPE
SYNTAX DelayClass
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the service is predictive or controlled-
delay, this is the service level that is being
requested. Otherwise, it is zero, or the agent
may return noSuchValue."
::= { rsvpResvFwdEntry 13 }
rsvpResvFwdTSpecMinTU OBJECT-TYPE rsvpResvFwdTSpecMinTU OBJECT-TYPE
SYNTAX MessageSize SYNTAX MessageSize
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum message size for this flow. The "The minimum message size for this flow. The
policing algorithm will treat smaller messages policing algorithm will treat smaller messages
as though they are this size." as though they are this size."
::= { rsvpResvFwdEntry 14 } ::= { rsvpResvFwdEntry 15 }
rsvpResvFwdTSpecMaxTU OBJECT-TYPE rsvpResvFwdTSpecMaxTU OBJECT-TYPE
SYNTAX MessageSize SYNTAX MessageSize
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum message size for this flow. The "The maximum message size for this flow. The
admission algorithm will reject TSpecs whose admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU." headers, exceed the interface MTU."
::= { rsvpResvFwdEntry 15 } ::= { rsvpResvFwdEntry 16 }
rsvpResvFwdRSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bytes per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the requested service is Guaranteed, as
specified by rsvpResvService, this is the
clearing rate that is being requested. Other-
wise, it is zero, or the agent may return
noSuchValue."
::= { rsvpResvFwdEntry 17 }
rsvpResvFwdRSpecSlack OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the requested service is Guaranteed, as
specified by rsvpResvService, this is the delay
slack. Otherwise, it is zero, or the agent may
return noSuchValue."
::= { rsvpResvFwdEntry 18 }
rsvpResvFwdInterval OBJECT-TYPE rsvpResvFwdInterval OBJECT-TYPE
SYNTAX RefreshInterval SYNTAX RefreshInterval
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval between RESV receipt of refresh "The interval between refresh messages adver-
messages advertised to the Previous Hop." tised to the Previous Hop."
::= { rsvpResvFwdEntry 16 } ::= { rsvpResvFwdEntry 19 }
rsvpResvFwdScope OBJECT-TYPE rsvpResvFwdScope OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The contents of the scope object, displayed as "The contents of the scope object, displayed as
an uninterpreted string of octets, including an uninterpreted string of octets, including
the object header. In the absence of such an the object header. In the absence of such an
object, this should be of zero length." object, this should be of zero length."
::= { rsvpResvFwdEntry 17 } ::= { rsvpResvFwdEntry 20 }
rsvpResvFwdShared OBJECT-TYPE rsvpResvFwdShared OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If TRUE, a reservation shared among senders is "If TRUE, a reservation shared among senders is
requested. If FALSE, a reservation specific to requested. If FALSE, a reservation specific to
this sender is requested." this sender is requested."
::= { rsvpResvFwdEntry 18 } ::= { rsvpResvFwdEntry 21 }
rsvpResvFwdExplicit OBJECT-TYPE rsvpResvFwdExplicit OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If TRUE, individual senders are listed using "If TRUE, individual senders are listed using
Filter Specifications. If FALSE, senders are Filter Specifications. If FALSE, all senders
listed in the Scope Object." are implicitly selected. The Scope Object will
::= { rsvpResvFwdEntry 19 } contain a list of senders that need to receive
this reservation request for the purpose of
routing the RESV message."
::= { rsvpResvFwdEntry 22 }
rsvpResvFwdRSVPHop OBJECT-TYPE rsvpResvFwdRSVPHop OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If TRUE, the node believes that the next hop "If TRUE, the node believes that the next IP
is an RSVP hop. If FALSE, the node believes hop is an RSVP hop. If FALSE, the node be-
that the next hop may not be an RSVP hop." lieves that the next IP hop may not be an RSVP
::= { rsvpResvFwdEntry 20 } hop."
::= { rsvpResvFwdEntry 23 }
rsvpResvFwdLastChange OBJECT-TYPE rsvpResvFwdLastChange OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time of the last change in this request; "The time of the last change in this request;
This includes the first time it was requested, This is either the first time it was sent or
or time of the most recent change in parameters the time of the most recent change in parame-
requested." ters."
::= { rsvpResvFwdEntry 21 } ::= { rsvpResvFwdEntry 24 }
rsvpResvFwdPolicy OBJECT-TYPE rsvpResvFwdPolicy OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The contents of the policy object, displayed "The contents of the policy object, displayed
as an uninterpreted string of octets, including as an uninterpreted string of octets, including
the object header. In the absence of such an the object header. In the absence of such an
object, this should be of zero length." object, this should be of zero length."
::= { rsvpResvFwdEntry 22 } ::= { rsvpResvFwdEntry 25 }
rsvpResvFwdStatus OBJECT-TYPE rsvpResvFwdStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"'valid' for all active RESV messages. This "'valid' for all active RESV messages. This
object may be used to install static RESV in- object may be used to install static RESV in-
formation or delete RESV information." formation or delete RESV information."
::= { rsvpResvFwdEntry 23 } ::= { rsvpResvFwdEntry 26 }
-- The RSVP Active Flows Database -- The RSVP Active Flows Database
-- lists all flows active on an outgoing interface, including -- lists all flows active on an outgoing interface, including
-- relevant attributes. -- relevant attributes.
rsvpFlowTable OBJECT-TYPE rsvpFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpFlowEntry SYNTAX SEQUENCE OF RsvpFlowEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 40, line 9 skipping to change at page 54, line 9
rsvpFlowQueue Integer32, rsvpFlowQueue Integer32,
rsvpFlowMinTU MessageSize, rsvpFlowMinTU MessageSize,
rsvpFlowDontAsk TimeInterval, rsvpFlowDontAsk TimeInterval,
rsvpFlowStatus RowStatus rsvpFlowStatus RowStatus
} }
rsvpFlowNumber OBJECT-TYPE rsvpFlowNumber OBJECT-TYPE
SYNTAX SessionNumber SYNTAX SessionNumber
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of this session. This is for SNMP "The number of this flow. This is for SNMP In-
Indexing purposes only and has no relation to dexing purposes only and has no relation to any
any protocol vaalue." protocol value."
::= { rsvpFlowEntry 1 } ::= { rsvpFlowEntry 1 }
rsvpFlowType OBJECT-TYPE rsvpFlowType OBJECT-TYPE
SYNTAX SessionType SYNTAX SessionType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow "The type of session (IP4, IP6, IP6 with flow
information, etc), and therefore the structure information, etc)."
of the information."
::= { rsvpFlowEntry 2 } ::= { rsvpFlowEntry 2 }
rsvpFlowDestAddr OBJECT-TYPE rsvpFlowDestAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Address used as a destination address by "The destination address used by all senders in
all senders in this session." this session."
::= { rsvpFlowEntry 3 } ::= { rsvpFlowEntry 3 }
rsvpFlowSenderAddr OBJECT-TYPE rsvpFlowSenderAddr OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Address used as a source address by this "The source address of the sender selected by
sender in this session." this reservation. The value of all zeroes in-
dicates 'all senders'."
::= { rsvpFlowEntry 4 } ::= { rsvpFlowEntry 4 }
rsvpFlowProtocol OBJECT-TYPE rsvpFlowProtocol OBJECT-TYPE
SYNTAX Protocol SYNTAX Protocol
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP Protocol used by a session. for secure "The IP Protocol used by a session."
sessions, this indicates IP Security."
::= { rsvpFlowEntry 5 } ::= { rsvpFlowEntry 5 }
rsvpFlowDestPort OBJECT-TYPE rsvpFlowDestPort OBJECT-TYPE
SYNTAX Port SYNTAX Port
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The UDP or TCP port number used as a destina- "The UDP or TCP port number used as a destina-
tion port for all senders in this session. A tion port for all senders in this session. If
value of zero indicates that the IP protocol in the IP protocol in use, specified by
use, specified by rsvpSessionProtocol, does not rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH),
have ports." this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports."
::= { rsvpFlowEntry 6 } ::= { rsvpFlowEntry 6 }
rsvpFlowPort OBJECT-TYPE rsvpFlowPort OBJECT-TYPE
SYNTAX Port SYNTAX Port
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The UDP or TCP port number used as a source "The UDP or TCP port number used as a source
port for this sender in this session. A value port for this sender in this session. If the
of zero indicates that the IP protocol in use, IP protocol in use, specified by
specified by rsvpSessionProtocol, does not have rsvpResvFwdProtocol is 50 (ESP) or 51 (AH),
ports." this represents a generalized port identifier
(GPI). A value of zero indicates that the IP
protocol in use does not have ports."
::= { rsvpFlowEntry 7 } ::= { rsvpFlowEntry 7 }
rsvpFlowInterface OBJECT-TYPE rsvpFlowInterface OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ifIndex value of the interface on which "The ifIndex value of the interface on which
this PATH message was most recently received." this reservation exists."
::= { rsvpFlowEntry 8 } ::= { rsvpFlowEntry 8 }
rsvpFlowRate OBJECT-TYPE rsvpFlowRate OBJECT-TYPE
SYNTAX BitRate SYNTAX BitRate
UNITS "kilobits per second" UNITS "bits per second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Average Bit Rate of the sender's data "The Reserved Rate of the sender's data stream.
stream, in Kilobits. The rate may be arbi- If this is a Controlled Load service flow, this
trarily fast during a short interval such as rate is derived from the Tspec rate parameter
the duration of a video frame. However, over (r). If this is a Guaranteed service flow,
any two such intervals it will not average fas- this rate is derived from the Rspec clearing
ter than the average rate as transmitted by the rate parameter (R)."
sender."
::= { rsvpFlowEntry 9 } ::= { rsvpFlowEntry 9 }
rsvpFlowBurst OBJECT-TYPE rsvpFlowBurst OBJECT-TYPE
SYNTAX BurstSize SYNTAX BurstSize
UNITS "bits" UNITS "bytes"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The size of the largest burst expected from "The size of the largest burst expected from
the sender at a time. the sender at a time.
If this is less than the sender's advertised If this is less than the sender's advertised
burst size, the receiver is asking the network burst size, the receiver is asking the network
to provide flow pacing beyond what would be to provide flow pacing beyond what would be
provided under normal circumstances. Such pac- provided under normal circumstances. Such pac-
skipping to change at page 47, line 13 skipping to change at page 61, line 13
::= { rsvpIfEntry 4 } ::= { rsvpIfEntry 4 }
rsvpIfRefreshMultiple OBJECT-TYPE rsvpIfRefreshMultiple OBJECT-TYPE
SYNTAX INTEGER (1..65536) SYNTAX INTEGER (1..65536)
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of the RSVP value 'K', which is the "The value of the RSVP value 'K', which is the
number of refresh intervals which must elapse number of refresh intervals which must elapse
(minimum) before a PATH or RESV message which (minimum) before a PATH or RESV message which
is not being refreshed will be aged out." is not being refreshed will be aged out."
DEFVAL { 4 } DEFVAL { 3 }
::= { rsvpIfEntry 5 } ::= { rsvpIfEntry 5 }
rsvpIfTTL OBJECT-TYPE rsvpIfTTL OBJECT-TYPE
SYNTAX INTEGER (0..255) SYNTAX INTEGER (0..255)
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of SEND_TTL used on this interface. "The value of SEND_TTL used on this interface
If set to zero, then the TTL in RSVP messages for messages this node originates. If set to
is not overridden." zero, the node determines the TTL via other
means."
DEFVAL { 0 } -- which is to say, no override DEFVAL { 0 } -- which is to say, no override
::= { rsvpIfEntry 6 } ::= { rsvpIfEntry 6 }
rsvpIfRefreshInterval OBJECT-TYPE rsvpIfRefreshInterval OBJECT-TYPE
SYNTAX TimeInterval SYNTAX TimeInterval
UNITS "hundredths of a second" UNITS "hundredths of a second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of the RSVP value 'R', which is the "The value of the RSVP value 'R', which is the
skipping to change at page 48, line 11 skipping to change at page 62, line 11
a given PATH or RESV message on an interface." a given PATH or RESV message on an interface."
DEFVAL { 3000 } -- 30 seconds DEFVAL { 3000 } -- 30 seconds
::= { rsvpIfEntry 7 } ::= { rsvpIfEntry 7 }
rsvpIfRouteDelay OBJECT-TYPE rsvpIfRouteDelay OBJECT-TYPE
SYNTAX TimeInterval SYNTAX TimeInterval
UNITS "hundredths of a second" UNITS "hundredths of a second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The approximate period from the time a route "The approximate period from the time a route
is changed to the time that a route is changed is changed to the time a resulting message ap-
to the time a resulting message appears on the pears on the interface."
interface."
DEFVAL { 200 } -- 2 seconds DEFVAL { 200 } -- 2 seconds
::= { rsvpIfEntry 8 } ::= { rsvpIfEntry 8 }
rsvpIfEnabled OBJECT-TYPE rsvpIfEnabled OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If TRUE, RSVP is enabled on this Interface. "If TRUE, RSVP is enabled on this Interface.
If FALSE, RSVP is not enabled on this inter- If FALSE, RSVP is not enabled on this inter-
skipping to change at page 54, line 8 skipping to change at page 68, line 8
rsvpSessionReceivers, rsvpSessionRequests rsvpSessionReceivers, rsvpSessionRequests
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for RSVP Systems." "These objects are required for RSVP Systems."
::= { rsvpGroups 1 } ::= { rsvpGroups 1 }
rsvpSenderGroup OBJECT-GROUP rsvpSenderGroup OBJECT-GROUP
OBJECTS { OBJECTS {
rsvpSenderType, rsvpSenderDestAddr, rsvpSenderSenderAddr, rsvpSenderType, rsvpSenderDestAddr, rsvpSenderSenderAddr,
rsvpSenderProtocol, rsvpSenderDestPort, rsvpSenderPort, rsvpSenderProtocol, rsvpSenderDestPort, rsvpSenderPort,
rsvpSenderHopAddr, rsvpSenderInterface, rsvpSenderTSpecRate, rsvpSenderHopAddr, rsvpSenderHopLih,
rsvpSenderInterface, rsvpSenderTSpecRate,
rsvpSenderTSpecPeakRate, rsvpSenderTSpecBurst, rsvpSenderTSpecPeakRate, rsvpSenderTSpecBurst,
rsvpSenderTSpecMinTU, rsvpSenderTSpecMaxTU, rsvpSenderInterval, rsvpSenderTSpecMinTU, rsvpSenderTSpecMaxTU,
rsvpSenderLastChange, rsvpSenderStatus, rsvpSenderRSVPHop, rsvpSenderInterval, rsvpSenderLastChange,
rsvpSenderPolicy, rsvpSenderAdspec, rsvpSenderNewIndex rsvpSenderStatus, rsvpSenderRSVPHop, rsvpSenderPolicy,
rsvpSenderAdspecBreak, rsvpSenderAdspecHopCount,
rsvpSenderAdspecPathBw, rsvpSenderAdspecMinLatency,
rsvpSenderAdspecMtu, rsvpSenderAdspecGuaranteedSvc,
rsvpSenderAdspecGuaranteedBreak,
rsvpSenderAdspecGuaranteedCtot,
rsvpSenderAdspecGuaranteedDtot,
rsvpSenderAdspecGuaranteedCsum,
rsvpSenderAdspecGuaranteedDsum,
rsvpSenderAdspecGuaranteedHopCount,
rsvpSenderAdspecGuaranteedPathBw,
rsvpSenderAdspecGuaranteedMinLatency,
rsvpSenderAdspecGuaranteedMtu, rsvpSenderAdspecCtrlLoadSvc,
rsvpSenderAdspecCtrlLoadBreak,
rsvpSenderAdspecCtrlLoadHopCount,
rsvpSenderAdspecCtrlLoadPathBw,
rsvpSenderAdspecCtrlLoadMinLatency,
rsvpSenderAdspecCtrlLoadMtu, rsvpSenderNewIndex
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for RSVP Systems." "These objects are required for RSVP Systems."
::= { rsvpGroups 2 } ::= { rsvpGroups 2 }
rsvpResvGroup OBJECT-GROUP rsvpResvGroup OBJECT-GROUP
OBJECTS { OBJECTS {
rsvpResvType, rsvpResvDestAddr, rsvpResvSenderAddr, rsvpResvType, rsvpResvDestAddr, rsvpResvSenderAddr,
rsvpResvProtocol, rsvpResvDestPort, rsvpResvPort, rsvpResvProtocol, rsvpResvDestPort, rsvpResvPort,
rsvpResvHopAddr, rsvpResvInterface, rsvpResvService, rsvpResvHopAddr, rsvpResvHopLih,
rsvpResvInterface, rsvpResvService,
rsvpResvTSpecRate, rsvpResvTSpecBurst, rsvpResvTSpecPeakRate, rsvpResvTSpecRate, rsvpResvTSpecBurst, rsvpResvTSpecPeakRate,
rsvpResvTSpecMinTU, rsvpResvTSpecMaxTU, rsvpResvTSpecLevel, rsvpResvTSpecMinTU, rsvpResvTSpecMaxTU, rsvpResvRSpecRate,
rsvpResvRSpecSlack,
rsvpResvInterval, rsvpResvScope, rsvpResvShared, rsvpResvInterval, rsvpResvScope, rsvpResvShared,
rsvpResvExplicit, rsvpResvRSVPHop, rsvpResvLastChange, rsvpResvExplicit, rsvpResvRSVPHop, rsvpResvLastChange,
rsvpResvPolicy, rsvpResvStatus, rsvpResvNewIndex rsvpResvPolicy, rsvpResvStatus, rsvpResvNewIndex
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for RSVP Systems." "These objects are required for RSVP Systems."
::= { rsvpGroups 3 } ::= { rsvpGroups 3 }
rsvpResvFwdGroup OBJECT-GROUP rsvpResvFwdGroup OBJECT-GROUP
OBJECTS { OBJECTS {
rsvpResvFwdType, rsvpResvFwdDestAddr, rsvpResvFwdSenderAddr, rsvpResvFwdType, rsvpResvFwdDestAddr, rsvpResvFwdSenderAddr,
rsvpResvFwdProtocol, rsvpResvFwdDestPort, rsvpResvFwdPort, rsvpResvFwdProtocol, rsvpResvFwdDestPort, rsvpResvFwdPort,
rsvpResvFwdHopAddr, rsvpResvFwdHopLih,
rsvpResvFwdInterface, rsvpResvFwdNewIndex, rsvpResvFwdService, rsvpResvFwdInterface, rsvpResvFwdNewIndex, rsvpResvFwdService,
rsvpResvFwdTSpecPeakRate, rsvpResvFwdTSpecMinTU, rsvpResvFwdTSpecPeakRate, rsvpResvFwdTSpecMinTU,
rsvpResvFwdTSpecMaxTU, rsvpResvFwdTSpecRate, rsvpResvFwdTSpecMaxTU, rsvpResvFwdTSpecRate,
rsvpResvFwdTSpecBurst, rsvpResvFwdTSpecLevel, rsvpResvFwdTSpecBurst, rsvpResvFwdRSpecRate,
rsvpResvFwdRSpecSlack,
rsvpResvFwdInterval, rsvpResvFwdScope, rsvpResvFwdShared, rsvpResvFwdInterval, rsvpResvFwdScope, rsvpResvFwdShared,
rsvpResvFwdExplicit, rsvpResvFwdRSVPHop, rsvpResvFwdLastChange, rsvpResvFwdExplicit, rsvpResvFwdRSVPHop,
rsvpResvFwdLastChange,
rsvpResvFwdPolicy, rsvpResvFwdStatus rsvpResvFwdPolicy, rsvpResvFwdStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for RSVP Systems." "These objects are required for RSVP Systems."
::= { rsvpGroups 4 } ::= { rsvpGroups 4 }
rsvpFlowGroup OBJECT-GROUP rsvpFlowGroup OBJECT-GROUP
OBJECTS { OBJECTS {
rsvpFlowType, rsvpFlowDestAddr, rsvpFlowSenderAddr, rsvpFlowType, rsvpFlowDestAddr, rsvpFlowSenderAddr,
rsvpFlowProtocol, rsvpFlowDestPort, rsvpFlowPort, rsvpFlowProtocol, rsvpFlowDestPort, rsvpFlowPort,
rsvpFlowInterface, rsvpFlowDontAsk, rsvpFlowRate, rsvpFlowInterface, rsvpFlowDontAsk, rsvpFlowRate,
rsvpFlowBurst, rsvpFlowWeight, rsvpFlowQueue, rsvpFlowMinTU, rsvpFlowBurst, rsvpFlowWeight, rsvpFlowQueue, rsvpFlowMinTU,
rsvpFlowStatus rsvpFlowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 59, line 17 skipping to change at page 73, line 17
1 Status of this Memo ................................... 1 1 Status of this Memo ................................... 1
2 Abstract .............................................. 2 2 Abstract .............................................. 2
3 The SNMPv2 Network Management Framework ............... 3 3 The SNMPv2 Network Management Framework ............... 3
3.1 Object Definitions .................................. 3 3.1 Object Definitions .................................. 3
4 Overview .............................................. 3 4 Overview .............................................. 3
4.1 Textual Conventions ................................. 3 4.1 Textual Conventions ................................. 3
4.2 Structure of MIB .................................... 4 4.2 Structure of MIB .................................... 4
5 Definitions ........................................... 5 5 Definitions ........................................... 5
5.1 RSVP Session Statistics Database .................... 8 5.1 RSVP Session Statistics Database .................... 8
5.1 RSVP Session Sender Database ........................ 12 5.1 RSVP Session Sender Database ........................ 12
5.2 RSVP Reservations Requested Database ................ 20 5.2 RSVP Reservations Requested Database ................ 30
5.3 RSVP Reservation Requests Database .................. 29 5.3 RSVP Reservation Requests Database .................. 41
5.3 RSVP Interface Flows Database ....................... 38 5.3 RSVP Interface Flows Database ....................... 52
5.4 RSVP Interface Attributes Database .................. 44 5.4 RSVP Interface Attributes Database .................. 58
5.5 RSVP Neighbor Database .............................. 49 5.5 RSVP Neighbor Database .............................. 63
5.4 Notifications ....................................... 51 5.4 Notifications ....................................... 65
6 Acknowledgements ...................................... 57 6 Acknowledgements ...................................... 71
7 References ............................................ 58 7 References ............................................ 72
 End of changes. 

This html diff was produced by rfcdiff 1.25, available from http://www.levkowetz.com/ietf/tools/rfcdiff/