draft-ietf-roll-home-routing-reqs-05.txt   draft-ietf-roll-home-routing-reqs-06.txt 
Networking Working Group A. Brandt Networking Working Group A. Brandt
Internet Draft Zensys, Inc. Internet Draft Zensys, Inc.
Intended status: Informational G. Porcu Intended status: Informational G. Porcu
Expires: May 2009 Telecom Italia Expires: May 2009 Telecom Italia
November 19, 2008 November 19, 2008
Home Automation Routing Requirements in Low Power and Lossy Home Automation Routing Requirements in Low Power and Lossy
Networks Networks
draft-ietf-roll-home-routing-reqs-05 draft-ietf-roll-home-routing-reqs-06
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that By submitting this Internet-Draft, each author represents that
any applicable patent or other IPR claims of which he or she is any applicable patent or other IPR claims of which he or she is
aware have been or will be disclosed, and any of which he or she aware have been or will be disclosed, and any of which he or she
becomes aware will be disclosed, in accordance with Section 6 of becomes aware will be disclosed, in accordance with Section 6 of
BCP 79. BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
skipping to change at page 4, line 51 skipping to change at page 4, line 51
event. event.
The sensor may generate a trap message to notify a The sensor may generate a trap message to notify a
controller or directly activate an actuator. controller or directly activate an actuator.
If sufficiently powered, sensor nodes may If sufficiently powered, sensor nodes may
participate in routing network messages. participate in routing network messages.
Upstream: Data direction traveling from a PAN to a LAN Upstream: Data direction traveling from a PAN to a LAN
device. device.
Refer to the roll-terminology reference document for a full list Refer to the roll-terminology reference document for a full list
of terms used in the IETF ROLL WG. of terms used in the IETF ROLL WG (I-D.draft-ietf-roll-terminology).
1. Introduction 1. Introduction
This document presents home control and automation application This document presents home control and automation application
specific requirements for Routing Over Low power and Lossy specific requirements for Routing Over Low power and Lossy
networks (ROLL). In a modern home, a high number of wireless networks (ROLL). In a modern home, a high number of wireless
devices are used for a wide set of purposes. Examples include devices are used for a wide set of purposes. Examples include
actuators (relay, light dimmer, heating valve), sensors (wall actuators (relay, light dimmer, heating valve), sensors (wall
switch, water leak, blood pressure) and advanced controllers. switch, water leak, blood pressure) and advanced controllers.
Basic home control modules such as wall switches and plug-in Basic home control modules such as wall switches and plug-in
skipping to change at page 16, line 7 skipping to change at page 16, line 7
When promoted to an RFC, the references MUST be updated to RFCs as When promoted to an RFC, the references MUST be updated to RFCs as
well or removed from the references section. well or removed from the references section.
9.1. Normative References 9.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997. Requirement Levels", BCP 14, RFC 2119, March 1997.
9.2. Informative References 9.2. Informative References
[I-D.draft-ietf-roll-indus-routing-reqs] [I-D.draft-ietf-roll-terminology]
"Industrial Routing Requirements in Low Power and Lossy
Networks", Kris Pister, Pascal Thubert, Sicco Dwars,
Tom Phinney, draft-ietf-roll-indus-routing-reqs-02
(work in progress), October 2008
[I-D.draft-ietf-roll-urban-routing-reqs]
"Urban WSNs Routing Requirements in Low Power and Lossy
Networks", Mischa Dohler, Thomas Watteyne, Tim Winter,
Dominique Barthel, Christian Jacquenet,
Giyyarpuram Madhusudan, Gabriel Chegaray,
draft-ietf-roll-urban-routing-reqs-02 (work in progress)
October 2008
[I-D.draft-martocci-roll-building-routing-reqs]
"Building Automation Routing Requirements in Low Power
and Lossy Networks", Jerry Martocci, Nicolas Riou,
Pieter Mil, Wouter Vermeylen,
draft-martocci-roll-building-routing-reqs-01
(work in progress), October 2008
[I-D.draft-martocci-roll-commercial-routing-reqs]
"Commercial Routing Requirements in Low Power and
Lossy Networks", Jerry Martocci, Ted Humpal, Nicolas Riou,
Jon Williamsson,
draft-martocci-roll-commercial-routing-reqs-00.txt
[I-D.draft-vasseur-roll-terminology]
"Terminology in Low power And Lossy Networks", "Terminology in Low power And Lossy Networks",
JP Vasseur, draft-ietf-roll-terminology-00 JP Vasseur, draft-ietf-roll-terminology-00
(work in progress), October 2008 (work in progress), October 2008
Author's Addresses Author's Addresses
Anders Brandt Anders Brandt
Zensys, Inc. Zensys, Inc.
Emdrupvej 26 Emdrupvej 26
Copenhagen, DK-2100 Copenhagen, DK-2100
 End of changes. 3 change blocks. 
29 lines changed or deleted 3 lines changed or added

This html diff was produced by rfcdiff 1.35. The latest version is available from http://tools.ietf.org/tools/rfcdiff/