Network Working Group B. Decraene Internet Draft J.L. Le Roux Document:
draft-ietf-mpls-ldp-interarea-03.txtdraft-ietf-mpls-ldp-interarea-04.txt France Telecom Intended status: Standards Track Expiration Date: AugustDecember 2008 I. Minei Juniper Networks, Inc. February 2008LDP extension for Inter-Area LSP Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. Abstract To facilitate the establishment of Label Switched Paths (LSP) that would span multiple IGP areas in a given Autonomous System (AS), this document proposesdescribes a new optional label mapping procedureLongest Match Label Mapping Procedure for the Label Distribution Protocol (LDP). This procedure allows the use of a label if the Forwarding Equivalence Class (FEC) Element matches an entry in the routing table (RIB). Matching is defined by an IP longest match search and does not mandate an exact match. Table of Contents 1. Conventions used in this document...........................2 2. Terminology.................................................2 3. Introduction................................................2 4. Problem statement...........................................3 5. Longest Match Label Mapping Procedure.....................................4Message Procedure...............4 6. Application examples........................................5examples........................................6 6.1. Inter-area LSPs.............................................5LSPs.............................................6 6.2. Use of static routes........................................7 7. Caveats for deployment......................................7deployment......................................8 7.1. Deployment consideration....................................7considerations...................................8 7.2. Impact on routingRouting convergence time..........................8time considerations.....................8 8. Security Considerations.....................................8Considerations.....................................9 9. IANA Considerations.........................................8Considerations.........................................9 10. References..................................................9 10.1. Normative References........................................9 10.2. Informative References......................................9 11. Acknowledgments.............................................9Acknowledgments............................................10 12. Author's Addresses.........................................10Authors' Addresses.........................................11 1. Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.[RFC 2119]. 2. Terminology IGP Area: OSPF Area or IS-IS level ABR: OSPF Area Border Router or IS-IS L1/L2 router LSP: Label Switched Path Intra-area LSP: LSP that does not traverse any IGP area boundary. Inter-area LSP: LSP that traverses at least one IGP area boundary. 3. Introduction Link state IGPsInterior Gateway Protocols (IGPs) such as OSPF [OSPFv2] and IS-IS [IS-IS] allow the partition of an autonomous system into areas or levels so as to increase routing scalability within a routing domain. However, [LDP] requiresrecommends that the IP address of the FEC Element should *exactly* match an entry in the IP RIB: according to [LDP] section 18.104.22.168 (Label Mapping Messages Procedures) "An LSR"A Label Switching Router (LSR) receiving a Label Mapping message from a downstream LSR for a Prefix SHOULD NOT use the label for forwarding unless its routing table contains an entry that exactly matches the FEC Element.". Therefore, MPLS LSPs between LERsLabel Edge Routers (LERs) in different areas/levels are not setup unless the specific (e.g. /32 for IPv4) loopback addresses of all the LERs are redistributed across all areas. The problem statement is discussed in section 4. Then, in section 5 we extend the Label Mapping Procedure defined in [LDP] so as to support the setup of contiguous inter-area LSPs while maintaining IP prefix aggregation on the ABRs. This basicallyconsists of allowing for "Longest Match Based"longest match based Label Mapping. 4. Problem statement Provider based MPLS VPN(Multi Protocol Label Switching) networks are expanding with the success of Layer 3 VPN ([L3-VPN])(Virtual Private Networks [L3-VPN]) and the new deployments of layer 2 VPNs ([VPLS-BGP], [VPLS-LDP]).[VPLS- LDP]). Service Providerproviders MPLS backbones are significantly growing both in terms of density with the addition of PEsProvider Edge (PE) routers to connect new customers and in terms of footprint as traditional layer two aggregation networks may be replaced by IP/MPLS networks. As a consequence many providers need to introduce IGP areas. Inter- area LSPs, that is LSPs that traverse at least two IGP areas, are required to ensure MPLS connectivity between PEs located in distinct IGP areas. To set up the required MPLS LSPs between PEs in different IGP areas, servicesservice providers have currently three solutions: 1) LDP with IGP route leaking, 2) BGP [MPLS-BGP] over LDP with MPLS hierarchy, or also inter- areaand 3) inter-area RSVP-TE [ID-RSVP-TE].(Resource Reservation Protocol-Traffic Engineering [RSVP-TE]). IGP route leaking consists in redistributing all specific PE loopback addresses across area boundaries. As a result, LDP finds in the RIBRouting Information Base (RIB) an exact match for its FEC and sets up the LSP. As a consequence, the potential benefits that a multi-area domain may yield are significantly diminished since a lot of addresses have to be redistributed by ABRs, and the number of IP entries in the LSDB andIGP Link State DataBase (LSDB), RIB and FIB maintained by every LSR of the domain (whatever the area/level it belongs to) cannot be minimized. Service providers may also set up these inter-area LSPs by using MPLS hierarchy with BGP [MPLS-BGP] as a label distribution protocol between areas. The BGP next hop would typically be the ABRs and the BGP-created LSPs would be nested within intra-area LSPs setup by LDP between PEs and ABRs and between ABRs. This solution is not adequate for Service Providersservice providers which don't want to run BGP on their P routers as it requires BGP on all ABRs. In addition, MPLS hierarchy does not allow locally protecting the LSP against ABR failures (IP / LDP(IP/LDP Fast Reroute), and hence ensuring sub- 50ms recovery upon ABR failure. The resulting convergence time may not be acceptable for stringent SLAsService Level Agreements (SLAs) required for voice or mission critical applications. Finally, this solution requires a significant migration effort for Service Providersservice providers which started with LDP and IGP route leaking to quickly set-up the fistfirst inter-area LSPs. Service providers may also setup these inter-area LSPs by using inter-area RSVP-TE [ID-RSVP-TE].[RSVP-TE]. This is a relevant solution when RSVP-TERSVP- TE is already used for setting up intra-area LSPs, and inter- areainter-area traffic engineering features are required. In return this is not a desired solution when LDP is already used for setting up intra-area LSPs, and inter-area traffic engineering features are not required. To avoid the above drawbacks, there is a need for an LDP based solution which allows setting up contiguous inter-area LSPs while avoiding leaking of specific PE loopback addresses across area boundaries, and hence keeping all the benefits of IGP hierarchy. In that context, this document defines a new LDP Label Mapping Procedure so as to support the setup of contiguous inter-area LSPs while maintaining IP prefix aggregation on the ABRs. This procedure is similar to the one defined in [LDP] but performs aan IP longest match when searching the FEC element in the RIB. 5. Longest Match Label Mapping Message Procedure This document defines a new label mapping procedureLabel Mapping Procedure for [LDP]. It is applicable to IPv4 and IPv6 prefix FEC elements (addresses(address families 1 and 2 as per [ASSIGNED_AF]). It MUSTSHOULD be possible to activate / deactivate this procedure by configuration and it SHOULD be deactivated by default. It MAY be possible to activate it on a per prefix basis. With this new longest match label mapping procedure, aLongest Match Label Mapping Procedure, an LSR receiving a Label Mapping message from a neighbor LSR for a Prefix Address FEC Element (FEC1)FEC1 SHOULD use the label for MPLS forwarding if its routing table contains an entry that matches the FEC Element FEC1 and the advertising LSR is a next hop to reach the FEC.FEC1. If so, it SHOULD advertise the received FEC Element (FEC1)FEC1 and a label to its LDP peers. Note that this is the specific FEC (FEC1) that LDP re-advertise to its peers, and not the aggregated prefix found in the IP RIB during the longest match search.By "matching FEC Element", one should understand an IP longest match. That is, either the LDP FEC element exactly matches an entry in the IP RIB or the FEC element is a subset of an IP RIB entry. There is no match for other cases such as the FEC element is a superset of a RIB entry. Note that with thisLDP re-advertises to its peers the specific FEC element FEC1, and not the aggregated prefix found in the IP RIB during the longest match search. Note that with this Longest Match Label Mapping Procedure, each LSP established by LDP still strictly follows the shortest path(s) defined by the IGP. FECs selected by this "Longest Match" label mapping procedureLongest Match Label Mapping Procedure are distributed in an ordered way. In case of LER failure, the removal of reachability to the FEC occurs using standardLDP procedures asordered label distribution mode procedures. As defined in [LDP]. Similarly,[LDP] in section A.1.5, the FEC will be removed in an ordered way through the propagation of label withdrawLabel Withdraw messages. The use of this (un)reachability information by application layers using thethis MPLS LSP (e.g., BGP)[MP-BGP]) is outside the scope of this document. As per [LDP], LDP has already some interactions with the RIB. In particular, it needs to be aware of the following events: - prefix UPup when a new IP prefix appears in the RIBRIB, - prefix DOWNdown when an existing IP prefix disappearsdisappears, - next-hopnext hop change when an existing IP prefix havehas a new next hop following a routing change. With this longest match procedure,Longest Match Label Mapping Message Procedure, multiple FECs may be concerned by a single RIB prefix change. The LSR mustMUST check all the FECs which are a subset of this RIB prefix. So some LDP reactions following a RIB event are changed: - When a new prefix appears in the RIB, the LSR MUST check if this prefix is a better match for some existing FECs. E.g. the FEC elements 192.0.2.1/32 and 192.0.2.2/32 used the IP RIB entry 192.0.0/16192.0.2.0/24 and a new more specific IP RIB entry 192.0.2/24192.0.2.0/26 appears. This may result in changing the LSR used as next hop and hence the NHLFENext Hop Label Forwarding Entry (NHLFE) for this FEC. - When a prefix disappears in the RIB, the LSR MUST check all FEC elements which are using this RIB prefix as best match. For each FEC, if another RIB prefix is found as best match, LDP MUST use it. This may result in changing the LSR used as next hop and hence the NHLFE for this FEC. Otherwise, the LSR MUST remove the FEC binding and send a label withdrawLabel Withdraw message. - When the next-hopnext hop of a RIB prefix change,changes, the LSR mustMUST change the NHLFE of all the FEC elements using this prefix. Future work may define new management objects to the MPLS LDP MIB modules [LDP-MIB] to activate/deactivate this Longest Match Label Mapping Message Procedure, possibly on a per prefix basis. 6. Application examples 6.1. Inter-area LSPs Consider the following example of an autonomous system with one backbone area and two edge areas: Area "B" Level 2 / Backbone area +--------------------------+ Area "A" | | Area "C" | | Level 1 | | Level 1 / area | P1 | +----------+ +-------------+ | | P2 | PE1 | 192.0.2.1/32 | | | | |PE4 ABR2 ABR1 PE2 | 192.0.2.2/32 | | P3 | | | | | PE3 | 192.0.2.3/32 +----------+ +-------------+ | | +--------------------------+ Figure 1: An IGP domain with two areas attached to the Backbone Area. Note that this applies equally to IS-IS and OSPF. An ABR refers here either to an OSPF ABR or to an IS-IS L1/L2 node. All routers are MPLS enabled and MPLS connectivity (i.e. an LSP) is required between all PE routers. In the "egress" area "C", the records available are: IGP RIB LDP FEC elements: 192.0.2.1/32 192.0.2.1/32 192.0.2.2/32 192.0.2.2/32 192.0.2.3/32 192.0.2.3/32 The area border router ABR1 advertises in the backbone area: - the aggregated IP prefix 192.0.2/24192.0.2.0/26 in the IGP - all the specific IP FEC elements (/32) in LDP In the "backbone" area "B", the records available are: IGP RIB LDP FEC elements: 192.0.2/24192.0.2.0/26 192.0.2.1/32 192.0.2.2/32 192.0.2.3/32 The area border router ABR2 advertises in the area "A": - an aggregated IP prefix 192.0/16192.0.2.0/24 in the IGP - all the individual IP FEC elements (/32) in LDP In the "ingress" area "A", the records available are: IGP RIB LDP FEC elements: 192.0/16192.0.2.0/24 192.0.2.1/32 192.0.2.2/32 192.0.2.3/32 In this situation, one LSP is established between the ingress PE4 and every egress PE of area C while maintaining IP prefix aggregation on the ASBRs. 6.2. Use of static routes Consider the following example where a LER is dual-connected to two LSRs: +--------LSR1---- | | LER | | | +--------LSR2---- Figure 2: LER dual-connected to two LSRs. In some situations, especially on the edge of the network, it is valid to use static IP routes between the LER and the two LSRs. If necessary, the BFD protocol ([BFD]) can be used to quickly detect loss of connectivity. The LDP specification defined in [LDP] would require on the ingress LER the configuration and the maintenance of one IP route per egress LER and per outgoing interface. The longest matchLongest Match Label Mapping Procedure described in this document only requires one IP route per outgoing interface. 7. Caveats for deployment 7.1. Deployment considerations LSRs compliant with this document are backward compatible with LSRs that comply with [LDP]. For the successful establishment of end-to-end MPLS LSPs whose FEC are aggregated in the RIB, this specification must be implemented on all LSRs in all areas where IP aggregation is used. If an LSR on the path does not support this procedure, then the LSP initiated on the egress LSR stops at this non compliant LSR. There are no other adverse effects. A service provider currently leakingThis extension can be deployed incrementally: - It can be deployed on a per area or routing domain basis and does not necessarily require an AS wide deployment. For example, if all specific LER's loopback addressesIP prefixes are leaked in the IGP and now considering performing IP aggregation on ABR should be aware that this may result in suboptimal routing as discussed in [RFC 2966]. This extension does not necessarily require an AS wide deployment but can be used on a per area basis. For example, if all specific IP prefixes are leaked in the IGP backbone areabackbone area and only stub areas use IP aggregation, LSRs in the backbone area don't need to be compliant with this document. 7.2. Impact- Within each routing area, LSRs can be upgraded independently, at any time, in any order and without service disruption. During deployment, if those LSPs are already used, one should only make sure that ABRs keep advertising the specific IP prefixes in the IGP until all LSR of this area are successfully upgraded. Then, the ABRs can advertise the aggregated prefix only and stop advertising the specific ones. A service provider currently leaking specific LER's loopback addresses in the IGP and now considering performing IP aggregation on ABR should be aware that this may result in suboptimal routing as discussed in [RFC 2966]. 7.2. Routing convergence time IGP convergenceconsiderations IP and MPLS traffic restoration time is based on two factors: the SPFShortest Path First (SPF) calculation in the control plane and FIB/LFIBForwarding Information Base (FIB)/Label FIB (LFIB) update time.time in the forwarding plane. The SPF calculation scales O(N*Log(N)) where N is the number of Nodes. The FIB/LFIB update scales O(P) where P is the number of modified prefixes. Currently, with most routers implementations, the FIB/LFIB update is the dominant component . and therefore the bottleneck that should be addressed in priority. The solution documented in this draft reduces the link state database size in the control plane and the number of FIB entries.entries in the forwarding plane. As such it solves the scaling of pure IP routers sharing the IGP with MPLS routers. However, it does not decrease the number of LFIB entries. In caseentries so is not sufficient to solve the scaling of failureMPLS routers. For this, an additional mechanism is required (e.g. introducing some MPLS hierarchy in LDP). This is out of scope of this document. Compared to [LDP], for all failures except LER failure (i.e. links, Ps and ABRs nodes), the egressfailure notification and the convergence is unchanged. For LER node,failure, given that the IGP aggregates IP routeroutes on ABRs,ABRs and no longer advertise specific prefixes, the control plane and more specifically the routing convergence behavior is changed compared to [LDP]. As the IGP does not carry specifics prefixes outsideof the egress area, the IGP will not propagate the notificationprotocols (e.g. [MP-BGP]) or applications (e.g. [L3-VPN]) may be changed in case of nodefailure outsideof the area. So application layers usingegress LER node. For protocols and applications which need to track egress LER availability, several solutions can be used, for example: - Rely on the LSP may,LDP ordered label distribution control mode - as a local decision, usedefined in [LDP] - to know the availability of the MPLSLSP -as advertised by LDP- to achieve LERtoward the egress LER. The egress fault notification in additionto application layer fault detection mechanisms. For some applications (e.g. BGP) thisingress propagation time of that unreachability information is expected to be faster. LDP will withdraw the FEC(s) of the egress LER in an ordered way through the end-to-end propagation of the LDP withdraw message. Comparedcomparable to the IGP,IGP (but this LDP failure notificationmay be faster or slower depending on the implementations,implementation dependant). - Advertise LER reachability in the IGP timers used and the network topology (network diameter). In typical topologies, the convergence time is expected to be similar or even faster since there is no need to waitfor three consecutive SPF/PRC timers. For all others failures (links, Ps and ABRs nodes),the failure notification andpurpose of the convergence are unchanged.control plane in a way that do not create IP FIB entries in the forwarding plane. 8. Security Considerations The longest matchLongest Match Label Mapping procedure described in this document does not introduce any change as far as the Security Consideration section of [LDP] is concerned. 9. IANA Considerations This document has no actions for IANA. 10. References 10.1. Normative References [LDP] L.Andersson, I.L., Minei, B.I., Thomas, B., "LDP Specification", RFC 5036, October 2007 [ASSIGNED_AF] http://www.iana.org/assignments/address-family- numbers [RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate 10.2. Informative References [L3-VPN] Rosen, E., Rekhter, Y. ," BGP/MPLS IP Virtual Private Networks (VPNs) ", RFC 4374, February 2006 [MP-BGP] Bates, T., Chandra, R., Katz, D., Rekhter, Y., "Multiprotocol Extensions for BGP-4", RFC 4760, January 2007 [MPLS-BGP] Rekhter, Y., Rosen, E., "Carrying Label Information in [IS-IS] Callon, R., "Use of OSI IS-IS for Routing in TCP/IP and Dual Environments", RFC 1195, December 1990 [VPLS-BGP] Kompella, K., Rekhter, Y., "Virtual Private LAN Service (VPLS) Using BGP for Auto-discovery and Signaling", RFC 4761, January 2007. [VPLS-LDP] Lasserre, M., Kompella, V., "Virtual Private LAN Service (VPLS) Using Label Distribution Protocol (LDP) Signaling", RFC 4762, January 2007. [RFC 2966] Li, T., Przygienda, T., Smit, H., "Domain-wide Prefix Distribution with Two-Level IS-IS", RFC 2966, October 2000. [ID-RSVP-TE][RSVP-TE] Farrel, Ayyangar, Vasseur, " Inter"Inter domain MPLS and GMPLS Traffic Engineering - RSVP-TE extensions", draft-ietf- ccamp-inter-domain-rsvp-te, work in progress.RFC 5151, February 2008. [LDP-MIB] Cucchiara, J., Sjostrand, H., Luciani, J., "Definitions of Managed Objects for the Multiprotocol Label Switching (MPLS), Label Distribution Protocol (LDP)", RFC 3815, June 2004. [BFD] Katz, D., Ward, D., "Bidirectional Forwarding Detection", draft-ietf-bfd-base-08.txt, March 2008.  Francois, P., Filsfils, C., and Evans, J. 2005. "Achieving sub- second IGP convergence in large IP networks". ACM SIGCOMM 11. Acknowledgments Authors would like to thank Yakov Rekhter, Stefano Previdi, Vach Kompella, Bob Thomas, Clarence Filsfils, Kireeti Kompella, Luca Martini, Sina Mirtorabi, Dave McDysan, Benoit Fondeviole, Gilles Bourdon and Christian Jacquenet for the useful discussions on this subject, their review and comments. 12. Authors' Addresses Bruno Decraene France Telecom 38 rue du General Leclerc 92794 Issy Moulineaux cedex 9 France EMail: firstname.lastname@example.org Jean-Louis Le Roux France Telecom 2, avenue Pierre-Marzin 22307 Lannion Cedex France EMail: email@example.com Ina Minei Juniper Networks 1194 N. Mathilda Ave. Sunnyvale, CA 94089 Email: firstname.lastname@example.org Intellectual Property Considerations The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- email@example.com. Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgment Funding for the RFC Editor function is currently provided by the Internet Society.