draft-ietf-imss-fc-fspf-mib-01.txt   draft-ietf-imss-fc-fspf-mib-02.txt 
Internet Draft C. DeSanti Internet Draft C. DeSanti
V. Gaonkar V. Gaonkar
K. McCloghrie K. McCloghrie
S. Gai
Cisco Systems Cisco Systems
20 October 2005 S. Gai
13 March 2006
MIB for Fibre-Channel's Fabric Shortest Path First Protocol MIB for Fibre-Channel's Fabric Shortest Path First Protocol
draft-ietf-imss-fc-fspf-mib-01.txt draft-ietf-imss-fc-fspf-mib-02.txt
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79. aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
skipping to change at page 2, line 21 skipping to change at page 2, line 21
5 MIB Overview ................................................. 5 5 MIB Overview ................................................. 5
5.1 Fibre Channel management instance .......................... 5 5.1 Fibre Channel management instance .......................... 5
5.2 Switch Index ............................................... 6 5.2 Switch Index ............................................... 6
5.3 Fabric Index ............................................... 6 5.3 Fabric Index ............................................... 6
5.4 The MIB Groups ............................................. 7 5.4 The MIB Groups ............................................. 7
5.4.1 The t11FspfGeneralGroup group ............................ 7 5.4.1 The t11FspfGeneralGroup group ............................ 7
5.4.2 The t11FspfIfGroup group ................................. 7 5.4.2 The t11FspfIfGroup group ................................. 7
5.4.3 The t11FspfDatabaseGroup group ........................... 7 5.4.3 The t11FspfDatabaseGroup group ........................... 7
5.4.4 The t11FspfNotificationGroup group ....................... 7 5.4.4 The t11FspfNotificationGroup group ....................... 7
6 The T11-FC-FSPF-MIB Module ................................... 8 6 The T11-FC-FSPF-MIB Module ................................... 8
7 Intellectual Property ........................................ 35 7 Intellectual Property ........................................ 34
8 Acknowledgements ............................................. 35 8 Acknowledgements ............................................. 34
9 Normative References ......................................... 36 9 Normative References ......................................... 35
10 Informative References ...................................... 37 10 Informative References ...................................... 36
11 IANA Considerations ......................................... 37 11 IANA Considerations ......................................... 36
12 Security Considerations ..................................... 37 12 Security Considerations ..................................... 36
13 Authors' Addresses .......................................... 39 13 Authors' Addresses .......................................... 38
1. Introduction 1. Introduction
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community. for use with network management protocols in the Internet community.
In particular, it describes managed objects for information related In particular, it describes managed objects for information related
to the Fibre Channel network's Fabric Shortest Path First (FSPF) to the Fibre Channel network's Fabric Shortest Path First (FSPF)
routing protocol, which is specified in [FC-SW-4]. routing protocol, which is specified in [FC-SW-4].
2. The Internet-Standard Management Framework 2. The Internet-Standard Management Framework
skipping to change at page 5, line 18 skipping to change at page 5, line 18
down or coming up; down or coming up;
b) On a periodic basis, to prevent switches from deleting topology b) On a periodic basis, to prevent switches from deleting topology
information from the database. information from the database.
Also note that all connections between Fibre Channel switches are Also note that all connections between Fibre Channel switches are
point-to-point. point-to-point.
4. Relationship to Other MIBs 4. Relationship to Other MIBs
The first standardized MIB for Fibre Channel [RFC2837] was focussed The first standardized MIB module for Fibre Channel [RFC2837] was
on Fibre Channel switches. It is being replaced by the more generic focussed on Fibre Channel switches. It is being replaced by the more
Fibre Channel Management MIB [FC-MGMT] which defines basic generic Fibre Channel Management MIB [FC-MGMT] which defines basic
information for Fibre Channel hosts and switches, including information for Fibre Channel hosts and switches, including
extensions to the standard IF-MIB [RFC2863] for Fibre Channel extensions to the standard IF-MIB [RFC2863] for Fibre Channel
interfaces. interfaces.
This MIB extends beyond [FC-MGMT] to cover the operation of the FSPF This MIB module extends beyond [FC-MGMT] to cover the operation of
routing protocol in Fibre Channel switches. the FSPF routing protocol in Fibre Channel switches.
This MIB only contains information specific to FSPF. Information This MIB module only contains information specific to FSPF.
which would still be applicable if any other routing protocol were to Information which would still be applicable if any other routing
be used, is specified in a separate MIB [FC-RTM-MIB]. protocol were to be used, is specified in a separate MIB module [FC-
RTM-MIB].
This MIB imports some common Textual Conventions from T11-TC-MIB, This MIB module imports some common Textual Conventions from T11-TC-
defined in [FC-FAM-MIB]. MIB, defined in [FC-FAM-MIB].
5. MIB Overview 5. MIB Overview
This MIB module provides the means for monitoring the operation of, This MIB module provides the means for monitoring the operation of,
and configuring some parameters of, one or more instances of the FSPF and configuring some parameters of, one or more instances of the FSPF
protocol. (Note that there are no definitions in this MIB module of protocol.
"managed actions" which can be invoked via SNMP.)
5.1. Fibre Channel management instance 5.1. Fibre Channel management instance
A Fibre Channel management instance is defined in [FC-MGMT] as a A Fibre Channel management instance is defined in [FC-MGMT] as a
separable managed instance of Fibre Channel functionality. Fibre separable managed instance of Fibre Channel functionality. Fibre
Channel functionality may be grouped into Fibre Channel management Channel functionality may be grouped into Fibre Channel management
instances in whatever way is most convenient for the instances in whatever way is most convenient for the
implementation(s). For example, one such grouping accommodates a implementation(s). For example, one such grouping accommodates a
single SNMP agent having multiple AgentX [RFC2741] sub-agents, with single SNMP agent having multiple AgentX [RFC2741] sub-agents, with
each sub-agent implementing a different Fibre Channel management each sub-agent implementing a different Fibre Channel management
skipping to change at page 6, line 34 skipping to change at page 6, line 34
5.3. Fabric Index 5.3. Fabric Index
The latest standard for an interconnecting Fabric containing multiple The latest standard for an interconnecting Fabric containing multiple
Fabric Switch elements is [FC-SW-4]. [FC-SW-4] specifies the Fabric Switch elements is [FC-SW-4]. [FC-SW-4] specifies the
operation of both a single Fabric in a physical infrastructure, as operation of both a single Fabric in a physical infrastructure, as
well as the support of multiple Virtual Fabrics operating within one well as the support of multiple Virtual Fabrics operating within one
(or more) physical infrastructures. Whether operating on a physical (or more) physical infrastructures. Whether operating on a physical
Fabric (i.e., without Virtual Fabrics) or within a Virtual Fabric, Fabric (i.e., without Virtual Fabrics) or within a Virtual Fabric,
the operation of FSPF within a Fabric is identical. Therefore, this the operation of FSPF within a Fabric is identical. Therefore, this
MIB defines all Fabric-related information in tables which are INDEX- MIB module defines all Fabric-related information in tables which are
ed by an arbitrary integer, named a "Fabric Index", the syntax of INDEX-ed by an arbitrary integer, named a "Fabric Index", the syntax
which is IMPORTed from the T11-TC-MIB. When a device is connected to of which is IMPORTed from the T11-TC-MIB. When a device is connected
a single physical Fabric, without use of any virtual Fabrics, the to a single physical Fabric, without use of any virtual Fabrics, the
value of this Fabric Index will always be 1. In an environment of value of this Fabric Index will always be 1. In an environment of
multiple virtual and/or physical Fabrics, this index provides a means multiple virtual and/or physical Fabrics, this index provides a means
to distinguish one Fabric from another. to distinguish one Fabric from another.
It is quite possible, and may even be likely, that a Fibre Channel It is quite possible, and may even be likely, that a Fibre Channel
switch will have ports connected to multiple virtual and/or physical switch will have ports connected to multiple virtual and/or physical
Fabrics. Thus, in order to simplify a management protocol query Fabrics. Thus, in order to simplify a management protocol query
concerning all the Fabrics to which a single switch is connected, concerning all the Fabrics to which a single switch is connected,
fcmSwitchIndex will be listed before t11FspfFabricIndex when they fcmSwitchIndex will be listed before t11FspfFabricIndex when they
both appear in the same INDEX clause. both appear in the same INDEX clause.
5.4. The MIB Groups 5.4. The MIB Groups
This section describes the four MIB groups contained in the MIB. This section describes the four MIB groups contained in the MIB
module.
5.4.1. The t11FspfGeneralGroup group 5.4.1. The t11FspfGeneralGroup group
This group provides for per-Fabric monitoring of the FSPF state and This group provides for per-Fabric monitoring of the FSPF state and
per-Fabric monitoring/configuration of FSPF parameters. per-Fabric monitoring/configuration of FSPF parameters.
5.4.2. The t11FspfIfGroup group 5.4.2. The t11FspfIfGroup group
This group provides for per-interface monitoring of FSPF This group provides for per-interface monitoring of FSPF
state/statistics and per-interface monitoring/configuration of FSPF state/statistics and per-interface monitoring/configuration of FSPF
skipping to change at page 8, line 28 skipping to change at page 8, line 28
TEXTUAL-CONVENTION, RowStatus, StorageType, TEXTUAL-CONVENTION, RowStatus, StorageType,
TruthValue FROM SNMPv2-TC -- [RFC2579] TruthValue FROM SNMPv2-TC -- [RFC2579]
ifIndex, InterfaceIndex FROM IF-MIB -- [RFC2863] ifIndex, InterfaceIndex FROM IF-MIB -- [RFC2863]
fcmInstanceIndex, fcmSwitchIndex, fcmInstanceIndex, fcmSwitchIndex,
FcDomainIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT] FcDomainIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT]
T11FabricIndex FROM T11-TC-MIB -- [FC-FAM-MIB] T11FabricIndex FROM T11-TC-MIB -- [FC-FAM-MIB]
t11FamConfigDomainId t11FamConfigDomainId
FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [FC-FAM-MIB] FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [FC-FAM-MIB]
t11FcFspfMIB MODULE-IDENTITY t11FcFspfMIB MODULE-IDENTITY
LAST-UPDATED "200510120000Z" LAST-UPDATED "200603130000Z"
ORGANIZATION "T11" ORGANIZATION "T11"
CONTACT-INFO CONTACT-INFO
"Claudio DeSanti "Claudio DeSanti
Cisco Systems, Inc. Cisco Systems, Inc.
170 West Tasman Drive 170 West Tasman Drive
San Jose, CA 95134 USA San Jose, CA 95134 USA
EMail: cds@cisco.com EMail: cds@cisco.com
Keith McCloghrie Keith McCloghrie
Cisco Systems, Inc. Cisco Systems, Inc.
170 West Tasman Drive 170 West Tasman Drive
San Jose, CA USA 95134 San Jose, CA USA 95134
Email: kzm@cisco.com" Email: kzm@cisco.com"
DESCRIPTION DESCRIPTION
"The MIB module for managing the Fabric Shortest Path "The MIB module for managing the Fabric Shortest Path
First (FSPF) protocol. FSPF is specified in FC-SW-4. First (FSPF) protocol. FSPF is specified in FC-SW-4.
Copyright (C) The Internet Society (2005). This version of Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC yyyy; see the RFC itself for this MIB module is part of RFC yyyy; see the RFC itself for
full legal notices." full legal notices."
-- RFC Editor: replace yyyy with actual RFC number & remove this note -- RFC Editor: replace yyyy with actual RFC number & remove this note
REVISION "200510120000Z" REVISION "200603130000Z"
DESCRIPTION DESCRIPTION
"Initial version of this MIB module, published as RFCyyyy." "Initial version of this MIB module, published as RFCyyyy."
-- RFC-Editor, replace yyyy with actual RFC number & remove this note -- RFC-Editor, replace yyyy with actual RFC number & remove this note
::= { mib-2 XXX } -- to be assigned by IANA ::= { mib-2 XXX } -- to be assigned by IANA
-- RFC Editor: replace XXX with IANA-assigned number & remove this note -- RFC Editor: replace XXX with IANA-assigned number & remove this note
t11FspfNotifications OBJECT IDENTIFIER ::= { t11FcFspfMIB 0 } t11FspfNotifications OBJECT IDENTIFIER ::= { t11FcFspfMIB 0 }
t11FspfObjects OBJECT IDENTIFIER ::= { t11FcFspfMIB 1 } t11FspfObjects OBJECT IDENTIFIER ::= { t11FcFspfMIB 1 }
t11FspfConformance OBJECT IDENTIFIER ::= { t11FcFspfMIB 2 } t11FspfConformance OBJECT IDENTIFIER ::= { t11FcFspfMIB 2 }
t11FspfConfiguration OBJECT IDENTIFIER ::= { t11FspfObjects 1 } t11FspfConfiguration OBJECT IDENTIFIER ::= { t11FspfObjects 1 }
t11FspfDatabase OBJECT IDENTIFIER ::= { t11FspfObjects 2 } t11FspfDatabase OBJECT IDENTIFIER ::= { t11FspfObjects 2 }
-- --
-- TEXTUAL CONVENTIONS -- TEXTUAL CONVENTIONS
T11FspfARegionNum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The AR number of an autonomous region. The backbone region
has zero as its AR number."
REFERENCE
"Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5,
May 2005, section D.2."
SYNTAX Integer32 (0..255)
T11FspfLsrType ::= TEXTUAL-CONVENTION T11FspfLsrType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Type of the Link State Record. "Type of the Link State Record.
FC-SW-4 defines two types of LSRs, and allows for the FC-SW-4 defines two types of LSRs, and allows for the
possibility of more being defined in the future: possibility of more being defined in the future:
01 - Switch Link Record 01 - Switch Link Record
02 - Obsolete 02 - Obsolete
240-255 - Vendor Specific 240-255 - Vendor Specific
others - Reserved. others - Reserved.
" "
REFERENCE REFERENCE
"Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 6.1.9.3." ANSI INCITS 418-2006, section 6.1.9.3."
SYNTAX Integer32 (0..255) SYNTAX Integer32 (0..255)
T11FspfLinkType ::= TEXTUAL-CONVENTION T11FspfLinkType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Type of an the FSPF Link. Presently defined values: "Type of an the FSPF Link. Presently defined values:
01 - Point-to-Point 1 - Point-to-Point
240-255 - Vendor Specific 240-255 - Vendor Specific
others - Reserved. all others - Reserved.
" "
REFERENCE REFERENCE
"Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 6.1.9.4." ANSI INCITS 418-2006, section 6.1.9.4."
SYNTAX Integer32 (0..255) SYNTAX Integer32 (0..255)
T11FspfInterfaceState ::= TEXTUAL-CONVENTION T11FspfInterfaceState ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The state of the FSPF Neighbor Finite State Machine "The state of the FSPF Neighbor Finite State Machine
for the neighbor (switch) on a particular interface. for the neighbor (switch) on a particular interface.
Possible values are : Possible values are :
down(1) - Down down(1) - Down
init(2) - Init init(2) - Init
dbExchange(3) - Database Exchange dbExchange(3) - Database Exchange
dbAckwait(4) - Database AckWait dbAckwait(4) - Database AckWait
dbWait(5) - Database Wait dbWait(5) - Database Wait
full(6) - Full (Connected) full(6) - Full (Connected)
" "
REFERENCE REFERENCE
"Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 8.7." ANSI INCITS 418-2006, section 8.7."
SYNTAX INTEGER { SYNTAX INTEGER {
down(1), down(1),
init(2), init(2),
dbExchange(3), dbExchange(3),
dbAckwait(4), dbAckwait(4),
dbWait(5), dbWait(5),
full(6) full(6)
} }
T11FspfLastCreationTime ::= TEXTUAL-CONVENTION T11FspfLastCreationTime ::= TEXTUAL-CONVENTION
skipping to change at page 11, line 45 skipping to change at page 11, line 39
Fabric (identified by a t11FspfFabricIndex value). Fabric (identified by a t11FspfFabricIndex value).
(Note that the local switch's per-fabric Domain-ID is (Note that the local switch's per-fabric Domain-ID is
available in t11FamConfigDomainId which is defined in available in t11FamConfigDomainId which is defined in
T11-FC-FABRIC-ADDR-MGR-MIB.)" T11-FC-FABRIC-ADDR-MGR-MIB.)"
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex } INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex }
::= { t11FspfTable 1 } ::= { t11FspfTable 1 }
T11FspfEntry ::= SEQUENCE { T11FspfEntry ::= SEQUENCE {
t11FspfFabricIndex T11FabricIndex, t11FspfFabricIndex T11FabricIndex,
t11FspfARegionNum T11FspfARegionNum,
t11FspfMinLsArrival Unsigned32, t11FspfMinLsArrival Unsigned32,
t11FspfMinLsInterval Unsigned32, t11FspfMinLsInterval Unsigned32,
t11FspfLsRefreshTime Unsigned32, t11FspfLsRefreshTime Unsigned32,
t11FspfMaxAge Unsigned32, t11FspfMaxAge Unsigned32,
t11FspfMaxAgeDiscards Counter32, t11FspfMaxAgeDiscards Counter32,
t11FspfPathComputations Counter32, t11FspfPathComputations Counter32,
t11FspfChecksumErrors Counter32, t11FspfChecksumErrors Counter32,
t11FspfLsrs Gauge32, t11FspfLsrs Gauge32,
t11FspfCreateTime T11FspfLastCreationTime, t11FspfCreateTime T11FspfLastCreationTime,
t11FspfAdminStatus INTEGER, t11FspfAdminStatus INTEGER,
t11FspfOperStatus INTEGER, t11FspfOperStatus INTEGER,
t11FspfLsrNumber Unsigned32,
t11FspfNbrStateChangNotifyEnable TruthValue, t11FspfNbrStateChangNotifyEnable TruthValue,
t11FspfSetToDefault INTEGER, t11FspfSetToDefault INTEGER,
t11FspfStorageType StorageType t11FspfStorageType StorageType
} }
t11FspfFabricIndex OBJECT-TYPE t11FspfFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex SYNTAX T11FabricIndex
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 12, line 35 skipping to change at page 12, line 27
In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
can operate within one (or more) physical infrastructures. can operate within one (or more) physical infrastructures.
In such a case, index value is used to uniquely identify a In such a case, index value is used to uniquely identify a
particular Fabric within a physical infrastructure. particular Fabric within a physical infrastructure.
In a Fabric which has (can have) only a single Fabric In a Fabric which has (can have) only a single Fabric
operating within the physical infrastructure, the operating within the physical infrastructure, the
value of this Fabric Index will always be 1." value of this Fabric Index will always be 1."
::= { t11FspfEntry 1 } ::= { t11FspfEntry 1 }
t11FspfARegionNum OBJECT-TYPE
SYNTAX T11FspfARegionNum
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AR number of this switch in this Fabric."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5,
May 2005, section D.3.1."
DEFVAL {0}
::= { t11FspfEntry 2 }
t11FspfMinLsArrival OBJECT-TYPE t11FspfMinLsArrival OBJECT-TYPE
SYNTAX Unsigned32 (0..65535) SYNTAX Unsigned32 (0..65535)
UNITS "milliSeconds" UNITS "milliSeconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum time after accepting a Link State Record "The minimum time after accepting a Link State Record
(LSR) on this Fabric before accepting another update of (LSR) on this Fabric before accepting another update of
the same LSR on the same Fabric. the same LSR on the same Fabric.
An LSR update that is not accepted because of this time An LSR update that is not accepted because of this time
interval is discarded." interval is discarded."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, sections 8.6.4.5 & 15.1." ANSI INCITS 418-2006, sections 8.6.4.5 & 15.1."
DEFVAL {1000} DEFVAL {1000}
::= { t11FspfEntry 4 } ::= { t11FspfEntry 2 }
t11FspfMinLsInterval OBJECT-TYPE t11FspfMinLsInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535) SYNTAX Unsigned32 (0..65535)
UNITS "milliSeconds" UNITS "milliSeconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum time after this switch sends an LSR on this "The minimum time after this switch sends an LSR on this
Fabric before it will send another update of the same LSR Fabric before it will send another update of the same LSR
on the same Fabric." on the same Fabric."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 15.1." ANSI INCITS 418-2006, section 15.1."
DEFVAL {5000} DEFVAL {5000}
::= { t11FspfEntry 5 } ::= { t11FspfEntry 3 }
t11FspfLsRefreshTime OBJECT-TYPE t11FspfLsRefreshTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "Minutes" UNITS "Minutes"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval between transmission of refresh LSRs on this "The interval between transmission of refresh LSRs on this
Fabric." Fabric."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, sections 8.5.1 & 15.1." ANSI INCITS 418-2006, sections 8.5.1 & 15.1."
DEFVAL {30} DEFVAL {30}
::= { t11FspfEntry 6 } ::= { t11FspfEntry 4 }
t11FspfMaxAge OBJECT-TYPE t11FspfMaxAge OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "Minutes" UNITS "Minutes"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum age an LSR will be retained in the FSPF "The maximum age an LSR will be retained in the FSPF
database on this Fabric. An LSR is removed from the database on this Fabric. An LSR is removed from the
database after MaxAge is reached." database after MaxAge is reached."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 15.1." ANSI INCITS 418-2006, section 15.1."
DEFVAL {60} DEFVAL {60}
::= { t11FspfEntry 7 } ::= { t11FspfEntry 5 }
t11FspfMaxAgeDiscards OBJECT-TYPE t11FspfMaxAgeDiscards OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of LSRs discarded due to their age reaching "The number of LSRs discarded due to their age reaching
t11FspfMaxAge in this Fabric. The last discontinuity of t11FspfMaxAge in this Fabric. The last discontinuity of
this counter is indicated by t11FspfCreateTime." this counter is indicated by t11FspfCreateTime."
::= { t11FspfEntry 8 } ::= { t11FspfEntry 6 }
t11FspfPathComputations OBJECT-TYPE t11FspfPathComputations OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times that the path computation algorithm "The number of times that the path computation algorithm
has been invoked by this Switch on this Fabric to compute has been invoked by this Switch on this Fabric to compute
a set of minimum cost paths for this Fabric. The last a set of minimum cost paths for this Fabric. The last
discontinuity of this counter is indicated by discontinuity of this counter is indicated by
t11FspfCreateTime." t11FspfCreateTime."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 8.1.1." ANSI INCITS 418-2006, section 8.1.1."
::= { t11FspfEntry 9 } ::= { t11FspfEntry 7 }
t11FspfChecksumErrors OBJECT-TYPE t11FspfChecksumErrors OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of FSPF checksum errors which were detected "The number of FSPF checksum errors which were detected
locally (and therefore discarded) on this Fabric. locally (and therefore discarded) on this Fabric.
The last discontinuity of this counter is indicated by The last discontinuity of this counter is indicated by
t11FspfCreateTime." t11FspfCreateTime."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 8.5.4." ANSI INCITS 418-2006, section 8.5.4."
::= { t11FspfEntry 10 } ::= { t11FspfEntry 8 }
t11FspfLsrs OBJECT-TYPE t11FspfLsrs OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current number of entries for this Fabric in the "The current number of entries for this Fabric in the
t11FspfLsrTable." t11FspfLsrTable."
::= { t11FspfEntry 19 } ::= { t11FspfEntry 9 }
t11FspfCreateTime OBJECT-TYPE t11FspfCreateTime OBJECT-TYPE
SYNTAX T11FspfLastCreationTime SYNTAX T11FspfLastCreationTime
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime when this entry was last created." "The value of sysUpTime when this entry was last created."
::= { t11FspfEntry 20 } ::= { t11FspfEntry 10 }
t11FspfAdminStatus OBJECT-TYPE t11FspfAdminStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up(1), up(1),
down(2) down(2)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The desired state of FSPF in this Fabric. If value of "The desired state of FSPF in this Fabric. If value of
this object is set to 'up', then FSPF is enabled in this object is set to 'up', then FSPF is enabled in
this Fabric. If set to 'down', then FSPF is disabled this Fabric. If set to 'down', then FSPF is disabled
in this Fabric -- when FSPF is disabled, FSPF provides in this Fabric -- when FSPF is disabled, FSPF provides
no routes to be included in the T11-FC-ROUTE-MIB module. no routes to be included in the T11-FC-ROUTE-MIB module.
(see the T11-FC-ROUTE-MIB)." (see the T11-FC-ROUTE-MIB)."
REFERENCE "T11-FC-ROUTE-MIB, The Fibre-Channel Routing REFERENCE "T11-FC-ROUTE-MIB, The Fibre-Channel Routing
Information MIB, RFCyyyy." Information MIB, RFCzzzz."
-- RFC Editor: pls replace zzzz with the RFC number & remove this note
DEFVAL {up} DEFVAL {up}
::= { t11FspfEntry 21 } ::= { t11FspfEntry 11 }
t11FspfOperStatus OBJECT-TYPE t11FspfOperStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up(1), up(1),
down(2) down(2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"State of FSPF in this Fabric. If 't11FspfAdminStatus' is "State of FSPF in this Fabric. If 't11FspfAdminStatus' is
'down' then the 't11FspfOperStatus' should be 'down'. 'down' then the 't11FspfOperStatus' should be 'down'.
If 't11FspfAdminStatus' is changed to 'up' then If 't11FspfAdminStatus' is changed to 'up' then
't11FspfOperStatus' should change to 'up' as and when 't11FspfOperStatus' should change to 'up' as and when
FSPF is active in this Fabric." FSPF is active in this Fabric."
::= { t11FspfEntry 22 } ::= { t11FspfEntry 12 }
t11FspfLsrNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of rows for this fabric in the
t11FspfLsrTable."
::= { t11FspfEntry 23 }
t11FspfNbrStateChangNotifyEnable OBJECT-TYPE t11FspfNbrStateChangNotifyEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies whether or not the local agent should "Specifies whether or not the local agent should
issue the notification 't11FspfNbrStateChangNotify' issue the notification 't11FspfNbrStateChangNotify'
when the local switch learns of a change of state when the local switch learns of a change of state
in the FSPF Neighbor Finite State Machine on an in the FSPF Neighbor Finite State Machine on an
interface in this Fabric. interface in this Fabric.
If the value of the object is 'true, then the If the value of the object is 'true, then the
notification is generated. If the value is 'false', notification is generated. If the value is 'false',
notification is not generated." notification is not generated."
DEFVAL { false } DEFVAL { false }
::= { t11FspfEntry 24 } ::= { t11FspfEntry 13 }
t11FspfSetToDefault OBJECT-TYPE t11FspfSetToDefault OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
default(1), default(1),
noOp(2) noOp(2)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Setting this value to 'default' changes the value of each "Setting this value to 'default' changes the value of each
and every write-able object in this row to its default and every write-able object in this row to its default
value. value.
No action is taken if this object is set to 'noOp'. No action is taken if this object is set to 'noOp'.
The value of the object when read is always 'noOp'." The value of the object when read is always 'noOp'."
::= { t11FspfEntry 25 } ::= { t11FspfEntry 14 }
t11FspfStorageType OBJECT-TYPE t11FspfStorageType OBJECT-TYPE
SYNTAX StorageType SYNTAX StorageType
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The storage type for read-write objects in this "The storage type for read-write objects in this
conceptual row." conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile } DEFVAL { nonVolatile }
::= { t11FspfEntry 26 } ::= { t11FspfEntry 15 }
-- --
-- t11FspfIfTable -- t11FspfIfTable
t11FspfIfTable OBJECT-TYPE t11FspfIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FspfIfEntry SYNTAX SEQUENCE OF T11FspfIfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table allows the users to configure and monitor "This table allows the users to configure and monitor
the FSPF parameters which are per-interface (identified the FSPF parameters which are per-interface (identified
by a t11FspfIfIndex value), per-Fabric (identified by a by a t11FspfIfIndex value), per-Fabric (identified by a
t11FspfFabricIndex value), and per-switch (identified by t11FspfFabricIndex value), and per-switch (identified by
values of fcmInstanceIndex and fcmSwitchIndex). values of fcmInstanceIndex and fcmSwitchIndex).
An entry is automatically created in this table when Creating a row in this table via t11FspfIfRowStatus
an E_Port becomes non-isolated in a particular Fabric. provides the means to specify non-default parameter value(s)
for an interface at a time when the relevant row in this
table would not otherwise exist because the interface is
either down or it is not an E_Port, but the corresponding
row in the t11FspfTable must already exist.
An entry is automatically deleted from this table if: After the non-default values have been specified for a
a) the corresponding interface is no longer an E_Port (e.g., port's parameters, they need to be retained in this table
a G_Port which is dynamically determined to be an F_Port), even when the port becomes 'isolated'. However, having
and all configurable parameters have default values; or unnecessary rows in this table clutters it up, and makes
b) the interface identified by t11FspfIfIndex no longer those rows that are useful harder for an NMS to find.
Therefore, when an E_Port becomes isolated, its row get
deleted if and only if all of its parameter values are the
default values; also, when an E_Port becomes non-isolated
in a particular Fabric, a row in this table needs to exist
and is automatically created if necessary.
The specific conditions for an automated/implicit deletion
of a row are:
a) if the corresponding interface is no longer an E_Port
(e.g., a G_Port which is dynamically determined to be an
F_Port), and all configurable parameters have default
values; or
b) if the interface identified by t11FspfIfIndex no longer
exists (e.g., because a line-card is physically removed); exists (e.g., because a line-card is physically removed);
or or
c) the corresponding row in the t11FspfTable is deleted. c) if the corresponding row in the t11FspfTable is deleted.
"
Creating an entry in this table via t11FspfIfRowStatus
provides the means to specify non-default parameter value(s)
for an interface at a time when the relevant row in this
table does not exist because the interface is either down
or it is not an E_Port, but the corresponding row in the
t11FspfTable must already exist."
::= { t11FspfConfiguration 2 } ::= { t11FspfConfiguration 2 }
t11FspfIfEntry OBJECT-TYPE t11FspfIfEntry OBJECT-TYPE
SYNTAX T11FspfIfEntry SYNTAX T11FspfIfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry containing FSPF information for the interface "An entry containing FSPF information for the interface
identified by t11FspfIfIndex, on the fabric identified identified by t11FspfIfIndex, on the fabric identified
by t11FspfFabricIndex, on the switch identified by by t11FspfFabricIndex, on the switch identified by
skipping to change at page 22, line 12 skipping to change at page 21, line 42
DESCRIPTION DESCRIPTION
"The state of FSPF's 'neighbor state machine', which is "The state of FSPF's 'neighbor state machine', which is
the operational state of the interaction with the the operational state of the interaction with the
neighbor's interface which is connected to this interface. neighbor's interface which is connected to this interface.
If the 't11FspfIfAdminStatus' is 'down', then this object If the 't11FspfIfAdminStatus' is 'down', then this object
should be 'down'. If the 't11FspfIfAdminStatus' is 'up' should be 'down'. If the 't11FspfIfAdminStatus' is 'up'
then this object's value depends on the state of FSPF's then this object's value depends on the state of FSPF's
'neighbor state machine' on this interface in this 'neighbor state machine' on this interface in this
Fabric." Fabric."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 8.7" ANSI INCITS 418-2006, section 8.7"
::= { t11FspfIfEntry 13 } ::= { t11FspfIfEntry 13 }
t11FspfIfNbrDomainId OBJECT-TYPE t11FspfIfNbrDomainId OBJECT-TYPE
SYNTAX FcDomainIdOrZero SYNTAX FcDomainIdOrZero
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Domain Id of the neighbor in this Fabric." "The Domain Id of the neighbor in this Fabric."
::= { t11FspfIfEntry 14 } ::= { t11FspfIfEntry 14 }
t11FspfIfNbrPortIndex OBJECT-TYPE t11FspfIfNbrPortIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295) SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The index, as known by the neighbor, of the neighbor's "The index, as known by the neighbor, of the neighbor's
interface which is connected to this interface in this interface which is connected to this interface in this
Fabric." Fabric."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 6.1.9.4." ANSI INCITS 418-2006, section 6.1.9.4."
::= { t11FspfIfEntry 15 } ::= { t11FspfIfEntry 15 }
t11FspfIfAdminStatus OBJECT-TYPE t11FspfIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up(1), up(1),
down(2) down(2)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 24, line 9 skipping to change at page 23, line 39
of sending a frame on this interface in this Fabric. of sending a frame on this interface in this Fabric.
The formula is used to calculate the link cost is: The formula is used to calculate the link cost is:
Link Cost = S * (1.0625e12 / ifSpeed) Link Cost = S * (1.0625e12 / ifSpeed)
where: where:
S = (the value of this object / 100) S = (the value of this object / 100)
ifSpeed = interface speed (as defined in the IF-MIB). ifSpeed = interface speed (as defined in the IF-MIB).
" "
REFERENCE REFERENCE
"Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.5, "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
May 2005, section 8.5.5; and ANSI INCITS 418-2006, section 8.5.5; and
the IF-MIB, RFC 2863." IF-MIB, RFC 2863."
DEFVAL { 100 } DEFVAL { 100 }
::= { t11FspfIfEntry 19 } ::= { t11FspfIfEntry 19 }
t11FspfIfStorageType OBJECT-TYPE t11FspfIfStorageType OBJECT-TYPE
SYNTAX StorageType SYNTAX StorageType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The storage type for this conceptual row. "The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not Conceptual rows having the value 'permanent' need not
skipping to change at page 28, line 23 skipping to change at page 28, line 4
T11FspfLinkEntry ::= SEQUENCE { T11FspfLinkEntry ::= SEQUENCE {
t11FspfLinkIndex Unsigned32, t11FspfLinkIndex Unsigned32,
t11FspfLinkNbrDomainId FcDomainIdOrZero, t11FspfLinkNbrDomainId FcDomainIdOrZero,
t11FspfLinkPortIndex Unsigned32, t11FspfLinkPortIndex Unsigned32,
t11FspfLinkNbrPortIndex Unsigned32, t11FspfLinkNbrPortIndex Unsigned32,
t11FspfLinkType T11FspfLinkType, t11FspfLinkType T11FspfLinkType,
t11FspfLinkCost Integer32 t11FspfLinkCost Integer32
} }
t11FspfLinkIndex OBJECT-TYPE t11FspfLinkIndex OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An arbitrary index of this link." "An arbitrary index of this link."
::= { t11FspfLinkEntry 1 } ::= { t11FspfLinkEntry 1 }
t11FspfLinkNbrDomainId OBJECT-TYPE t11FspfLinkNbrDomainId OBJECT-TYPE
SYNTAX FcDomainIdOrZero SYNTAX FcDomainIdOrZero
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at page 31, line 26 skipping to change at page 31, line 7
OBJECT t11FspfIfStorageType OBJECT t11FspfIfStorageType
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT t11FspfNbrStateChangNotifyEnable OBJECT t11FspfNbrStateChangNotifyEnable
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT t11FspfARegionNum
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FspfMinLsArrival OBJECT t11FspfMinLsArrival
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT t11FspfMinLsInterval OBJECT t11FspfMinLsInterval
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
skipping to change at page 33, line 8 skipping to change at page 32, line 22
OBJECT t11FspfIfLinkCostFactor OBJECT t11FspfIfLinkCostFactor
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
::= { t11FspfMIBCompliances 1 } ::= { t11FspfMIBCompliances 1 }
-- Units of Conformance -- Units of Conformance
t11FspfGeneralGroup OBJECT-GROUP t11FspfGeneralGroup OBJECT-GROUP
OBJECTS { t11FspfARegionNum, OBJECTS { t11FspfMinLsArrival,
t11FspfMinLsArrival,
t11FspfMinLsInterval, t11FspfMinLsInterval,
t11FspfLsRefreshTime, t11FspfLsRefreshTime,
t11FspfMaxAge, t11FspfMaxAge,
t11FspfMaxAgeDiscards, t11FspfMaxAgeDiscards,
t11FspfPathComputations, t11FspfPathComputations,
t11FspfChecksumErrors, t11FspfChecksumErrors,
t11FspfLsrs, t11FspfLsrs,
t11FspfCreateTime, t11FspfCreateTime,
t11FspfAdminStatus, t11FspfAdminStatus,
t11FspfOperStatus, t11FspfOperStatus,
t11FspfLsrNumber,
t11FspfNbrStateChangNotifyEnable, t11FspfNbrStateChangNotifyEnable,
t11FspfSetToDefault, t11FspfSetToDefault,
t11FspfStorageType } t11FspfStorageType }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects for displaying and "A collection of objects for displaying and
configuring FSPF parameters." configuring FSPF parameters."
::= { t11FspfMIBGroups 1 } ::= { t11FspfMIBGroups 1 }
t11FspfIfGroup OBJECT-GROUP t11FspfIfGroup OBJECT-GROUP
skipping to change at page 36, line 5 skipping to change at page 35, line 6
Technical Committee T11, including the following: Technical Committee T11, including the following:
T11 Chair: Robert Snively, Brocade T11 Chair: Robert Snively, Brocade
T11 Vice Chair: Claudio DeSanti, Cisco Systems T11 Vice Chair: Claudio DeSanti, Cisco Systems
T11.5 Chair: Roger Cummings, Symantec T11.5 Chair: Roger Cummings, Symantec
T11.5 members, especially: T11.5 members, especially:
Ken Hirata, Emulex Ken Hirata, Emulex
Scott Kipp, McData Scott Kipp, McData
Elizabeth G. Rodriguez, Dot Hill Elizabeth G. Rodriguez, Dot Hill
The document was subsequently approved by the IETF's IMSS Working Group,
chaired by David Black (EMC Corporation). We also wish to acknowledge
Bert Wijnen (Lucent Technologies), the IETF Area Director, for his
review of the document.
9. Normative References 9. Normative References
[RFC2578] [RFC2578]
McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M.
and S. Waldbusser, "Structure of Management Information Version 2 and S. Waldbusser, "Structure of Management Information Version 2
(SMIv2)", STD 58, RFC 2578, April 1999. (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] [RFC2579]
McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M.
and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC
skipping to change at page 36, line 36 skipping to change at page 35, line 42
[RFC3411] [RFC3411]
Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for
Describing Simple Network Management Protocol (SNMP) Management Describing Simple Network Management Protocol (SNMP) Management
Frameworks", STD 58, RFC 3411, December 2002. Frameworks", STD 58, RFC 3411, December 2002.
[FC-FS] [FC-FS]
"Fibre Channel - Framing and Signaling (FC-FS)" ANSI INCITS "Fibre Channel - Framing and Signaling (FC-FS)" ANSI INCITS
373-2003, April 2003. 373-2003, April 2003.
[FC-SW-4] [FC-SW-4]
"Fibre Channel - Switch Fabric - 4 (FC-SW-4)", ANSI NCITS xxx-xxxx, "Fibre Channel - Switch Fabric - 4 (FC-SW-4)", ANSI INCITS
T11/Project 1674-D/Rev 7.5, June 2005. 418-2006, 2006.
[FC-MGMT] [FC-MGMT]
K. McCloghrie, "Fibre Channel Management MIB", RFC 4044, May 2005. K. McCloghrie, "Fibre Channel Management MIB", RFC 4044, May 2005.
[FC-FAM-MIB] [FC-FAM-MIB]
DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai, "Fibre- DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai, "Fibre-
Channel Fabric Address Manager MIB", Internet-Draft (draft-ietf- Channel Fabric Address Manager MIB", Internet-Draft (draft-ietf-
imss-fc-fam-mib-nn.txt), work-in-progress. imss-fc-fam-mib-nn.txt), work-in-progress.
[FC-RTM-MIB] [FC-RTM-MIB]
skipping to change at page 37, line 36 skipping to change at page 36, line 45
12. Security Considerations 12. Security Considerations
There are several management objects defined in this MIB module with There are several management objects defined in this MIB module with
a MAX-ACCESS clause of read-write and/or read-create. Such objects a MAX-ACCESS clause of read-write and/or read-create. Such objects
may be considered sensitive or vulnerable in some network may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on environment without proper protection can have a negative effect on
network operations. These objects and their network operations. These objects and their
sensitivity/vulnerability are: sensitivity/vulnerability are:
t11FspfARegionNum, t11FspfMinLsArrival, t11FspfMinLsInterval, t11FspfMinLsArrival, t11FspfMinLsInterval,
t11FspfIfHelloInterval, t11FspfIfDeadInterval & t11FspfIfHelloInterval, t11FspfIfDeadInterval &
t11FspfIfRetransmitInterval t11FspfIfRetransmitInterval
-- alter the responsiveness of the FSPF protocol -- alter the responsiveness of the FSPF protocol
t11FspfAdminStatus & t11FspfIfAdminStatus t11FspfAdminStatus & t11FspfIfAdminStatus
-- enable/disable dynamic routing via FSPF -- enable/disable dynamic routing via FSPF
t11FspfSetToDefault & t11FspfIfSetToDefault t11FspfSetToDefault & t11FspfIfSetToDefault
-- nullify valid configuration changes -- nullify valid configuration changes
t11FspfIfLinkCostFactor t11FspfIfLinkCostFactor
-- alter the choice of links -- alter the choice of links
t11FspfNbrStateChangNotifyEnable t11FspfNbrStateChangNotifyEnable
-- enable/disable notifications. -- enable/disable notifications.
The support for SET operations in a non-secure environment without The support for SET operations in a non-secure environment without
proper protection can have a negative effect on network operations. proper protection can have a negative effect on network operations.
Some of the readable objects in this MIB module (i.e., objects with a Some of the readable objects in this MIB module (i.e., objects with a
skipping to change at page 39, line 29 skipping to change at page 38, line 33
EMail: vgaonkar@cisco.com EMail: vgaonkar@cisco.com
Keith McCloghrie Keith McCloghrie
Cisco Systems, Inc. Cisco Systems, Inc.
170 West Tasman Drive 170 West Tasman Drive
San Jose, CA USA 95134 San Jose, CA USA 95134
Phone: +1 408-526-5260 Phone: +1 408-526-5260
Email: kzm@cisco.com Email: kzm@cisco.com
Silvano Gai Silvano Gai
Cisco Systems, Inc. Retired
170 West Tasman Drive
San Jose, CA USA 95134
Phone: +1 408-526-7269
Email: sgai@cisco.com
Full Copyright Statement Full Copyright Statement
Copyright (C) The Internet Society (2005). This document is subject Copyright (C) The Internet Society (2006). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights. except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
 End of changes. 61 change blocks. 
140 lines changed or deleted 118 lines changed or added

This html diff was produced by rfcdiff 1.29, available from http://www.levkowetz.com/ietf/tools/rfcdiff/