draft-ietf-imss-fc-fam-mib-00.txt   draft-ietf-imss-fc-fam-mib-01.txt 
Internet Draft C. DeSanti Internet Draft C. DeSanti
V. Gaonkar V. Gaonkar
K. McCloghrie K. McCloghrie
S. Gai S. Gai
Cisco Systems Cisco Systems
9 October 2004 16 February 2005
Fibre Channel Fabric Address Manager MIB Fibre Channel Fabric Address Manager MIB
draft-ietf-imss-fc-fam-mib-00.txt draft-ietf-imss-fc-fam-mib-01.txt
Status of this Memo Status of this Memo
By submitting this Internet-Draft, I certify that any applicable By submitting this Internet-Draft, I certify that any applicable
patent or other IPR claims of which I am aware have been disclosed, patent or other IPR claims of which I am aware have been disclosed,
and any of which I become aware will be disclosed, in accordance with or will be disclosed, and any of which I become aware will be
RFC 3668. disclosed, in accordance with RFC 3668.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet- other groups may also distribute working documents as Internet-
Drafts. Drafts.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet- Drafts as reference time. It is inappropriate to use Internet- Drafts as reference
material or to cite them other than as "work in progress". material or to cite them other than as "work in progress".
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2004). All Rights Reserved. Copyright (C) The Internet Society (2005). All Rights Reserved.
Abstract Abstract
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community. for use with network management protocols in the Internet community.
In particular, it describes managed objects for information related In particular, it describes managed objects for information related
to a Fibre Channel network's Fabric Address Manager. At present, to a Fibre Channel network's Fabric Address Manager. In the past,
this memo is a work item of T11.5 (http://www.t11.org). The plan is this memo was a work item of T11.5 (http://www.t11.org). After T11
that it will later be a work item of the IETF's IMSS working group. approved it, it became a work item of the IETF's IMSS working group.
Table of Contents Table of Contents
1 Introduction ................................................. 3 1 Introduction ................................................. 3
2 The Internet-Standard Management Framework ................... 3 1.1 Log of Recent Changes ...................................... 3
3 Short Overview of Fibre Channel .............................. 3 2 The Internet-Standard Management Framework ................... 4
4 Relationship to Other MIBs ................................... 4 3 Short Overview of Fibre Channel .............................. 4
5 MIB Overview ................................................. 5 4 Relationship to Other MIBs ................................... 5
5.1 Fibre Channel management instance .......................... 5 5 MIB Overview ................................................. 6
5.2 Switch Index ............................................... 5 5.1 Fibre Channel management instance .......................... 6
5.3 Fabric Index ............................................... 5 5.2 Switch Index ............................................... 6
5.4 The t11FamGroup group ...................................... 6 5.3 Fabric Index ............................................... 6
5.5 The t11FamDatabaseGroup group .............................. 6 5.4 The t11FamGroup group ...................................... 7
5.6 The t11FamAreaGroup group .................................. 6 5.5 The t11FamDatabaseGroup group .............................. 7
5.7 The t11FamCacheGroup group ................................. 6 5.6 The t11FamAreaGroup group .................................. 7
5.8 The t11FamCommandGroup group ............................... 6 5.7 The t11FamCacheGroup group ................................. 7
5.8 The t11FamCommandGroup group ............................... 7
5.9 The t11FamNotificationGroup group .......................... 7 5.9 The t11FamNotificationGroup group .......................... 7
5.10 Use of RCF and BF ......................................... 7 5.10 Use of RCF and BF ......................................... 8
6 Definitions .................................................. 8 6 Definitions .................................................. 9
6.1 T11-TC-MIB ................................................. 8 6.1 The T11-TC-MIB Module ...................................... 9
6.2 T11-FC-FABRIC-ADDR-MGR-MIB ................................. 9 6.2 The T11-FC-FABRIC-ADDR-MGR-MIB Module ...................... 10
7 Intellectual Property ........................................ 34 7 Intellectual Property ........................................ 37
8 Acknowledgements ............................................. 34 8 Acknowledgements ............................................. 37
9 Normative References ......................................... 34 9 Normative References ......................................... 37
10 Informative References ...................................... 35 10 Informative References ...................................... 38
11 Security Considerations ..................................... 36 11 IANA Considerations ......................................... 39
12 Authors' Addresses .......................................... 37 12 Security Considerations ..................................... 39
13 Full Copyright Statement .................................... 38 13 Authors' Addresses .......................................... 40
1. Introduction 1. Introduction
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community. for use with network management protocols in the Internet community.
In particular, it describes managed objects for information related In particular, it describes managed objects for information related
to a Fibre Channel network's Fabric Address Manager. Fabric Address to a Fibre Channel network's Fabric Address Manager. Fabric Address
Manager refers to the functionality of acquiring DomainID(s) as Manager refers to the functionality of acquiring DomainID(s) as
specified in [FC-SW-3], and managing Fibre Channel Identifiers as specified in [FC-SW-3], and managing Fibre Channel Identifiers as
specified in [FC-FS]. specified in [FC-FS].
1.1. Log of Recent Changes
This section to be deleted when the document becomes approved.
1.1.1. Initial version
The initial version was submitted to T11.5 as 04-079v0 on 18 January
2004 (at that time, it was called the Fibre Channel Domain Manager
MIB).
1.1.2. 16 February 2005 version
The following changes were made for the version was submitted to the
IETF as: draft-ietf-imss-fc-fam-mib-01.txt.
- t11FamEnable & t11FamFabricName were added as additional objects in
the t11FamTable. A strong warning was included concerning the need
for a Fabric name (the value of t11FamFabricName) to be the same on
all switches in a Fabric.
- an additional enumeration, 'disabled(11)', was added to
T11FamState.
- the syntax and DESCRIPTIONs of t11FamConfigDomainId &
t11FamConfigDomainIdType were modified.
- the syntax of T11FabricIndex was updated to have a range of
(0..4095) so as to be consistent with [FC-SW-4], for which the 22
October 2004 version says that a "VF_ID Bitmap" is 512 bytes long,
with the high-order bit representing VF_ID zero, and the low-order
bit representing 4095.
2. The Internet-Standard Management Framework 2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the Objects in the MIB are defined using the mechanisms defined in the
skipping to change at page 5, line 46 skipping to change at page 6, line 40
Channel management instances. Each Fibre Channel management instance Channel management instances. Each Fibre Channel management instance
can manage one or more Fibre Channel switches. The Switch Index, can manage one or more Fibre Channel switches. The Switch Index,
fcmSwitchIndex, is IMPORTed from the FC-MGMT-MIB as the index value fcmSwitchIndex, is IMPORTed from the FC-MGMT-MIB as the index value
to uniquely identify a Fibre Channel switch amongst those (one or to uniquely identify a Fibre Channel switch amongst those (one or
more) managed by the same Fibre Channel management instance. more) managed by the same Fibre Channel management instance.
5.3. Fabric Index 5.3. Fabric Index
The current standard for an interconnecting Fabric consisting of The current standard for an interconnecting Fabric consisting of
multiple Fabric Switch elements is [FC-SW-3], which describes the multiple Fabric Switch elements is [FC-SW-3], which describes the
operation of a single Fabric in a physical infrastructure. It is operation of a single Fabric in a physical infrastructure.
possible that future standards will define how multiple Fabrics could Forthcoming standards, e.g., [FC-SW-4], will likely define how
operate within one (or more) physical infrastructures. In such a multiple Fabrics could operate within one (or more) physical
scenario, each Fabric would, of course, have its own management infrastructures. In such a scenario, each Fabric would, of course,
instrumentation. Therefore, to *allow* for this future possibility, have its own management instrumentation. Therefore, to allow for
this MIB defines all Fabric-related information in tables which are this possibility, this MIB defines all Fabric-related information in
INDEX-ed by an arbitrary integer, named a "Fabric Index", . In a tables which are INDEX-ed by an arbitrary integer, named a "Fabric
Fabric which is conformant to [FC-SW-3], the value of this Fabric Index". In a Fabric which is conformant to [FC-SW-3], the value of
Index will always be 1. this Fabric Index will always be 1.
It is quite possible, and may even become likely, that (a port of) a It is quite possible, and may even become likely, that (a port of) a
Fibre Channel switch will be connected to multiple such Fabrics. Fibre Channel switch will be connected to multiple such Fabrics.
Thus, in order to simplify a query concerning all the Fabrics to Thus, in order to simplify a query concerning all the Fabrics to
which a single switch is connected, fcmSwitchIndex will be listed which a single switch is connected, fcmSwitchIndex will be listed
before t11FamFabricIndex when they both appear in the same INDEX before t11FamFabricIndex when they both appear in the same INDEX
clause. clause.
5.4. The t11FamGroup group 5.4. The t11FamGroup group
skipping to change at page 8, line 7 skipping to change at page 9, line 7
minimum required level of support for these two objects is read-only. minimum required level of support for these two objects is read-only.
Further, for both t11FamAutoReconfigure and t11FamRestart, the MIB Further, for both t11FamAutoReconfigure and t11FamRestart, the MIB
serves only as a request to generate; it does not represent the serves only as a request to generate; it does not represent the
action of the RCF or BF. That is, a successful SNMP SetRequest on action of the RCF or BF. That is, a successful SNMP SetRequest on
these objects will cause an RCF (or BF) to be sent, but SNMP does these objects will cause an RCF (or BF) to be sent, but SNMP does
not/can not ensure the successful operation of the SW_ILS operation. not/can not ensure the successful operation of the SW_ILS operation.
6. Definitions 6. Definitions
6.1. T11-TC-MIB 6.1. The T11-TC-MIB Module
T11-TC-MIB DEFINITIONS ::= BEGIN T11-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] MODULE-IDENTITY, Unsigned32, mib-2
FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION FROM SNMPv2-TC; -- [RFC2579] TEXTUAL-CONVENTION FROM SNMPv2-TC; -- [RFC2579]
t11TcMIB MODULE-IDENTITY t11TcMIB MODULE-IDENTITY
LAST-UPDATED "200406050000Z" LAST-UPDATED "200502080000Z"
ORGANIZATION "T11" ORGANIZATION "T11"
CONTACT-INFO CONTACT-INFO
" Claudio DeSanti " Claudio DeSanti
Cisco Systems, Inc. Cisco Systems, Inc.
170 West Tasman Drive 170 West Tasman Drive
San Jose, CA 95134 USA San Jose, CA 95134 USA
Phone: +1 408 853-9172 Phone: +1 408 853-9172
EMail: cds@cisco.com EMail: cds@cisco.com
Keith McCloghrie Keith McCloghrie
Cisco Systems, Inc. Cisco Systems, Inc.
170 West Tasman Drive 170 West Tasman Drive
San Jose, CA USA 95134 San Jose, CA USA 95134
Phone: +1 408-526-5260 Phone: +1 408-526-5260
Email: kzm@cisco.com" Email: kzm@cisco.com"
DESCRIPTION DESCRIPTION
"This module defines textual conventions used in T11 MIBs." "This module defines textual conventions used in T11 MIBs.
REVISION "200406050000Z"
Copyright (C) The Internet Society (2005). This version
of this MIB module is part of RFC yyyy; see the RFC
itself for full legal notices."
-- RFC Ed.: replace yyyy with actual RFC number & remove this note
REVISION "200502080000Z"
DESCRIPTION DESCRIPTION
"Initial version of this MIB module." "Initial version of this MIB module."
::= { tbd } ::= { mib-2 nn } -- to be assigned by IANA
FabricIndex ::= TEXTUAL-CONVENTION T11FabricIndex ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A Fabric Index which is used as a unique "A Fabric Index which is used as a unique
index value to identify a particular Fabric within index value to identify a particular Fabric within
one (or more) physical infrastructures. one (or more) physical infrastructures.
In an environment which is conformant to FC-SW-3, where In an environment which is conformant to FC-SW-3, where
there is always exactly one Fabric in a single physical there is always exactly one Fabric in a single physical
infrastructure, the value of this Fabric Index will infrastructure, the value of this Fabric Index will
always be 1. always be 1.
In environments conformant to other specifications, the In environments conformant to other specifications, the
value of this Fabric Index can have other values." value of this Fabric Index can have other values."
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..4095)
END END
6.2. T11-FC-FABRIC-ADDR-MGR-MIB 6.2. The T11-FC-FABRIC-ADDR-MGR-MIB Module
T11-FC-FABRIC-ADDR-MGR-MIB DEFINITIONS ::= BEGIN T11-FC-FABRIC-ADDR-MGR-MIB DEFINITIONS ::= BEGIN
-- the Fibre Channel Fabric Address Manager MIB -- the Fibre Channel Fabric Address Manager MIB
-- --
-- for management of the functionality, in Fibre Channel switches, -- for management of the functionality, in Fibre Channel switches,
-- which is used to manage fabric configuration, domains, and -- which is used to manage fabric configuration, domains, and
-- addresses within a domain. -- addresses within a domain.
-- --
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, Unsigned32, NOTIFICATION-TYPE, Unsigned32,
Counter32, Gauge32 FROM SNMPv2-SMI -- [RFC2578] Counter32, Gauge32, mib-2 FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP, MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580] NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580]
TEXTUAL-CONVENTION, TruthValue, TEXTUAL-CONVENTION, TruthValue,
RowStatus FROM SNMPv2-TC -- [RFC2579] RowStatus FROM SNMPv2-TC -- [RFC2579]
ifIndex FROM IF-MIB -- [IF-MIB] ifIndex FROM IF-MIB -- [IF-MIB]
fcmInstanceIndex, fcmSwitchIndex, fcmInstanceIndex, fcmSwitchIndex,
FcDomainIdOrZero, FcNameIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT] FcDomainIdOrZero, FcNameIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT]
FabricIndex FROM T11-TC-MIB; T11FabricIndex FROM T11-TC-MIB;
t11FabricAddrMgrMIB MODULE-IDENTITY t11FabricAddrMgrMIB MODULE-IDENTITY
LAST-UPDATED "200407170000Z" LAST-UPDATED "200502080000Z"
ORGANIZATION "T11" ORGANIZATION "T11"
CONTACT-INFO CONTACT-INFO
" Claudio DeSanti " Claudio DeSanti
Cisco Systems, Inc. Cisco Systems, Inc.
170 West Tasman Drive 170 West Tasman Drive
San Jose, CA 95134 USA San Jose, CA 95134 USA
Phone: +1 408 853-9172 Phone: +1 408 853-9172
EMail: cds@cisco.com EMail: cds@cisco.com
Keith McCloghrie Keith McCloghrie
skipping to change at page 10, line 16 skipping to change at page 11, line 23
San Jose, CA USA 95134 San Jose, CA USA 95134
Phone: +1 408-526-5260 Phone: +1 408-526-5260
Email: kzm@cisco.com" Email: kzm@cisco.com"
DESCRIPTION DESCRIPTION
"The MIB module for the Fabric Address management functionality "The MIB module for the Fabric Address management functionality
defined by the Fibre Channel standards. For the purposes of defined by the Fibre Channel standards. For the purposes of
this MIB, Fabric Address Manager refers to the functionality of this MIB, Fabric Address Manager refers to the functionality of
acquiring DomainID(s) as specified in FC-SW-3, and managing acquiring DomainID(s) as specified in FC-SW-3, and managing
Fibre Channel Identifiers as specified in FC-FS. An instance Fibre Channel Identifiers as specified in FC-FS. An instance
of 'Fabric Address Manager' software functionality executes in of 'Fabric Address Manager' software functionality executes in
the principal switch, and in each other switch." the principal switch, and in each other switch.
REVISION "200407170000Z"
Copyright (C) The Internet Society (2005). This version
of this MIB module is part of RFC yyyy; see the RFC
itself for full legal notices."
-- RFC Ed.: replace yyyy with actual RFC number & remove this note
REVISION "200502080000Z"
DESCRIPTION DESCRIPTION
"Initial version of this MIB module." "Initial version of this MIB module."
::= { tbd } ::= { mib-2 nn } -- to be assigned by IANA
t11FamMIBObjects OBJECT IDENTIFIER ::= { t11FabricAddrMgrMIB 1 } t11FamMIBObjects OBJECT IDENTIFIER ::= { t11FabricAddrMgrMIB 1 }
t11FamMIBConformance OBJECT IDENTIFIER ::= { t11FabricAddrMgrMIB 2 } t11FamMIBConformance OBJECT IDENTIFIER ::= { t11FabricAddrMgrMIB 2 }
t11FamConfiguration OBJECT IDENTIFIER ::= { t11FamMIBObjects 1 } t11FamConfiguration OBJECT IDENTIFIER ::= { t11FamMIBObjects 1 }
t11FamInfo OBJECT IDENTIFIER ::= { t11FamMIBObjects 2 } t11FamInfo OBJECT IDENTIFIER ::= { t11FamMIBObjects 2 }
t11FamNotifyControl OBJECT IDENTIFIER ::= { t11FamMIBObjects 3 } t11FamNotifyControl OBJECT IDENTIFIER ::= { t11FamMIBObjects 3 }
t11FamNotifications OBJECT IDENTIFIER ::= { t11FamMIBObjects 0 } t11FamNotifications OBJECT IDENTIFIER ::= { t11FamMIBObjects 0 }
-- Textual Conventions -- Textual Conventions
T11FamDomainPriority ::= TEXTUAL-CONVENTION T11FamDomainPriority ::= TEXTUAL-CONVENTION
skipping to change at page 11, line 15 skipping to change at page 12, line 30
connects, or (if not connected) the state of the interface: connects, or (if not connected) the state of the interface:
nonPrincipal (1) - non-Principal ISL nonPrincipal (1) - non-Principal ISL
principalUpstream (2) - Upstream Principal ISL principalUpstream (2) - Upstream Principal ISL
principalDownsteam (3) - Downstream Principal ISL principalDownsteam (3) - Downstream Principal ISL
isolated (4) - interface is isolated isolated (4) - interface is isolated
down (5) - interface is down down (5) - interface is down
unknown (6) - state/role is unknown unknown (6) - state/role is unknown
" "
REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3), REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
ANSI INCITS 384-2004, June 2004, Sections 3.1, 5.7, ANSI INCITS 384-2004, Sections 3.1, 5.7,
and Figure 9." and Figure 9."
SYNTAX INTEGER { SYNTAX INTEGER {
nonPrincipal (1), nonPrincipal (1),
principalUpstream (2), principalUpstream (2),
principalDownsteam (3), principalDownsteam (3),
isolated (4), isolated (4),
down (5), down (5),
unknown (6) unknown (6)
} }
skipping to change at page 12, line 18 skipping to change at page 13, line 33
- 'unconfigured' represents a switch which requires operator - 'unconfigured' represents a switch which requires operator
input before it can begin the process represented by the input before it can begin the process represented by the
first row in Table 86, first row in Table 86,
- 'buildFabricPhase' represents a switch which is in state F0 - 'buildFabricPhase' represents a switch which is in state F0
of Figure 15. of Figure 15.
- 'reconfigureFabricPhase' represents a switch which is in - 'reconfigureFabricPhase' represents a switch which is in
state F1 of Figure 15. state F1 of Figure 15.
- 'disabled' represents any situation in which the
corresponding instance of t11FamEnable has the value 'false'.
- 'unknown' represents a switch which is confused about what - 'unknown' represents a switch which is confused about what
state it is in. state it is in.
- 'other' represents a switch which is in a state not - 'other' represents a switch which is in a state not
represented by any of the above enumerations." represented by any of the above enumerations."
REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3), REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
ANSI INCITS 384-2004, Table 86 and Figure 15." ANSI INCITS 384-2004, Table 86 and Figure 15."
SYNTAX INTEGER { SYNTAX INTEGER {
other(1), other(1),
starting(2), starting(2),
unconfigured(3), unconfigured(3),
principalSwitchSelection(4), principalSwitchSelection(4),
domainIdDistribution(5), domainIdDistribution(5),
buildFabricPhase(6), buildFabricPhase(6),
reconfigureFabricPhase(7), reconfigureFabricPhase(7),
stable(8), stable(8),
stableWithNoEports(9), stableWithNoEports(9),
noDomains(10), noDomains(10),
unknown(11) disabled(11),
unknown(12)
} }
-- --
-- t11FamTable -- t11FamTable
-- --
t11FamTable OBJECT-TYPE t11FamTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FamEntry SYNTAX SEQUENCE OF T11FamEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains Fabric Address Manager related "This table contains Fabric Address Manager related
parameters which are able to be configured and monitored in parameters which are able to be configured and monitored
a Fibre Channel switch. For each of the switches in a Fibre Channel switch. For each of the switches
(identified by fcmSwitchIndex) managed by a Fibre Channel (identified by fcmSwitchIndex) managed by a Fibre Channel
management instance (identified by fcmInstanceIndex), there management instance (identified by fcmInstanceIndex),
is an entry for each Fabric known to such a switch. Entries there is any entry for each Fabric known to that switch.
are implicitly created/removed if and when additional Entries are implicitly created/removed if and when
Fabrics are created/deleted." additional Fabrics are created/deleted."
::= { t11FamConfiguration 1 } ::= { t11FamConfiguration 1 }
t11FamEntry OBJECT-TYPE t11FamEntry OBJECT-TYPE
SYNTAX T11FamEntry SYNTAX T11FamEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry provides information on the local Fabric Address "An entry provides information on the local Fabric Address
Manager functionality for a Fabric known to a Manager functionality for a Fabric known to a
particular switch." particular switch."
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FamFabricIndex } INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FamFabricIndex }
::= { t11FamTable 1 } ::= { t11FamTable 1 }
T11FamEntry ::= SEQUENCE { T11FamEntry ::= SEQUENCE {
t11FamFabricIndex FabricIndex, t11FamFabricIndex T11FabricIndex,
t11FamConfigDomainId FcDomainIdOrZero, t11FamConfigDomainId FcDomainIdOrZero,
t11FamConfigDomainIdType INTEGER, t11FamConfigDomainIdType INTEGER,
t11FamAutoReconfigure TruthValue, t11FamAutoReconfigure TruthValue,
t11FamContiguousAllocation TruthValue, t11FamContiguousAllocation TruthValue,
t11FamPriority T11FamDomainPriority, t11FamPriority T11FamDomainPriority,
t11FamPrincipalSwitchWwn FcNameIdOrZero, t11FamPrincipalSwitchWwn FcNameIdOrZero,
t11FamLocalSwitchWwn FcNameIdOrZero, t11FamLocalSwitchWwn FcNameIdOrZero,
t11FamAssignedAreaIdList OCTET STRING, t11FamAssignedAreaIdList OCTET STRING,
t11FamGrantedFcIds Counter32, t11FamGrantedFcIds Counter32,
t11FamRecoveredFcIds Counter32, t11FamRecoveredFcIds Counter32,
skipping to change at page 14, line 5 skipping to change at page 15, line 24
t11FamRunningPriority T11FamDomainPriority, t11FamRunningPriority T11FamDomainPriority,
t11FamPrincSwRunningPriority T11FamDomainPriority, t11FamPrincSwRunningPriority T11FamDomainPriority,
t11FamState T11FamState, t11FamState T11FamState,
t11FamPrincipalSwitchSelections Counter32, t11FamPrincipalSwitchSelections Counter32,
t11FamBuildFabrics Counter32, t11FamBuildFabrics Counter32,
t11FamFabricReconfigures Counter32, t11FamFabricReconfigures Counter32,
t11FamDomainId FcDomainIdOrZero, t11FamDomainId FcDomainIdOrZero,
t11FamLocalPrincipalSwitchSlctns Counter32, t11FamLocalPrincipalSwitchSlctns Counter32,
t11FamSticky TruthValue, t11FamSticky TruthValue,
t11FamRestart INTEGER, t11FamRestart INTEGER,
t11FamRcFabricNotifyEnable TruthValue t11FamRcFabricNotifyEnable TruthValue,
t11FamEnable TruthValue,
t11FamFabricName FcNameIdOrZero
} }
t11FamFabricIndex OBJECT-TYPE t11FamFabricIndex OBJECT-TYPE
SYNTAX FabricIndex SYNTAX T11FabricIndex
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A unique index value which uniquely identifies a "A unique index value which uniquely identifies a
particular Fabric known to a particular switch. particular Fabric known to a particular switch.
In a Fabric conformant to SW-3, only a single Fabric In a Fabric conformant to SW-3, only a single Fabric
can operate within a physical infrastructure, and thus, can operate within a physical infrastructure, and thus,
the value of this Fabric Index will always be 1. the value of this Fabric Index will always be 1.
However, it is possible that future standards will define However, forthcoming standards (e.g., FC-SW-4), will likely
how multiple Fabrics, each with its own management define how multiple Fabrics, each with its own management
instrumentation, could operate within one (or more) physical instrumentation, could operate within one (or more)
infrastructures. To allow for this future possibility, this physical infrastructures. To allow for such multiple
index value is used to uniquely identify a particular fabrics, this index value is used to uniquely identify a
Fabric within a physical infrastructure." particular Fabric within a physical infrastructure."
::= { t11FamEntry 1 } ::= { t11FamEntry 1 }
t11FamConfigDomainId OBJECT-TYPE t11FamConfigDomainId OBJECT-TYPE
SYNTAX FcDomainIdOrZero SYNTAX FcDomainIdOrZero
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The configured Domain_ID of the particular switch on this "The configured Domain_ID of the particular switch on this
Fabric, or zero if no Domain_ID has been configured. Fabric, or zero if no Domain_ID has been configured.
The meaning of this object depends on The meaning of this object depends on
t11FamConfigDomainIdType object. t11FamConfigDomainIdType object.
If t11FamConfigDomainIdType is 'preferred', then Domain_ID If t11FamConfigDomainIdType is 'preferred', then the
configured is called 'preferred Domain_ID'. The valid configured Domain_ID is called the 'preferred Domain_ID'.
values are between 0 and 239. In a situation where Valid values are between 0 and 239. In a situation where
this domain could not be assigned, any other Domain_ID this Domain_ID can not be assigned, any other Domain_ID
would be acceptable. The value '0' means any Domain_ID. will be acceptable. A value of zero means any Domain_ID.
If t11FamConfigDomainIdType is 'static', then Domain_ID is If t11FamConfigDomainIdType is 'insistent', then the
called 'static Domain_ID' and valid values are between configured Domain_ID is called the 'insistent Domain_ID' and
1 and 239. In a situation where this domain was valid values are between 1 and 239. In a situation where
non-zero but could not be assigned, no other Domain_ID this Domain_ID can not be assigned, no other Domain_ID is
would be acceptable. acceptable.
The switch sends an RDI (Request Domain_ID) to request this In both of the above cases, the switch sends an RDI (Request
Domain_ID. If a Domain_ID is not able to be granted in the Domain_ID) to request this Domain_ID to the Principal
case of 'preferred', or if a 'static' Domain_ID is Switch. If no Domain_ID is able to be granted in the case
configured but not able to be granted, then it is an error of 'preferred', or if an 'insistent' Domain_ID is configured
condition. When this error occurs, the switch will continue but not able to be granted, then it is an error condition.
as if it receives a SW_RJT with a reason/explanation of: When this error occurs, the switch will continue as if it
'Unable to perform command request'/'Domain_ID not available'. receives a SW_RJT with a reason/explanation of 'Unable to
That is, its E_Ports on that Fabric will be isolated and the perform command request'/'Domain_ID not available'. That
is, its E_Ports on that Fabric will be isolated and the
administrator informed via a 't11FamDomainIdNotAssigned' administrator informed via a 't11FamDomainIdNotAssigned'
notification." notification.
If t11FamConfigDomainIdType is 'static', then the configured
Domain_ID is called the 'static Domain_ID' and valid values
are between 1 and 239. In this situation, there is no
Principal Switch in the Fabric and the Domain_ID is simply
assigned by configuration, together with the Fabric_Name.
A switch configured with a static Domain_ID, on receiving
an EFP, BF, RCF, DIA or RDI SW_ILS shall reply with an
SW_RJT having Reason Code Explanation 'E_Port is Isolated'
and shall isolate the receiving E_Port."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
Rev 7.1, October 2004, section 7."
DEFVAL { 0 } DEFVAL { 0 }
::= { t11FamEntry 2 } ::= { t11FamEntry 2 }
t11FamConfigDomainIdType OBJECT-TYPE t11FamConfigDomainIdType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
static (1), preferred(1),
preferred(2) insistent(2),
static(3)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Type of configured Domain_ID." "Type of configured Domain_ID contained in
t11FamConfigDomainId."
DEFVAL { preferred } DEFVAL { preferred }
::= { t11FamEntry 3 } ::= { t11FamEntry 3 }
t11FamAutoReconfigure OBJECT-TYPE t11FamAutoReconfigure OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object determines how a particular switch "This object determines how a particular switch
responds to certain error conditions. responds to certain error conditions.
skipping to change at page 18, line 16 skipping to change at page 20, line 8
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Fibre Channel Address Identifiers that are "The number of Fibre Channel Address Identifiers that are
currently unassigned on this Fabric and could be available currently unassigned on this Fabric and could be available
for assignment either immediately or at some later time. for assignment either immediately or at some later time.
The sum of the instances of FreeFcIds and AssignedFcIds The sum of the instances of FreeFcIds and AssignedFcIds
corresponding to a particular Fabric is the total number of corresponding to a particular Fabric is the total number of
Fibre Channel Address Identifiers that the local Fabric Fibre Channel Address Identifiers that the local Fabric Address
Address Management is capable of assigning on that Fabric." Management is capable of assigning on that Fabric."
::= { t11FamEntry 12 } ::= { t11FamEntry 12 }
t11FamAssignedFcIds OBJECT-TYPE t11FamAssignedFcIds OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Fibre Channel Address Identifiers that are "The number of Fibre Channel Address Identifiers that are
currently assigned on this Fabric. currently assigned on this Fabric.
The sum of the instances of FreeFcIds and AssignedFcIds The sum of the instances of FreeFcIds and AssignedFcIds
corresponding to a particular Fabric is the total number of corresponding to a particular Fabric is the total number of
Fibre Channel Address Identifiers that the local Fabric Fibre Channel Address Identifiers that the local Fabric Address
Address Management is capable of assigning on that Fabric." Management is capable of assigning on that Fabric."
::= { t11FamEntry 13 } ::= { t11FamEntry 13 }
t11FamAvailableFcIds OBJECT-TYPE t11FamAvailableFcIds OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Fibre Channel Address Identifiers that are "The number of Fibre Channel Address Identifiers that are
unassigned and currently available for immediate assignment unassigned and currently available for immediate assignment
on the Fabric, e.g., with the 'Clean Address' bit set to 1." on the Fabric, e.g., with the 'Clean Address' bit set to 1."
skipping to change at page 21, line 22 skipping to change at page 23, line 15
If this object is set to 'disruptive', then a RCF If this object is set to 'disruptive', then a RCF
(ReConfigure Fabric) is generated in the Fabric (ReConfigure Fabric) is generated in the Fabric
in order for the fabric to recover from the errors. in order for the fabric to recover from the errors.
If this object is set to 'nonDisruptive', then a If this object is set to 'nonDisruptive', then a
BF (Build Fabric) is generated in the Fabric. BF (Build Fabric) is generated in the Fabric.
No action is taken if this object is set to 'noOp'. No action is taken if this object is set to 'noOp'.
The value of the object when read is always 'noOp'." The value of the object when read is always 'noOp'."
REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3), REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
ANSI INCITS 384-2004, June 2004, section 7.3." ANSI INCITS 384-2004, section 7.3."
::= { t11FamEntry 24 } ::= { t11FamEntry 24 }
t11FamRcFabricNotifyEnable OBJECT-TYPE t11FamRcFabricNotifyEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An indication of whether or not a particular switch "An indication of whether or not a particular switch
should issue a t11FamFabricChangeNotify notification on should issue a t11FamFabricChangeNotify notification on
sending or receiving ReConfigureFabric (RCF) on a Fabric. sending or receiving ReConfigureFabric (RCF) on a Fabric.
skipping to change at page 21, line 45 skipping to change at page 23, line 38
notification is generated. If the value is 'false', notification is generated. If the value is 'false',
notification is not generated. notification is not generated.
If an implementation requires all fabrics to have the If an implementation requires all fabrics to have the
same value, then setting one instance of this object same value, then setting one instance of this object
to a new object will result in all corresponding to a new object will result in all corresponding
instances being set to that same new value." instances being set to that same new value."
DEFVAL { false } DEFVAL { false }
::= { t11FamEntry 25 } ::= { t11FamEntry 25 }
t11FamEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the Fabric Address Manager on this switch
on this Fabric.
If enabled on a Fabric, the switch will participate in
principal switch selection, and Domain_IDs are assigned
dynamically. If disabled, the switch will not participate
in principal switch selection, and Domain_IDs are
assigned statically. Thus, the corresponding value of
t11FamConfigDomainIdType needs to be 'static'."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
Rev 7.1, October 2004, sections 7.1 and 7.3."
DEFVAL { true }
::= { t11FamEntry 26 }
t11FamFabricName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WWN that is configured on this switch to be used as
the name of this Fabric when the value of t11FamEnable is
'false'.
If the value of t11FamEnable is 'true', this value is not
used.
Fibre Channel requires that:
a) all switches in an operational Fabric be
configured with the same Fabric name, and
b) each Fabric have a unique Fabric name.
If either of these is violated, either by switches within a
single Fabric being configured with different Fabric names,
or by multiple Fabrics that share management applications
or interact in other ways having the same Fabric name,
then the behavior of the switches and associated management
functions is not specified by Fibre Channel or Internet
standards."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
Rev 7.1, October 2004, section 7.1."
::= { t11FamEntry 27 }
-- --
-- t11FamIfTable - Interface configuration -- t11FamIfTable - Interface configuration
-- --
t11FamIfTable OBJECT-TYPE t11FamIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FamIfEntry SYNTAX SEQUENCE OF T11FamIfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains those Fabric Address Manager parameters "This table contains those Fabric Address Manager parameters
skipping to change at page 22, line 22 skipping to change at page 25, line 15
by an ifIndex value), per-Fabric (identified by a by an ifIndex value), per-Fabric (identified by a
t11FamFabricIndex value), and per-switch (identified by t11FamFabricIndex value), and per-switch (identified by
values of fcmInstanceIndex and fcmSwitchIndex). values of fcmInstanceIndex and fcmSwitchIndex).
An entry in this table is automatically created when An entry in this table is automatically created when
an E_Port becomes non-isolated on a particular Fabric. an E_Port becomes non-isolated on a particular Fabric.
An entry is deleted automatically from this table if: An entry is deleted automatically from this table if:
a) the corresponding interface is no longer an E_Port (e.g., a) the corresponding interface is no longer an E_Port (e.g.,
a G_Port which is dynamically determined to be an F_Port), a G_Port which is dynamically determined to be an F_Port),
and all configuration parameter(s) have default values; or and all configuration paramater(s) have default values; or
b) the interface identified by ifIndex no longer exists b) the interface identified by ifIndex no longer exists
(e.g., because a line-card is physically removed); or (e.g., because a line-card is physically removed); or
c) the row in the t11FamTable corresponding the fabric c) the row in the t11FamTable corresponding the fabric
identified by t11FamFabricID no longer exists. identified by t11FamFabricID no longer exists.
Creating an entry in this table via t11FamIfRowStatus Creating an entry in this table via t11FamIfRowStatus
provides the means to specify non-default parameter value(s) provides the means to specify non-default parameter value(s)
for an interface at a time when the relevant row in this for an interface at a time when the relevant row in this
table does not exist, i.e., because the interface is either table does not exist, i.e., because the interface is either
down or it is not an E_Port." down or it is not an E_Port."
skipping to change at page 24, line 9 skipping to change at page 26, line 47
t11FamAreaTable OBJECT-TYPE t11FamAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FamAreaEntry SYNTAX SEQUENCE OF T11FamAreaEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains Area assignments per-Fabric by a "This table contains Area assignments per-Fabric by a
switch's Fabric Address Manager. Each octet in switch's Fabric Address Manager. Each octet in
t11FamAssignedAreaList is able to be used to index into t11FamAssignedAreaList is able to be used to index into
this table to find information on each Area." this table to find information on each Area."
REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3), REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
ANSI INCITS 384-2004, June 2004, section 4.8." ANSI INCITS 384-2004, section 4.8."
::= { t11FamInfo 1 } ::= { t11FamInfo 1 }
t11FamAreaEntry OBJECT-TYPE t11FamAreaEntry OBJECT-TYPE
SYNTAX T11FamAreaEntry SYNTAX T11FamAreaEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry gives information on the Area_ID and all "An entry gives information on the Area_ID and all
Port_IDs that have been assigned within an Area for Port_IDs that have been assigned within an Area for
the Fabric identified by t11FamFabricIndex, by the the Fabric identified by t11FamFabricIndex, by the
skipping to change at page 25, line 12 skipping to change at page 28, line 7
octets in ascending order. There could be zero or more octets in ascending order. There could be zero or more
Port_IDs assigned on this Area and Fabric. Port_IDs assigned on this Area and Fabric.
Each octet represents one Port_ID. So, the list containing Each octet represents one Port_ID. So, the list containing
the Port_IDs 23, 45, 235 and 56 would be formatted as the the Port_IDs 23, 45, 235 and 56 would be formatted as the
4-octet string x'172d38eb'." 4-octet string x'172d38eb'."
::= { t11FamAreaEntry 2 } ::= { t11FamAreaEntry 2 }
-- --
-- t11FamDatabaseTable -- t11FamDatabaseTable
-- .
t11FamDatabaseTable OBJECT-TYPE t11FamDatabaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FamDatabaseEntry SYNTAX SEQUENCE OF T11FamDatabaseEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains all information known by the "This table contains all information known by the
a switch about all the domains which have been a switch about all the domains which have been
assigned in each Fabric." assigned in each Fabric."
REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3), REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
ANSI INCITS 384-2004, June 2004, section 4.8." ANSI INCITS 384-2004, section 4.8."
::= { t11FamInfo 2 } ::= { t11FamInfo 2 }
t11FamDatabaseEntry OBJECT-TYPE t11FamDatabaseEntry OBJECT-TYPE
SYNTAX T11FamDatabaseEntry SYNTAX T11FamDatabaseEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the t11FamDatabaseTable "An entry (conceptual row) in the t11FamDatabaseTable
containing information about one Domain_ID in the containing information about one Domain_ID in the
Fabric identified by t11FamFabricIndex, and known by Fabric identified by t11FamFabricIndex, and known by
skipping to change at page 26, line 30 skipping to change at page 29, line 24
-- Fibre Channel Address Identifier cache information -- Fibre Channel Address Identifier cache information
-- --
-- The cached information allows the Fabric Address Manager to -- The cached information allows the Fabric Address Manager to
-- implement the concept of a Preferred Domain_ID, whereby after a port -- implement the concept of a Preferred Domain_ID, whereby after a port
-- releases a Fibre Channel Address Identifier value, a switch makes an -- releases a Fibre Channel Address Identifier value, a switch makes an
-- attempt to re-assign the same Fibre Channel Address Identifier value -- attempt to re-assign the same Fibre Channel Address Identifier value
-- on the next occasion when that port requests an assignment. -- on the next occasion when that port requests an assignment.
-- --
t11FamMaxFcIdCacheSize OBJECT-TYPE t11FamMaxFcIdCacheSize OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295) SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum number of Fibre Channel Address Identifiers "The maximum number of Fibre Channel Address Identifiers
that are able to be cached in the t11FamFcIdCacheTable. that are able to be cached in the t11FamFcIdCacheTable.
If the number is unknown, the value of this object is If the number is unknown, the value of this object is
zero." zero."
::= { t11FamInfo 3 } ::= { t11FamInfo 3 }
-- --
skipping to change at page 28, line 38 skipping to change at page 31, line 33
"The number of Port_IDs in the range all of which were "The number of Port_IDs in the range all of which were
assigned and later released. The range starts with the assigned and later released. The range starts with the
Port_ID contained in the second byte of Port_ID contained in the second byte of
t11FamFcIdCacheAreaIdPortId for the Area_ID contained in the t11FamFcIdCacheAreaIdPortId for the Area_ID contained in the
first byte of object t11FamFcIdCacheAreaIdPortId." first byte of object t11FamFcIdCacheAreaIdPortId."
::= { t11FamFcIdCacheEntry 3 } ::= { t11FamFcIdCacheEntry 3 }
-- Objects for use in notifications -- Objects for use in notifications
t11FamNotifyFabricIndex OBJECT-TYPE t11FamNotifyFabricIndex OBJECT-TYPE
SYNTAX FabricIndex SYNTAX T11FabricIndex
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A unique index value which identifies a particular "A unique index value which identifies a particular
Fabric for which a particular notification is generated. Fabric for which a particular notification is generated.
In a Fabric conformant to SW-3, only a single Fabric In a Fabric conformant to SW-3, only a single Fabric
can operate within a physical infrastructure, and thus, can operate within a physical infrastructure, and thus,
the value of this Fabric Index will always be 1. the value of this Fabric Index will always be 1.
However, it is possible that future standards will define However, forthcoming standards (e.g., FC-SW-4), will likely
how multiple Fabrics, each with its own management define how multiple Fabrics, each with its own management
instrumentation, could operate within a single physical instrumentation, could operate within one (or more)
infrastructure. To allow for this future possibility, this physical infrastructures. To allow for such multiple
value uniquely identifies the Fabric within the physical fabrics, this index value is used to uniquely identify a
infrastructure for which a notification is generated." particular Fabric within a physical infrastructure."
::= { t11FamNotifyControl 2 } ::= { t11FamNotifyControl 1 }
-- Notifications -- Notifications
t11FamDomainIdNotAssignedNotify NOTIFICATION-TYPE t11FamDomainIdNotAssignedNotify NOTIFICATION-TYPE
OBJECTS { t11FamLocalSwitchWwn, t11FamNotifyFabricIndex } OBJECTS { t11FamLocalSwitchWwn, t11FamNotifyFabricIndex }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that a Domain_ID has not "This notification indicates that a Domain_ID has not
been not configured nor assigned for a particular Fabric, been not configured nor assigned for a particular Fabric,
identified by t11FamNotifyFabricIndex, on a particular identified by t11FamNotifyFabricIndex, on a particular
skipping to change at page 32, line 26 skipping to change at page 35, line 20
t11FamPrincipalSwitchSelections, t11FamPrincipalSwitchSelections,
t11FamBuildFabrics, t11FamBuildFabrics,
t11FamFabricReconfigures, t11FamFabricReconfigures,
t11FamDomainId, t11FamDomainId,
t11FamLocalPrincipalSwitchSlctns, t11FamLocalPrincipalSwitchSlctns,
t11FamIfRcfReject, t11FamIfRcfReject,
t11FamIfRole, t11FamIfRole,
t11FamIfRowStatus, t11FamIfRowStatus,
t11FamRcFabricNotifyEnable, t11FamRcFabricNotifyEnable,
t11FamNotifyFabricIndex, t11FamNotifyFabricIndex,
t11FamSticky t11FamSticky,
t11FamEnable,
t11FamFabricName
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of general objects for displaying and "A collection of general objects for displaying and
configuring Fabric Address management." configuring Fabric Address management."
::= { t11FamMIBGroups 1 } ::= { t11FamMIBGroups 1 }
t11FamCommandGroup OBJECT-GROUP t11FamCommandGroup OBJECT-GROUP
OBJECTS { t11FamRestart } OBJECTS { t11FamRestart }
STATUS current STATUS current
skipping to change at page 35, line 25 skipping to change at page 38, line 25
[IF-MIB] [IF-MIB]
McCloghrie, K., and F. Kastenholz, "The Interfaces Group MIB", RFC McCloghrie, K., and F. Kastenholz, "The Interfaces Group MIB", RFC
2863, June 2000. 2863, June 2000.
[FC-MGMT] [FC-MGMT]
K. McCloghrie, "Fibre Channel Management MIB", Internet-Draft K. McCloghrie, "Fibre Channel Management MIB", Internet-Draft
(draft-ietf-ips-fcmgmt-mib-nn.txt), work-in-progress. (draft-ietf-ips-fcmgmt-mib-nn.txt), work-in-progress.
[FC-SW-3] [FC-SW-3]
"Fibre Channel - Switch Fabric - 3 (FC-SW-3)", ANSI INCITS "Fibre Channel - Switch Fabric - 3 (FC-SW-3)", ANSI INCITS
384-2004, May 2004. 384-2004, June 2004. December 2003.
[FC-SW-4]
"Fibre Channel - Switch Fabric - 4 (FC-SW-4)", ANSI NCITS xxx-200x,
T11/Project 1674-D/Rev 7.1, October 2004.
[FC-FS] [FC-FS]
"Fibre Channel - Framing and Signaling (FC-FS)", ANSI INCITS "Fibre Channel - Framing and Signaling (FC-FS)", ANSI INCITS
373-2003, October 2003. 373-2003, April 2003.
10. Informative References 10. Informative References
[RFC2837] [RFC2837]
Teow, K., "Definitions of Managed Objects for the Fabric Element in Teow, K., "Definitions of Managed Objects for the Fabric Element in
Fibre Channel Standard", RFC 2837, May 2000. Fibre Channel Standard", RFC 2837, May 2000.
[RFC3410] [RFC3410]
Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction and Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction and
Applicability Statements for Internet-Standard Management Applicability Statements for Internet-Standard Management
Framework", RFC 3410, December 2002. Framework", RFC 3410, December 2002.
[FC-MI] [FC-MI]
"Fibre Channel - Methodologies for Interconnects (FC-MI)", "Fibre Channel - Methodologies for Interconnects (FC-MI)",
ANSI INCITS TR-30-2002, November 2002. T11/Project 1377-DT/Rev 1.92, December 2001.
11. Security Considerations 11. IANA Considerations
IANA is requested to make the OID assignments for both MIB modules
under the appropriate subtree.
12. Security Considerations
There are a number of management objects defined in this MIB module There are a number of management objects defined in this MIB module
with a MAX-ACCESS clause of read-write and/or read-create. Such with a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on environment without proper protection can have a negative effect on
network operations. These are the tables and objects and their network operations. These are the tables and objects and their
sensitivity/vulnerability: sensitivity/vulnerability:
t11FamConfigDomainId, t11FamConfigDomainIdType and t11FamConfigDomainId, t11FamConfigDomainIdType and
skipping to change at page 37, line 23 skipping to change at page 40, line 28
authentication and privacy). authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
12. Authors' Addresses 13. Authors' Addresses
Claudio DeSanti Claudio DeSanti
Cisco Systems, Inc. Cisco Systems, Inc.
170 West Tasman Drive 170 West Tasman Drive
San Jose, CA 95134 USA San Jose, CA 95134 USA
Phone: +1 408 853-9172 Phone: +1 408 853-9172
EMail: cds@cisco.com EMail: cds@cisco.com
Vinay Gaonkar Vinay Gaonkar
Cisco Systems, Inc. Cisco Systems, Inc.
skipping to change at page 38, line 5 skipping to change at page 41, line 13
Phone: +1 408-526-5260 Phone: +1 408-526-5260
Email: kzm@cisco.com Email: kzm@cisco.com
Silvano Gai Silvano Gai
Cisco Systems, Inc. Cisco Systems, Inc.
170 West Tasman Drive 170 West Tasman Drive
San Jose, CA USA 95134 San Jose, CA USA 95134
Phone: +1 408-526-7269 Phone: +1 408-526-7269
Email: sgai@cisco.com Email: sgai@cisco.com
13. Full Copyright Statement 14. Full Copyright Statement
Copyright (C) The Internet Society (2004). This document is subject Copyright (C) The Internet Society (2005). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights. except as set forth therein, the authors retain all their rights.
Intellectual Property Statement "This document and the information contained herein are provided on
an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE
INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."
15. Disclaimer of validity
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79. found in BCP 78 and BCP 79.
skipping to change at page 38, line 34 skipping to change at page 42, line 6
attempt made to obtain a general license or permission for the use of attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr. http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at this standard. Please address the information to the IETF at
ietf-ipr@ietf.org. ietf-ipr@ietf.org.
Disclaimer of Validity
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgment Acknowledgment
Funding for the RFC Editor function is currently provided by the Funding for the RFC Editor function is currently provided by the
Internet Society. Internet Society.
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/