Network Working Group John G ScudderInternet DraftEngineering Task Force J. Scudder Internet-Draft Juniper Networks Expiration Date: June 2007 ChandraIntended status: Standards Track C. Appanna File name: draft-ietf-idr-bgp-multisession-03.txtExpires: January 13, 2010 Cisco Systems January 2007July 12, 2009 Multisession BGP draft-ietf-idr-bgp-multisession-03.txtdraft-ietf-idr-bgp-multisession-04 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claimsThis Internet-Draft is submitted to IETF in full conformance with the provisions of which heBCP 78 and BCP 79. This document may contain material from IETF Documents or she is aware have beenIETF Contributions published or willmade publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be disclosed,modified outside the IETF Standards Process, and anyderivative works of which he or she becomes aware willit may not be disclosed, in accordance with Section 6 of BCP 79.created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/1id-abstracts.htmlhttp://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.htmlhttp://www.ietf.org/shadow.html. This Internet-Draft will expire on January 13, 2010. Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Abstract This specification augments "Multiprotocol Extensions for BGP-4" [MP- BGP](MP- BGP) by proposing a mechanism to allowfacilitate the use of multiple sessions to be usedbetween a given pair of BGP speakers. Each session is used to transport routes for one or morerelated by some session-based attribute such as AFI/SAFI. This provides an alternative to the current [MP-BGP]MP-BGP approach of multiplexing routes forall AFI/SAFIroutes onto a single connection. Use of this approach is expected to increase the robustness ofprovide finer-grained fault management and isolation as the BGP protocol as itis used to support more and more diverse AFI/SAFI.services. Table of Contents 1. Introduction Most. . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. Requirements Language . . . . . . . . . . . . . . . . . . 5 2. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. Use of BGP [BGP, BGP-DRAFT] implementations only permitCapability Advertisement . . . . . . . . . . . . . 6 4. New NOTIFICATION Subcodes . . . . . . . . . . . . . . . . . . 7 5. Overview of Operation . . . . . . . . . . . . . . . . . . . . 8 5.1. Using Multisession . . . . . . . . . . . . . . . . . . . . 9 5.1.1. Initiating Connections . . . . . . . . . . . . . . . . 9 184.108.40.206. Continuing a single ESTABLISHED connectionRedirected Connection . . . . . . . . 11 5.1.2. Accepting Connections . . . . . . . . . . . . . . . . 11 5.1.3. Collision Detection, Graceful Restart . . . . . . . . 12 6. Backward Compatibility . . . . . . . . . . . . . . . . . . . . 12 7. State Machine . . . . . . . . . . . . . . . . . . . . . . . . 13 7.1. Modifications to exist with each peer. More precisely, they only permit a single ESTABLISHED connection for any given pair of IPConnect State and Active State . . . . . 13 7.2. Addition of WaitForOpen State, Deletion of OpenSent State . . . . . . . . . . . . . . . . . . . . . . . . . . 14 8. Discussion . . . . . . . . . . . . . . . . . . . . . . . . . . 14 9. Security Considerations . . . . . . . . . . . . . . . . . . . 14 10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 15 11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 15 12. References . . . . . . . . . . . . . . . . . . . . . . . . . . 15 12.1. Normative References . . . . . . . . . . . . . . . . . . . 15 12.2. Informative References . . . . . . . . . . . . . . . . . . 16 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 16 1. Introduction Most BGP [RFC4271] implementations only permit a single ESTABLISHED connection to exist with each peer. More precisely, they only permit a single ESTABLISHED connection for any given pair of IP endpoints. BGP Capabilities [RFC5492] extend BGP to allow diverse information (encoded as "capabilities") to be associated with a session. In some cases, a capability may relate to the operation of the protocol machinery; an example is Route Refresh [RFC2918]. However, in other cases a capability may relate specifically to some common distinguishing characteristic of the routes carried over the session; an example is Multiprotocol BGP [RFC4760]. Multiprotocol BGP [MP-BGP][RFC4760] extends BGP to allow information for multiple NLRI families and sub-families to be transported in BGP. Routes for different families are distinguished by AFI and SAFI. Routes for different families are commonly multiplexed onto a single BGP session. A common criticism of BGP is the fact that most malformed messages cause the session to be terminated. While this behavior is necessary for protocol correctness, one may observe that the protocol machinery of a given implementation may only be defective with respect to a given AFI/SAFI. Thus, it would be desirable to allow the session related to that family to be terminated while leaving other AFI/SAFI unaffected. As BGP is commonly deployed, this is not possible. A second criticism of BGP is that it is difficult or in some cases impossible to manage control plane resource contention when BGP is used to support diverse services over a single session. In contrast, if a single BGP session carries only information for a single service (or related set of services) it may be easier to manage such contention. In this specification, we propose a mechanism by which multiple transport sessions may be established between a pair of peers. Each transport session can be used for one or more AFI/SAFI. While AFI/SAFI based sessions is one way to group data being exchanged between BGP peers it is also possible to concieve of sessions being based on other characteristics of the BGP data. In this draft we also propose a scheme for creating multiple BGP sessions between BGP peers based on criteria other than AFI/SAFI. However, the definition of specific criteria for grouping exchanged data into sessions is beyond the scope of this proposal. The goal of this proposalis to provideidentified by a mechanism for doing that if such criteria is available. For easedistinct set of understandability and readability, AFI/SAFI will be used as an illustrative grouping criteria through outBGP capabilities, notably the document.MP-BGP capability. Each session is distinct from a BGP protocol point of view; an error or other event on one session has no implications for any other session. All protocol modifications proposed by this specification take place during the OPEN exchange phase of the session, there are no modifications to the operation of the protocol once a session reaches ESTABLISHED state. Routers implementingAlthough AFI/SAFI is perhaps the most obvious way to group sets of routes being exchanged between BGP peers, sessions can also be distinguished by other BGP capabilities. In general, any capability used in this fashion would be expected to have semantics of identifying some common distinguishing characteristic of a set of routes, just as AFI/SAFI does; however, specifics are beyond the scope of this document. For the sake of clarity, we generally use the MP-BGP capability (or interchangeably, AFI/SAFI) in this document. Such use is illustrative and is not intended to be limiting. Routers implementing this specification MUST also implement the base criteria that is used to define sessions. For example if AFI/SAFI based sessions are desired then peersrouters implementing this specification MUST also implement [MP-BGP].MP-BGP [RFC4760]. 1.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. 2. Definitions "MP-BGP capability" refers to the capability [BGP-CAP][RFC5492] with code 1, specified in [MP-BGP]MP-BGP [RFC4760] section 10.8. A BGP speaker is said to "support" some feature or functionality (for example, to support this specification, or to support a particular AFI/SAFI) when the BGP implementation supports the feature AND the feature has not been disabled by configuration. The Session Identifier is a capability or group of capabilities that will be used to differentiate individual BGP sessions between two IP endpoints. When the AFI/SAFI is used to distinguish sessions, the MP-BGP capability is the session identifier. In this document the MP-BGP capability is used as a Session Identifier for illustrative and explanatory purpose, i.e as the capability whose values differentiates the multiple session between two IP endpoints. MP-BGP and AFI/SAFI can be replaced by any other capability and the values of that capability to setup multiple sessions, without any modifications to the procedures described.A pair of session indentifiersidentifiers are said to conflict when considering the two groupsthem as two sets, there is an intersection between the groupsthem either in the capabilities or the values incontained within the capabilities, but neither session groupis a subset of the other. For example, a pair of AFI/SAFIMP-BGP capabilities is said to "conflict" when considering the two groupsthem as two sets,sets (of AFI/SAFI values), there is an intersection between the groupssets but neither groupset is a subset of the other. A BGP speaker is said to be the "active" speaker for a given connection if it was the party that initiated the transport open. The active speaker's transport endpoint will typically use an ephemeral port number. A BGP speaker is said to be the "passive" speaker for a given connection if it was the party that received the transport open. The passive speaker's transport endpoint typically uses the well-known BGP port number, 179, but this document introduces an exception detailed in Section 220.127.116.11. 3. Use of BGP Capability Advertisement This specification defines the Multisession capability [BGP-CAP]:[RFC5492]: Capability code (1 octet): TBD68 Capability length (1 octet): variable Capability value (1 octet): Flags followed by the list of capabilities that define a session. 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 +-+-+-+-+-+-+-+-+ |G||G|R| Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Port number (if R is set) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | One or more list ofCapability codes (1 octet each) | ~ ~ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The most significant bit is defined as the Grouping Support (G) bit. It can be used to indicate support for the ability to group multiple capabiltycapability values into one session. When set (value 1) this bit indicates that the BGP speaker supports grouping. The remaining bits are reserved, and should be setAn example of grouping is if a BGP speaker wishes to zerouse one session for AFI/SAFI values 1/1, 1/2 and 1/4, and another for AFI/SAFI values 2/1, 2/2 and 2/4. The next bit is defined as the Redirect (R) bit. When set, it indicates that the sender wishes to continue the current BGP session using a different transport endpoint. This entails the active speaker dropping the current session and starting a fresh one using the proposed endpoint; this is detailed in Section 18.104.22.168 below. When set, the transport endpoint information is encoded in the port number field of the capability as detailed below. The remaining bits are reserved, and should be set to zero by the sender and ignored by the receiver. If the R bit is set, following the reserved bits is the two-octet TCP port number to which the passive speaker wishes to redirect the session. Following the reserved bits and the transport endpoint information if present is a list of one or more Capability codes defined in BGP. The size of the list is inferred from the length of the overall capability; it is the capability length minus one if the R bit is not set, or minus three if the R bit is set. The capabilities listed here representspecify which capabilities in the session identifier for sessions betweenOPEN message comprise the BGP speakers.session identifier. The Multisession capability code itself MUST NOT be listed; if listed it MUST be ignored upon receipt. For exampleexample, peers wishing to establish sessions based on AFI/SAFI would exchange the Multiprotocol Extensions capability code (1) only in the list. In this case the Multisession capability would have a length of 2 octets.two octets, or four octets if redirect is being requested. 4. New NOTIFICATION Subcodes [BGP, BGP-DRAFT]BGP [RFC4271] Section 4.5 provides a number of subcodes to the NOTIFICATION message, and Section 6.2 elaborates on the use of those subcodes. This specification introduces twofive new subcodes: OPEN Message Error subcodes: 7 - No SupportedCapability Value.Value Mismatch 8 - Grouping Conflict 9 - Grouping Required 10 - Redirecting Now 11 - Redirect Required The No SupportedCapability Value Mismatch code MAY be used when an OPEN message received contains one or more capabilities, nonecapabilities whose values are inconsistent with the corresponding capabilities of which list an capability supported bythe local BGP speaker. It is observed that this subcode may be useful for BGP speakers in general, even if they do not (otherwise) implement this specification.The Data field MUST list the offending capability code(s). The Grouping Conflict code MAY be used when an OPEN message contains severalone or more capabilities whose values conflict with the values of one or more capability groups configured on the local BGP speaker. The Data field SHOULDMUST indicate one of the conflicting locally-configured capability groups,group, encoded as thehthe appropriate capabilities. The Grouping Required code MAY be used when a BGP speaker whichthat is configured to require grouping attempts to establish a connection with a BGP speaker whichthat does not support grouping. (While it is true that it might be possible to communicate much the same information using the Unsupported Capability NOTIFICATION message, this more explicit method is felt to be more transparent.) If the MP-BGP capability is used as the session identifier, the notification codesnotifications could be used as follows: The No SupportedCapability Value codeMismatch MAY be used when an OPEN message contains one or more MP-BGP capabilities, none of which listlists an AFI/SAFI supported by the local BGP speaker. It is observed that this subcode may be useful for MP-BGP speakers in general, even if they do not (otherwise) implement this specification. The Grouping Conflict code MAY be used when an OPEN message contains several MP-BGP capabilities whose AFI/SAFI conflict with one or more AFI/SAFI groups configured on the local BGP speaker. The Data field SHOULDMUST indicate one of the conflicting locally-configured AFI/SAFI groups, encoded as MP-BGP capabilities. The Grouping Required code MAY be used when a BGP speaker which is configured to require grouping attempts to establish a connection with a BGP speaker which does not support grouping. (While it is true that it(One might be possiblethink of this as indicating "I'm not willing to communicate much the same information usingcombine AFI/SAFI foo and bar as you've tried to do.") Use of the Unsupported Capability NOTIFICATION message, this more explicit methodRedirecting Now and Redirect Required codes is felt to be more transparent.)detailed in Section 22.214.171.124. The use of these subcodes is further elaborated below. 5. Overview of Operation The operation section is divided into two main subsections. The "Using Multisession" sections below discuss the BGP speaker's behavior when the peer does support this specification or is assumed to. The "Backward Compatibility" section discusses the BGP speaker's behavior when the peer does not support this specification, or is assumed not to. Both sections also discuss how to switch to the other mode. A BGP speaker whichthat supports this specification SHOULDMUST always advertise the Multisession capability, regardless of its peer's known or presumed capability set. In all cases until a BGP speaker has initiated or accepted one connection from a given peer, it is unknown whether the peer supports this specification or not. Two strategies can be considered for making this initial determination -- either the BGP speaker can initially assume that the peer does not support this specification, and switch modes if it is discovered that it does, or vice-versa. Either approach is acceptable. Again for illustration,As discussed previously, this section 5.0describes the operation from the point of view of the MP-BGP capability and the associated AFI/SAFIAFI/ SAFI values as the session identifier. It can be replaced with any other capability or groups of capabiltiescapabilities without any changes to the behaviourbehavior described below. Note that if a BGP speaker only wishes to support a single AFI/SAFI in its communications with a given peer only one session is needed in any case, and so the "multisession" feature is moot. In such a case the behavior required would be indistinguishable from that given in the "backward compatibility" section below. In the illustrative examples in the following sections, it is generally assumed that a BGP speaker does wish to support multiple AFI/SAFI in its communications with a given peer. 5.1. Using Multisession:Multisession The following subsections discuss a BGP speaker's behavior towards a peer whichthat is known or assumed to support this specification. 5.1.1. Initiating Connections:Connections When a BGP speaker (the "active" speaker) attempts BGP communication with its peer,peer (the "passive" speaker), it initiates one connection per group of AFI/SAFI it wishes to support. (This implies that a new local TCP port will be allocated for each new connection.) The OPEN sent on each connection MUST include the Multisession capability and one or more MP-BGP capabilities indicating the AFI/SAFI to be supported on that session. If a non- trivialnon-trivial group of AFI/SAFI (i.e., a group of two or more) is proposed, the BGP speaker MUST also set the G bit of the Multisession capability. Even if a trivial group of AFI/SAFI is proposed, the G bit SHOULD be set if grouping is supported. The active speaker MUST NOT set the R bit nor include an associated TCP port number. Note that any "group of AFI/SAFI" may be a singleton group, i.e. the speaker may wish to use a separate BGP connection for each AFI/SAFI. If the peer also supports this specification and also wishes to support the AFI/SAFI in question, it will respond with an OPEN whichthat includes the Multisession capability and the AFI/SAFI included in the active speaker's OPEN. If the active speaker's OPEN included a non- trivial group of AFI/SAFI whichthat the peer supports, then the peer's Multisession capability will have the G bit set. If the peer also supports this specification and wishes to support some but not all of the AFI/SAFI in question, it will respond with an OPEN whichthat includes the Multisession capability and a subset of AFI/SAFIAFI/ SAFI included in the active speaker's OPEN. The reason for listing only a subset may be because some of the AFI/SAFI are simply not supported, or because the peer does not wish to support the AFI/SAFI as a group (i.e. it may be configured to use a smaller group). In this case, the BGP speaker MAY consider the set of AFI/SAFI whichthat were not included in the peer's OPEN to form a new group, and MAY try to initiate a new session using that group. If the peer also supports this specification but does not support grouping, and a non-trivial group of AFI/SAFI has been proposed, then it will respond as given in the previous paragraph but with the additional proviso that the G bit will be clear. In this case, the BGP speaker MAY accept the connection as given in the previous paragraph, or it MAY reply with a NOTIFICATION message with ERROR Code OPEN Message Error and Error Subcode Grouping Required, and the connection will be closed. If the peer wishes to continue the BGP connection on a different transport endpoint, in addition to responding as detailed above, it will set the R bit and will include the TCP port number that should be used to continue the connection. See Section 126.96.36.199 for details regarding how this is handled. If the peer does not wish to support the AFI/SAFI in question, it will reply with a NOTIFICATION message with Error Code OPEN Message Error, and Error Subcode No SupportedCapability value,Value Mismatch, and the connection will be closed. A BGP speaker SHOULDMUST NOT attempt to initiate connections for any AFI/SAFIAFI/ SAFI for which a connection already exists. If the peer does not support this specification, it will respond with an OPEN whichthat does not include the Multisession capability. In this case the connection SHOULD be terminated, and future connections to the peer should be attempted in the "backward compatibility" mode discussed below. 5.1.2. Accepting Connections: When processingin Section 6. 188.8.131.52. Continuing a connection attempt,Redirected Connection When the BGPactive speaker MUST wait until the peer'sreceives an OPEN message has been received before proceeding. This is at variancefrom the passive speaker that includes transport redirect information, it MUST reply with an Open Message Error NOTIFICATION with its subcode set to Redirecting Now and close the behavior specified insession. Subsequently, it MUST attempt to initiate a new session using the finite state machine (FSM) of [BGP-DRAFT], but is interoperable withtransport endpoint that FSM. The FSM changes are specified in a later section. Oncethe peer's OPEN messagepassive speaker has been received, if it includesproposed in lieu of the Multisession capability andoriginal one or more MP-BGP capabilities indicating a group of AFI/SAFI which(which typically would have been the well-known BGP port, 179). The new session should proceed exactly as the original one did; that is, the active speaker SHOULD send an OPEN with the same content, and can expect to receive from the passive speaker an OPEN with the same content as previously with the exception that the R bit should be clear and no associated port number should be present. If the R bit is not clear it (and the accompanying port number) SHOULD be disregarded. Note that although the OPEN messages exchanged on the reinitiated session can be expected to be the same as or similar to those from the previous session as discussed above, an implementation MUST NOT rely on or enforce this assumption when handling the received OPEN. The new session MUST be handled as any other new session would be in this respect. As discussed above, when the passive speaker requests a redirect, the active speaker is expected to drop the current session and initiate a new one. If it does not do so, the passive speaker MAY elect to continue the session, or it MAY elect to terminate the session by sending a Redirect Required NOTIFICATION. 5.1.2. Accepting Connections When processing a connection attempt, the BGP speaker MUST wait until the peer's OPEN message has been received before proceeding. This is at variance with the behavior specified in the finite state machine (FSM) of [RFC4271], but is interoperable with that FSM. The FSM changes are specified in Section 7. Once the peer's OPEN message has been received, if it includes the Multisession capability and one or more MP-BGP capabilities indicating a group of AFI/SAFI that the BGP speaker wishes to support, then the BGP speaker responds with an OPEN message whichthat includes the Multisession capability and one or more MP-BGP capabilities indicating the same AFI/SAFI. If the OPEN includes the Multisession capability and one or more MP- BGP capabilities indicating a group of AFI/SAFI whichthat conflicts with an AFI/SAFI grouping that has been configured on the BGP speaker then the BGP speaker MAY reply with an OPEN listing a set of AFI/SAFI whichthat intersect with those proposed by the peer (in effect overriding the locally configured set) or it MAY close the connection with a NOTIFICATION message with Error Code OPEN Message Error and Error Subcode Grouping Conflict. The former behavior is suggested as the default if grouping is supported. If the BGP speaker does not support AFI/SAFI grouping it MAY reply with an OPEN listing one of the AFI/SAFI out of those proposed by the peer. It SHOULDMUST also set the G bit in the Multisession capability to zero. If the received OPEN message does not include any MP-BGP capability indicating an AFI/SAFI the BGPpassive speaker wishes to support, it shouldcontinue the session for this particular grouping on a different port number, it sets the R bit in its OPEN and includes the TCP port number on which it will continue the session. The passive speaker MUST be prepared to accept a connection on the given port immediately following transmission of its OPEN. If the received OPEN message does not include any MP-BGP capability indicating an AFI/SAFI the BGP speaker wishes to support, it SHOULD close the connection with a NOTIFICATION message with Error Code OPEN Message Error and Error Subcode No SupportedCapability Value.Value Mismatch. If the received OPEN message does not include the Multisession capability, then the peer does not support this specification. The connection MAY be continued in the "backward compatibility" mode discussed below,in Section 6, or it MAY be terminated and future connections to the peer attempted in the "backward compatibility" mode. 5.1.3. Collision Detection, Graceful Restart: [BGP, BGP-DRAFT]Restart [RFC4271] Section 6.8 (BGP connection collision detection) considers a pair of connections to have collided if the source and destination IP addresses of both connections match. With respect to peers whichthat support this specification, the AFI/SAFI groups associated with the connections must also intersect for them to be considered to have collided. This consideration also applies to Section 6.24.2 of [BGP-GR],BGP Graceful Restart [RFC4724], when determining whether a new connection should be considered equivalent to a reset of a previous TCP session. 5.2.6. Backward Compatibility:Compatibility This subsection discusses a BGP speaker's behavior towards a peer whichthat is known or assumed not to support this specification. In short, the BGP speaker's behavior towards such a peer should be as otherwise defined for the BGP protocol, according to [BGP, BGP-DRAFT][RFC4271] and any other extension supported by the BGP speaker. As previously mentioned, the BGP speaker SHOULD always advertise the Multisession capability in its OPEN message, even towards "backward compatibility" peers. If, in opening a BGP connection with such a peer, an OPEN whichthat includes the Multisession capability is received from the peer, then the peer SHOULD be changed to "multisession" mode. How this is done depends on whether the BGP speaker has already sent an OPEN or not -- If the BGP speaker has not yet sent an OPEN to the peer, then the connection MAY be continued in the "multisession" mode discussed above, or it MAY be terminated and future connections to the peer attempted in "multisession" mode. If the BGP speaker has sent an OPEN to the peer, then the current session SHOULD be terminated and future connections to the peer attempted in "multisession" mode. Use of techniques such as [BGP-DYN-CAP]dynamic capabilities [I-D.ietf-idr-dynamic-cap] for on-the-fly switching of session modes areis beyond the scope of this document. 6.7. State Machine As mentioned under "accepting connections" above, this specification modifies the BGP finite state machine, albeit in a backward- compatible fashion. In addition, note that one state machine is considered to exist for each of the connections whichthat may exist to a given peer. This implies that, for example, any session flap dampening that may exist is performed per session indetifier.identifier. The specific state machine modifications to [BGP-DRAFT][RFC4271] Section 8.2.2 are as follows. 184.108.40.206. Modifications to Connect State and Active State In the actions in response to the events Open Delay timer expires [Event 12] and TCP connection succeeds [Event 16 or Event 17], an OPEN is not sent and the state changes to WaitForOpen and not to OpenSent. 220.127.116.11. Addition of WaitForOpen State, Deletion of OpenSent State The WaitForOpen state is the same in all respects to OpenSent, except for the action in response to reception of a valid OPEN message [Event 19]. In that event, the local system sends an OPEN message prior to sending a KEEPALIVE message. The OpenSent state is deleted. All references to OpenSent are replaced by references to WaitForOpen. 7.8. Discussion Note that many BGP implementations already permit multiple sessions to be used between a given pair of routers, typically by configuring multiple IP addresses on each router and configuring each session to be bound to a different IP address. The principal contribution of this specification is to allow multiple sessions to be created automatically, without additional configuration overhead or address consumption. The specification supports the simple case of one capability being used as the session identifier and one connection per session identifier value. It also permits connections be established based on themultiple capabiltiescapabilities as a sessiosession identifier with multiple values per capability grouped together per connection. In the context of MP-BGP based connections, which we believe may be the most prevalent use of this specificationspecification, it permits supporting one AFI/SAFI per connection, and also permits arbitrary grouping of AFI/SAFI onto BGP connections. For such grouping to function pleasingly, both peers participating in a connection need to agree on what AFI/SAFI groupings will be used. If conflicting groupings are configured, the connections may not establish, or more connections may be established than were expected (in the degenerate case, one connection per AFI/SAFI could be established despite configured groupings). We observe that the potential for misbehavior in the presence of conflicting configuration is not unusual in BGP, and that support for, and configuration of grouping is purely optional. 8. Acknowledgements To be supplied.9. References [BGP4] Rekhter, Y.Security Considerations The ability to redirect to a port other than the well-known BGP port implies that a legitimate BGP session may exist for which neither port is equal to 179. This may have implications for firewall filters used to protect the control processor. In other respects, this document does not change the BGP security model. 10. Acknowledgements The authors would like to thank Pedro Marques, Keyur Patel, Robert Raszuk, Yakov Rekhter and T. Li, "A Border Gateway Protocol 4 (BGP-4),"David Ward for their valuable comments. 11. IANA Considerations IANA has allocated BGP Capability Code 68 as the Multisession BGP Capability. This document requests IANA to allocate five new OPEN Message Error subcodes: 7 - Capability Value Mismatch 8 - Grouping Conflict 9 - Grouping Required 10 - Redirecting Now 11 - Redirect Required 12. References 12.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 1771,2119, March 1995. [BGP-DRAFT]1997. [RFC4271] Rekhter, Y., T. LiLi, T., and S. Hares, "A Border Gateway Protocol 4 (BGP-4)," Work in Progress (draft-ietf-idr-bgp4-20), April 2003. [MP-BGP] Bates, T., R. Chandra, D. Katz, Y. Rekhter, "Multiprotocol Exten- sions for BGP-4," Work in Progress (draft-ietf-idr-rfc2858bis-03), July 2003. [BGP-GR](BGP-4)", RFC 4271, January 2006. [RFC4724] Sangli, S., Y. Rekhter, R.Chen, E., Fernando, J.R., Scudder, E. Chen,J., and Y. Rekhter, "Graceful Restart Mechanism for BGP," Work in Progress (draft-ietf-idr- restart-06),BGP", RFC 4724, January 2003. [BGP-CAP]2007. [RFC4760] Bates, T., Chandra, R., J.Katz, D., and Y. Rekhter, "Multiprotocol Extensions for BGP-4", RFC 4760, January 2007. [RFC5492] Scudder, J. and R. Chandra, "Capabilities Advertisement with BGP-4,"BGP-4", RFC 2842, May 2000. [BGP-DYN-CAP]5492, February 2009. 12.2. Informative References [I-D.ietf-idr-dynamic-cap] Chen, E. and S. Sangli, "Dynamic Capability for BGP-4," Work in Progress (draft-ietf-idr-dynamic-cap-03), December 2002. 10. Security Considerations This document introduces no new security vulnerabilities to BGP or other specifications referenced in this document. 11. IANA Considerations TBD 12.BGP-4", draft-ietf-idr-dynamic-cap-09 (work in progress), November 2006. [RFC2918] Chen, E., "Route Refresh Capability for BGP-4", RFC 2918, September 2000. Authors' Addresses John G. Scudder Juniper Networks Email: email@example.com Chandrashekhar (Chandra)Chandra Appanna Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 e-mail:Systems Email: firstname.lastname@example.org 13. Intellectual Property Statement The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at email@example.com. 14. Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 15. Copyright Statement Copyright (C) The Internet Society (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.